Connect your DVR to your router Enter your DVR’s menu and go to networking to assign an internal IP and gateway this can be done automatically by selecting DHCP.The Local IP must be in the same Gateway range as the Router.
Full Answer
What ports do you use to access your DVR?
I have been able to setup the DVR on my local network and can access the DVR via a browser using the ports from the DVR. Defaults were 34567 and 80 for HTTP. I have since changed those ports but am still able to access so I know the ports themselves are working (right?)
What is H264 DVR?
H.264 has been engineered to provide the highest level of data compression possible (saving space on your hard drive) whilst maintaining a high image quality. The DVR features an Ethernet port, which can be used to connect the DVR to your local area network (LAN).
What are the inputs and outputs of a DVR?
1) CH1 ~ CH8 (Video Inputs): These are the eight camera inputs, labelled as per their channel in the DVR’s interface. Thus, plug the camera you want to be associated with Channel 1 into the port marked CH1 and so on. 2) Video Outputs: This sends a composite video signal out of the DVR.
Why choose the zmodo 8 channel security DVR?
This Zmodo 8 channel Security DVR is the very top of the line digital video recorder ensures high quality live viewing and recording that is a 34% increase over standard D1 resolution and 500% of CIF. You simply cannot find an analog based video transmission system that can record video in a higher resolution.
How do I setup my DVR for remote access?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
How do I setup my H 264 DVR?
0:004:15H.264 Surveillance DVR Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext plug the camera power cable into the DVR and connect to a power source the DVR will boot up youMoreNext plug the camera power cable into the DVR and connect to a power source the DVR will boot up you should see a live view of your cameras on the screen. Press the menu button on the DVR or remote.
How can I view my CCTV from anywhere?
Install viewing software. The viewing software may be proprietary to your CCTV provider. The best CCTV providers have a smart app that you can install on any mobile device and then track it yourself. Companies like Pro-Vigil offer viewing software for free that you can download to your mobile devices.
How do I connect my H 264 DVR to my iPhone?
0:002:06View Security Cameras on iPhone - H.264 Standalone DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo connect to your standalone DVR over the internet using your iPhone. First go to the App Store onMoreTo connect to your standalone DVR over the internet using your iPhone. First go to the App Store on your iPhone iPod or iPad. Once inside of the App Store search for km.
How do I connect my DVR to my phone?
0:316:00How to connect to a DVR using an Android Phone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. AndMoreThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. And the username and password to. Start we're going to click this icon right here on the top left corner.
What is the default password for H 264 DVR?
Most likely the default username will be admin and password: empty, 12345, or 123456.
Can I access my DVR remotely?
DVRs/NVRs that have a built-in network capability can be accessed over the internet remotely or outside your home network on a computer, desktop video surveillance software, phone apps or web browsers.
How can I remotely access my DVR without static IP?
Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.
Why can't I see my CCTV remotely?
What to Do If You Cannot Remotely View Security Cameras Using the Internet via Port Forwarding. Make sure your cameras are connected to the network. Ensure all the ports of the network configuration are mapped to the Internet. Open the firewall in the router to allow Internet access to the camera.
What is App of h264 DVR?
The MEye is an application for DVR remote monitoring. It runs on Android and IOS devices and is very easy to install and setup.
How do I view my DVR on my iPhone?
1:006:06How to connect to your DVR using an iPhone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe username will be the username you use to login to the DVR and the password as well lastly willMoreThe username will be the username you use to login to the DVR and the password as well lastly will be the channel amount how many channels or how many cameras you have on your DVR.
How do I view my security cameras on my iPhone?
0:296:33Security Camera System iPhone App View - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy tapping on the film reel icon on the bottom of the screen I switch the app from the live videoMoreBy tapping on the film reel icon on the bottom of the screen I switch the app from the live video view to recorded video playback mode.
What is the default password of DVR?
The default passwords for your DVR or NVR are the same as the username.
How do I reset my DVR to factory settings?
To factory reset the device, unplug the DVR from power. Once power is removed from the unit, press and hold the factory reset switch for 4 - 5 seconds, continue holding the reset switch and plug the DVR's power supply back into the unit, you will hear a beep.
Why does my CCTV says no signal?
A CCTV test monitor is extremely helpful when troubleshooting camera video issues. One of the most common problems when a camera is not displaying video is a bad cable or BNC connection. Using a test monitor, you can temporarily eliminate the power and video cable that your camera is using.
How do I connect my CCTV to the Internet?
Connect Your CCTV Device to the Internet (DVR or NVR)Step 1: Securing Your Device and Establishing Internet Connection. ... Step 2: Indirect Connection (Mobile APP) ... Step 3: Indirect Connection - PC Browser. ... Step 4: Direct Connection - Setup. ... Step 5: Direct Connection - Mobile APP. ... Step 6: Direct Connection - PC Browser.
What is 960h DVR?
960H is a new standard for security DVRs that provides high resolution images at an image size of 960 pixels horizontal and 480 pixels vertical. The DVR offers 960H (960x480) real-time recording on all 8 channels at 30fps.
How many FPS does a DVR record?
This DVR records at a verified real time (30 FPS) allowing completely smooth playback ensuring every detail is captured.
What is 960H security?
If Coupled with 700TVL high-resolution cameras, this DVR will produce the clearest Analog surveillance image possible for exceptional viewing on wide-screen monitors or TV screens, all while maintaining image integrity.
What is a Zmodo 8 channel DVR?
This Zmodo 8 channel Security DVR is the very top of the line digital video recorder ensures high quality live viewing and recording that is a 34% increase over standard D1 resolution and 500% of CIF. You simply cannot find an analog based video transmission system that can record video in a higher resolution. This DVR can record all channels simultaneously at a whopping 960H (approximately 960 x 480 pixels) resolution and at 30 frames per second (real time). With this 960H surveillance system, you can monitor high traffic areas with confidence in high resolution, and you will know you’ve picked a top-of-the-line security system at an affordable price.That’s when it time to move up to our premium 960H video surveillance system.
What is 960h DVR?
960H is a new standard for security DVRs that provides high resolution images at an image size of 960 pixels horizontal and 480 pixels vertical.The DVR offers 960H (960x480) real-time recording on all 8 channels at 30fps.
How many frames per second can a DVR record?
This DVR can record all channels simultaneously at a whopping 960H (approximately 960 x 480 pixels) resolution and at 30 frames per second (real time).
What compression does a DVR use?
The DVR utilizes H.264 compression to bring you great quality video while maximizing your hard drive storage capacity.
How to log into DVR?
To log into the DVR, you need to enter the logging-in DVR information. Find “Add” under the “Menu” then enter logging-in DVR’s IP address, Port number, account name and password. Press “Add” to save this information after entering.
What is the password for DVR?
To enter the main menu and set up DVR, log-in account and user password are required. The default password of the administrator is “123456”. Please check the “Account Setup” for related setup of other log-in users.
How to play irf files?
You can play the recorded .irf files by “File Play” in CMS. It allows you to change the display mode, forward or rewind the file and drag the time bar.
What is the purpose of a DVR spot?
SPOT setup is for controlling the order of channels the system cycles through in SPOT mode. User can monitor every channel in the SPOT mode.
Can DVR connections be deleted?
DVR connections can be added to or deleted from the CMS and their information can be edited. DVR’s channel names can be entered here or downloaded from the DVR by pressing ‘From
Can you remotely monitor DVR channels?
You can remotely monitor all channels of DVR through your mobile device. The required mobile application is from DVR manufacturer and it supports mobile OS for both Windows mobile 5.0 above and Symbian.
Can you display video on a remote CMS?
Video images recorded on a DVR can be displayed on a remote CMS. With Remote Play function, select a DVR and a display mode on top of the screen. After the recorded segments are listed below, double click on one to show its image on the right.
