What is the Cisco IP phone 8800 series?
The Cisco IP Phones 8811, 8841, 8845, 8851, 8851NR, 8861, 8865, and 8865NR deliver easy-to-use, highly secure voice communications. Figure 1. The Cisco IP Phone 8800 Series The following table shows the major hardware features of the Cisco IP Phone 8800 Series. Table 1. Cisco IP Phone 8800 Series Major Features
How do I make or receive a video call on 8800?
To make or receive a video call, you must use the Cisco IP Phone 8845, 8865, or 8865NR. The other phones in the Cisco IP Phone 8800 Series only support audio calls. When you add features to your phone, some features require a line button. But each line button on your phone can support only one function (a line, a speed dial, or a feature).
How do I get a certificate for my IP phone?
Each Cisco IP Phone requires a unique certificate for device authentication. Phones include a manufacturing installed certificate (MIC), but for additional security, you can specify certificate installation in Cisco Unified Communications Manager Administration using the Certificate Authority Proxy Function (CAPF).
Does the Cisco IP phone 8800 series support WPA/WPA2 and CCKM?
The Cisco IP Phone 8800 Series supports 802.11r (FT). Both 11r (FT) and CCKM are supported to allow for fast secure roaming. But Cisco strongly recommends to utilize the 802.11r (FT) over air method. With WPA/WPA2 and CCKM, encryption keys are not entered on the phone, but are automatically derived between the AP and phone.
What is authentication request?
How to locate phone in Cisco Unified Communications Manager?
What do Cisco system administrators do when they deploy a new IP telephony system?
What is activation code onboarding?
How many times can a phone send an authentication request?
How to connect a phone to a channel?
Can you create a wireless LAN profile?
See more
About this website
How do I check my Cisco phone certificate?
Verify What Certificates Are Installed On The Phone To check which certificates are installed on the phone navigate through the phone's menu by pressing the Settings button and going to Security Configuration. From this menu it will display the status of the MIC and LSC.
What is mobile and remote access?
The Mobile and Remote Access solution (MRA) supports a hybrid on-premises and cloud-based service model. This provides a consistent experience inside and outside the enterprise. MRA provides a secure connection for Jabber application traffic without having to connect to the corporate network over a VPN.
How can I remotely access my IP phone?
How do you remotely support an iPhone or iPad?Install the TeamViewer QuickSupport app on the iOS device.On the connecting device, open TeamViewer and enter the QuickSupport session ID provided on the iOS device, and establish the remote control connection.On the iOS device, allow remote control.More items...
How do I access my Cisco phone remotely?
0:066:49How to Access Phone Remotely - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo there are some quickly steps of what it needs to be done before you start accessing your phoneMoreSo there are some quickly steps of what it needs to be done before you start accessing your phone first of all change the enterprise. Parameter. Then register all IP phone to see you cm.
Is my phone being remotely accessed?
Signs That Someone Has Remote Access to Your PhoneYour phone constantly overheats even when not in use.It shuts down or crashes often.The battery drains quickly even when not in use.Higher data usage than usual.Noises in the background when you're on a phone call.You receive unusual messages, emails, or notifications.More items...
Can someone control my phone remotely?
Some spy apps are pretty easy to get hold of and can be used by a person without advanced IT knowledge. This lets them remotely monitor your phone activities. A person can install such an app by getting a direct access to your mobile device; A USB cable or charger lead could be used to hack your device.
Can you remote into an Android phone?
You can remote control Android devices via the remote control feature of AirDroid Personal. Even the Android device is far away from you. You can use the remote control feature to: Focus on your computer screen, enhance work efficiency.
How can I remotely control my Android phone?
Set up your virtual remoteOn your Android phone, open the Google TV app .Near the bottom right, tap Remote .At the top, tap Scanning for devices.Choose your device.To complete pairing, follow the instructions on your phone and TV.After pairing, you can use your phone or your remote.
Can you remotely control an iPhone camera?
You can also use Voice Control to remotely control the camera on your iPhone. That's because you can trigger the camera shutter with the volume buttons, which can also be controlled with your voice.
Can you forward Cisco phone remotely?
To enable call forwarding from a remote location, call into our Call Forwarding System. Step 1 Dial 208-287-5427. Step 2 Enter your ten digit phone number (desk phone) followed by the # key. Step 3 Then enter your web portal password followed by the # key.
How do I remotely forward my Cisco IP Phone?
Remote setup for Cisco phonesPress the “Forward All” softkey.Then enter the call forward target phone number exactly as you would dial it from your phone.To verify that your calls are forwarded, look for the “Forward All” icon in the line label, and the forwarding information in the header.
Can I connect Cisco IP phone at home?
Using Your Desk Phone at Home Companies that have Cisco Expressway will be able to bring Cisco 7800 and 8800 series phones home. They can register phones securely back to the corporate phone system. To power the phone, you will need a power supply or power injector. The phone can also directly connect to a home router.
Can you tell if someone is remotely accessing your computer?
You can use the Windows Task Manager on your computer to assess whether any programs have been opened on your computer without your knowledge. If you see programs in use that you did not execute, this is a strong indication that remote access has occurred.
How can I remotely access my Android phone?
When you (or your customer) run the SOS app on the Android device it will display a session code that you will enter on your screen to remotely view that device. Users with devices running Android 8 or higher will be prompted to turn on accessibility in Android to allow remote access.
What is a remote access tracker?
It collects data and copies files to provide remote real-time access to the end-user. These programs typically come with cloud-based control panels where the user can see the device's text messages, call logs, multimedia files, browser history, social media activities, and more.
Is MDM the same as remote management?
This is an area in which MDM software and RMM software overlap, because both provide remote management. Although RMM software tends to provide a much more extensive range of remote management features, MDM software specializes in mobile management features to help ensure assets remain under your purview.
Cisco Telephone Manuals and User Guides PDF Preview and Download
Download manuals & user guides for 884 devices offered by Cisco in Telephone Devices category. Choose one of the enlisted appliances to see all available service manuals.
Cisco IP Phone 8800 Series Quick Start Guide
Cisco IP Phone 8800 Series Quick Start Guide Copyright © 2020 Cisco Systems, Inc. All rights reserved. April 2020 Make a Call with a Headset 1.
Cisco IP Phone 8800 Series User Guide - Cisco
Bias-Free Language. The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality.
Cisco IP Phone 8841, 8851, and 8861 User Guide for Cisco Unified ...
Cisco IP Phone 8841, 8851, and 8861 User Guide for Cisco Unified Communications Manager 10.5 First Published: May29,2014 Last Modified: June06,2014 Americas Headquarters
Cisco IP Phone 8811, 8841, 8851, and 8861 User Guide for Cisco Unified ...
Cisco IP Phone 8811, 8841, 8851, and 8861 User Guide for Cisco Unified Communications Manager 10.5 First Published: September05,2014 Last Modified: September09,2014 Americas Headquarters
How to locate phone in Cisco Unified Communications Manager?
In Cisco Unified Communications Manager Administration, select Device > Phone and locate the phone.
What is a secure phone call?
Secure Phone Call Identification. A secure call is established when your phone, and the phone on the other end, is configured for secure calling. The other phone can be in the same Cisco IP network, or on a network outside the IP network. Secured calls can only be made between two phones.
What is Cisco phone security?
Cisco phones that support Wi-Fi have special web pages that are different from the pages for other phones. You use these special web pages for phone security configuration when Simple Certificate Enrollment Protocol (SCEP) is not available. Use these pages to manually install security certificates on a phone, to download a security certificate, or to manually configure the phone date and time.
What format does Cisco phone use?
The Cisco IP Phone supports ASCII and hexadecimal formats. You must use one of these formats when setting up a WPA Pre-shared key:
What is Cisco Unified Communications Manager 11.5?
You can enable Cisco Unified Communications Manager 11.5 (1) and 12.0 (1) to operate in an enhanced security environment. With these enhancements, your phone network operates under a set of strict security and risk management controls to protect you and your users.
What is SRTP in a device?
Uses SRTP to ensure that media streams between supported devices prove secure and that only the intended device receives and reads the data. Includes creating a media primary key pair for the devices, delivering the keys to the devices, and securing the delivery of the keys while the keys are in transport.
Does Cisco Unified Communications Manager 12.5 support enhanced security?
Cisco Unified Communications Manager 12.5 (1) does not support an enhanced security environment. Disable FIPS before upgrading to Cisco Unified Communications Manager 12.5 (1) or your TFTP and other services will not function properly. The enhanced security environment includes the following features:
Can you verify the validity of a certificate?
Once search is completed you can verify the validity of the certificate
Does Cisco 7800 have MRA?
Cisco IP Phones 7800/8800 Series fails to register over MRA if phone has expired Sectigo/Addtrust root certificate which expried on 30th May 2020 and Expressway has signed it certfictate from Sectigo/Addtrust CA.
What happens after mobile access through Expressway?
After Mobile and Remote Access Through Expressway is deployed, log in to the enterprise network when on-premises . The phone detects the network, and registers with Cisco Unified Communications Manager.
Why can audio and video traffic be sent to different RTP port ranges?
Audio and video traffic can be sent to different RTP port ranges in order to improve Quality of Service (QoS).
What is the primary line on an IP phone?
If this parameter is set to True, when a phone goes off-hook, the primary line is chosen and becomes the active line. Even if a call rings on the second line of the user, when the phone goes off-hook, it makes only the first line active. It does not answer the inbound call on the second line. In this case, the user must choose the second line to answer the call. The default value is set to False.
When a call that was routed via the hunt list is parked, what parameter is used?
When a call that was routed via the hunt list is parked, the Hunt Pilot Park Monitoring Forward No Retrieve Destination parameter value is used (unless it is blank) when the Park Monitoring Forward No Retrieve Timer expires.
Can a phone share firmware?
If the phone has a new firmware load, it can share that load with the other phones. If one of the other phones has a new firmware load, the phone can download the firmware from the other phone, instead of from the TFTP server. Peer firmware sharing:
Can you set up a phone to have a variety of features?
You can set up phones to have a variety of features, based on the needs of your users. You can apply features to all phones, a group of phones, or to individual phones.
Can you add IP phones to Cisco Unified Communications Manager?
After you add Cisco IP Phones to Cisco Unified Communications Manager, you can add functionality to the phones. The following table includes a list of supported telephony features, many of which you can configure by using Cisco Unified Communications Manager Administration.
What is Cisco 8800?
The Cisco IP Phone 8800 Series provide accessibility features for the blind, and the visually-, hearing-, and mobility-impaired. Because many of these features are standard, they can be used by users with disabilities without requiring any special configuration.
How long does a phone activation code last?
Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week. Contact your administrator if you don't know your code or if you need a new one.
What is voice feedback on Cisco phone?
Voice Feedback helps people vision problems to use their Cisco IP Phone . When enabled, a voice prompt helps you navigate your phone buttons, and to use and configure phone features. The voice also reads out incoming Caller IDs, displayed screens and settings, and button functions.
What is the phone screen?
The phone screen shows information about your phone such as directory number, active call and line status, softkeys, speed dials, placed calls, and phone menu listings. The screen is made up of three sections: the header row, the middle section, and the footer row.
Can Cisco 8865 access Wi-Fi?
The Cisco IP Phone 8861 and 8865 can access a Wi-Fi network. You need a power adapter to power the phone. The Cisco IP Phone 8865NR cannot be used with a Wi-Fi network.
What is the USB port on my phone?
You can use the USB ports on your phone to charge your mobile device if the device has a USB connection. The following ports support USB charging: Side port—Provides standard device charging. Back port (Cisco IP Phone 8861, 8865, and 8865NR only)—Provides standard device charging as well as fast-charging.
Can Cisco 8800 be mounted on a wall?
The Cisco IP Phone 8800 Series phones can be mounted on a wall using one of the following wall mount kits:
What is authentication request?
An authentication request is a confirmation of the user's sign-in credentials. It occurs whenever a phone that has already joined a Wi-Fi network tries to reconnect to the Wi-Fi server. Examples include when a Wi-Fi session times out or a Wi-Fi connection is lost and then reacquired.
How to locate phone in Cisco Unified Communications Manager?
In Cisco Unified Communications Manager Administration, select Device > Phone and locate the phone.
What do Cisco system administrators do when they deploy a new IP telephony system?
As they deploy a new IP telephony system, system administrators and network administrators must complete several initial configuration tasks to prepare the network for IP telephony service. For information and a checklist for setting up and configuring a Cisco IP telephony network, see the documentation for your particular Cisco Unified Communications Manager release.
What is activation code onboarding?
Activation Code Onboarding can be applied to individual phones, a group of phones, or across an entire network. This is an easy way for users to onboard their phones because they only enter a 16-digit activation code. Codes are entered either manually or with a QR code if a phone has a video camera.
How many times can a phone send an authentication request?
You can configure the number of times a Wi-Fi phone sends an authentication request to the Wi-Fi server. The default number of attempts is 2 , but you can set this parameter from 1 to 3. If a phone fails the authentication, then the user is prompted to sign in again.
How to connect a phone to a channel?
Connect the handset to the handset port and press the cable into the channel in the phone.
Can you create a wireless LAN profile?
You can create a wireless LAN profile group and add any wireless LAN profile to this group . The profile group can then be assigned to the phone when you set up the phone.
