What is the aircube AC?
With a compact design and integrated 24V PoE passthrough, airCube AC is a high-performance home Wi-Fi access point made to interoperate with airMAX CPE devices, with remote management by UISP. Max. Speeds Max. Power Consumption
What is the aircube ISP?
With a compact design and integrated 24V PoE passthrough, airCube ISP is a low-cost home Wi-Fi access point made to interoperate with airMAX CPE devices, with remote management by UISP. Note that a PSU is not included with airCube ISP. airCube ISP can be powered by a 24V passive PoE PSU, or via 5V micro USB.
What are the management options for the aircube AC?
The airCube AC requires the included power adapter or 24V, 1A PoE input. Management options feature a graphical user interface designed for streamlined setup and control. Available options include: UNMS Provides advanced remote control of Ubiquiti® devices. Use the UNMS™ app to manage your devices using a tablet or smartphone.
How do I login to the aircube?
NOTE: The device used to configure the airCube must be on the same network as the airCube itself. Enter ubnt for the Username, and type in the QR code password for the Password. Then click Login. NOTE: The QR code password can be found on the bottom of the airCube.
How do I access my airCube router?
Open the web browser and type the IP address of the device in the address bar (default is http://192.168.1.1). Press Enter. Type the username and password in the login page, the default username is 'ubnt' and the password can be found on the sticker on the bottom of the airCube.
How do I connect to my airCube ISP?
Connect one end of an Ethernet cable to the WAN Port on the back of the airCube. Connect the other end of the Ethernet cable to your airMAX CPE radio. 2. The airCube can be powered in one of two ways: 5V Micro USB adapter or 24V PoE on LAN Port 1.
What does the ubiquiti airCube do?
With a compact design and integrated 24V PoE passthrough, airCube AC is a high-performance home WiFi access point made to interoperate with airMAX CPE devices, with remote management by UISP. Features: 802.11ac 2x2.
How do you reset an airCube?
The LED lights up when the airCube is powered on. Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the LED starts flashing and then becomes solidly lit.
How do I update my airCube?
Update Firmware: Click “System” (gears icon) from black menu bar at left. Under “Device Maintenance” select “Upgrade Firmware.” (Alternatively, you can select this from the top right of the main dashboard). Select the firmware file from your computer, then proceed through the steps to Verify and Upgrade it.
How do I open ports on airCube?
Steps: How to Port Forward on airCubeNavigate to the airCube's LAN address. ... Update to the latest stable firmware version. ... Log in to the airCube's user interface and navigate to the Network page.Select the Port Forward tab.Click the Add New Rule button.More items...
What is Unms?
Ubiquiti Network Management System (Beta) 0) of our new Ubiquiti Network Management System - UNMS. This is built from the ground up for the WISP industry. UNMS gives you the tools to monitor and configure your UBNT devices from a single software solution.
What is Air Max Ubnt?
SCALABILTY -802.11 protocol (based on carrier sensing) was designed for indoor networks where clients can “hear” one another for indoor networks where clients can hear one another. AirMax Protocol (based on TDMA) was designed for outdoors; hidden nodes are no problem.
What is Ubiquiti airMAX?
The core of the airMAX platform is the Ubiquiti TDMA (Time Division Multiple Access) protocol, which provides high performance, capacity, and scalability for high-speed, carrier-class links.
How do I set up Ubiquiti airMAX?
Steps: Connect to Device Directly (via LAN)Connect the airMAX radio to the port labelled PoE on the power injector. ... Connect the airMAX radio to your network (as layer 2 network as your computer)Install WiFiman Desktop or check your DHCP servers lease table to find the radio MAC address and IP address assigned.More items...
What is an air cube?
Ubiquiti Networks introduces the airCube™, a cost-effective wireless access point for use in your customer deployments.
What voltage is needed for air cube?
The airCube AC requires the included power adapter or 24V, 1A PoE input.
How to install AirCube?
The airCube can be installed and configured using the UNMS™(Ubiquiti® Network Management System) app on your mobile phone or tablet. Follow these steps to ensure proper installation: 1. Download and install the UNMS app from the App Store (iOS) or Google Play™(Android). Ensure that Wi-Fi is enabled on your mobile phone or tablet. 2. Launch the UNMS app and proceed to the section that corresponds with your mobile device: Android Users or iOS Users.
How to power an air cube?
2. The airCube can be powered in one of two ways: 5V Micro USB adapter or 24V PoE on LAN Port 1. • If using a Micro-USB power adapter (not included) to power the airCube, connect the power adapter to the Power Porton the back of the airCube and the other end of the adapter to a power outlet.
How to add a device to a UNMS?
Installericon to add a new device to UNMS. 2. From the two options provided, select airCube. UNMS will activate a QR scanner using the camera function on your mobile device. 3. Scan the QR code located on the bottom of the airCube. Once the QR code is scanned, UNMS will return to the main app screen. 4. Exit UNMS and open the Settingsapp on your mobile device. 5. Select Wi-Fiand connect to the SSID for the airCube wireless network na med: airCu be-<MAC Address>
How to scan a QR code on an AirCube?
1. Tap the icon to add a new device to UNMS. 2. Select Discoverto scan for devices on the active Wi-Fi network range. 3. Tap the airCube device from the list. UNMS will activate a QR scanner using the camera function on your mobile device. 4. Scan the QR code located on the bottom of the airCube. Once the QR code is scanned, UNMS will return to the main app screen. 5. The Statusscreen appears. Verify connectivity to the airCube.
Is ACB-ISP in compliance with Directive 2014/53/EU?
English Hereby, UBIQUITI NETWORKS declares that the radio equipment type ACB-ISP is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
Can you return a UBIQUITI product without an RMA number?
No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at:
How to configure AirCube?
To configure the airCube using a web interface: Launch your web browser and go to: https://192.168.1.1. NOTE: The device used to configure the airCube must be on the same network as the airCube itself. Enter ubnt for the Username, and type in the QR code password for the Password. Then click Login.
Where is the password on an air cube?
NOTE: The QR code password can be found on the bottom of the airCube. It is labeled PSWD.