allow remote access server 2008

Enable Windows Server 2008 R2 Remote Desktop Services

• On the Windows® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. The Server Manager dialog...
• Click Roles, and then click Add Roles. The Select Server Roles page of the Add Roles Wizard appears.
• Select Remote Desktop Services, and then click Next. The Select Role Services page appears.

Full Answer

How do I enable remote desktop on Windows Server 2008?

– A Server with Windows Server 2008. To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information.

How to allow connections from computers running Remote Desktop?

Alternatively, you can also choose Allow Connections From Computers Running Any Version Of Remote Desktop (for allowing remote desktop connection sessions with pre Windows Server 2008 systems). Once done, click OK. Note: make sure to do this on systems that you wish to remotely make connections to and from.

How do I get Remote Desktop Services (RDS)?

Learn step by step how to get Remote Desktop Services (RDS) and some of the basic RDS components up and running. Launch Server Manager and select Server Roles. Once the roles manager screen is up, check the box for Remote Desktop Services.

How do I configure and monitor a VPN remote access server?

In this lesson, you will learn how to configure and monitor a VPN remote access server running Windows Server 2008 and Windows Server 2008 R2. To install the RRAS role service, use the Add Roles Wizard and then select Network Policy And Access Services. RRAS is a role service within this role.

How do I enable Remote Access to my server?

Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.

How do I give Remote Access permissions?

Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

How do I enable Remote Access to users?

How to enable Remote DesktopOn the device you want to connect to, select Start and then click the Settings icon on the left.Select the System group followed by the Remote Desktop item.Use the slider to enable Remote Desktop.It is also recommended to keep the PC awake and discoverable to facilitate connections.More items...•

How do I enable Remote Desktop Services?

Set up the PC you want to connect to so it allows remote connections:Make sure you have Windows 10 Pro. ... When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop.Make note of the name of this PC under How to connect to this PC.

How can I access a server from outside the network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How do I give someone access to my network?

Setting PermissionsAccess the Properties dialog box.Select the Security tab. ... Click Edit.In the Group or user name section, select the user(s) you wish to set permissions for.In the Permissions section, use the checkboxes to select the appropriate permission level.Click Apply.Click Okay.

How do I access a remote server using IP address?

Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.

What is enable remote connection?

This feature makes the connection more secure by requiring users to authenticate with the network before they can connect to the device. The settings page also displays the current Remote Desktop port if you need to configure a router to allow remote connections outside the network.

Why is Remote Desktop not working?

The most common cause of a failing RDP connection concerns network connectivity issues, for instance, if a firewall is blocking access. You can use ping, a Telnet client, and PsPing from your local machine to check the connectivity to the remote computer. Keep in mind ping won't work if ICMP is blocked on your network.

How do I enable Remote Desktop on Windows?

Using the Settings app, follow the steps below to enable remote access on Windows 10:Open Settings on a Windows 10 device and select “System”.Click “Remote Desktop”.Toggle the “Enable Remote Desktop” switch to “On”.Hit “Confirm”.

How can you Install enable and configure remote access services on server?

Install the Remote Access roleOn the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.Click Next three times to get to the server role selection screen.On the Select Server Roles dialog, select Remote Access, and then click Next.Click Next three times.More items...•

How do I change permissions on remote desktop?

This is typically done on your Office Computer.Click the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

What permissions do remote desktop users have?

By default, the Remote Desktop Users group is assigned the following permissions: Query Information, Logon, and Connect.

Do you need admin rights to Remote Desktop?

As per my knowledge, if you want your user to access the server remote session then it's not compulsory that they should be added under administrator group. But you must add the user under “Remote Desktop User” local group.

How can I tell who is accessing my remote desktop?

The easiest way to determine who has access to a particular Windows machine is to go into computer management (compmgmt. msc) and look in Local Users and Groups. Check the Administrators group and the Remote Desktop Users group to see who belongs to these.

Planning Your Terminal Services Gateway SSL Certificate

Because clients use HTTPS to connect to the TS Gateway, the TS Gateway will need an SSL certificate — just like an electronic-commerce Web server.

Configuring the Terminal Services Gateway

To add the Terminal Services Role to Windows Server 2008, follow these steps:

Configuring the Remote Desktop Client

You must configure the Remote Desktop Client with the IP address of the TS gateway before connecting to a Remote Desktop server on your internal network. To configure the Remote Desktop Client, follow these steps:

Need More Help?

For more information about Terminal Services in Windows Server 2008, visit technet2.microsoft.com/windowsserver2008/en/servermanager/terminalservices.mspx.

How to enable remote access to a server?

To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.

What is VPN in Windows Server 2008 R2?

Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.

How to configure NPS data?

You can configure which NPS accounting data is sent to the computer running SQL Server by selecting options in the SQL Server Logging properties dialog box shown in Figure 9-9. Clicking Configure in this dialog box allows you to specify the properties of the data link to the computer running SQL Server. When configuring the data link properties for the SQL Server connection, you must provide the server name, the method of authentication that will be used with the computer running SQL Server, and the database on the computer running SQL Server that you will use to store the accounting data. Just as it is a good idea to have a separate partition on a computer to store NPS accounting data, it is a good idea to have a separate database that stores NPS accounting data.

Why use IKEv2 over VPN?

The benefit of using IKEv2 over other protocols is that it supports VPN Reconnect. When you connect to a VPN server using the PPTP, L2TP/IPsec, or SSTP protocol and you suffer a network disruption, you can lose your VPN connection and need to restart it. This often involves reentering your authentication credentials.

What is EAP TLS?

Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.

How to configure a RADIUS client?

To configure a RADIUS client using NPS, open the Network Policy Server console from the Administrative Tools menu. Right-click RADIUS Clients and then click New RADIUS Client. This will open the dialog box shown in Figure 9-6.

When to use NPS as a proxy?

You should deploy NPS as a RADIUS proxy when you need to provide authentication and authorization for accounts from other AD DS forests. The NPS RADIUS proxy uses the realm name (which identifies the location of the user account) portion of a user name to forward the request to a RADIUS server in the target forest. This allows connection attempts for user accounts in one forest to be authenticated for the network access server in another forest. Using a RADIUS proxy for inter-forest authentication is not necessary when both forests are running at the Windows Server 2003 functional level or higher and a forest trust exists.

How to connect to a remote system?

You can simply enter the IP of the system that you wish to connect remotely to and hit Connect or configure advanced options for managing your connection. For instance, in the General tab, login credentials can be entered to automatically login to the system that you are connecting to (e.g. Domain admin credentials). To visit Advanced Options, click Options button to expand the interface.

How to remotely connect to a computer?

To make sure that your system can remotely connect, go to Computer (My Computer) Properties from the right-click context menu to enable incoming remote desktop connections. Click on Advanced System Settings and move over to the Remote tab. From here select Allow Connections Running Remote Desktop With Network Level Authentication ...

Question

The machine I am trying to remote desktop FROM is on the same network subnet as the 2008 server machine

Answers

Please check if the user account you use to log on Windows server 2008 is a member of remote desktop users as Tim suggested.