- Start Control Panel (Start - Settings - Control Panel)
- Select Add/Remove Programs.
- Select Configure Windows in the left hand pane.
- Click the Components button.
- Click Next at the wizard.
- Check the "Terminal Services" and "Terminal Services Licencing" components.
Can I remote control a Windows 2000 Pro system?
You have to use VNC, Remotely Possible, PC Anywhere, or other third party software to control a 2000 Pro system, and it will always be the console of the host system (which is actually all Remote Desktop can do on XP Pro anyway - only Windows Server 2003 and Windows 2000 Server support connections other than to the console).
How to allow users to RemoteDesktop in to Windows 2000 report server?
Under the RDP -Tcp properties I added the group Users to have permission to remotedesktop in to our Crystal report server, Windows 2000 server. It looks like it solved the problem of allowing users access our server without giving them any admin privileges.
How do I enable remote access on Windows 10?
You can configure your PC for remote access with a few easy steps. On the device you want to connect to, select Start and then click the Settings icon on the left. Select the System group followed by the Remote Desktop item. Use the slider to enable Remote Desktop.
How to allow users to access RDP server without admin privileges?
Under the RDP -Tcp properties I added the group Users to have permission to remotedesktop in to our Crystal report server, Windows 2000 server. It looks like it solved the problem of allowing users access our server without giving them any admin privileges. Glad that works. Allow Logon through Terminal Services should not require admin either FYI
How do I enable Remote Desktop on Windows 2000?
Click on the Windows 'Start' button. Right click on the 'Computer' icon and click on 'Properties. ' Click on the 'Remote' tab and put a check mark in the 'Enable Remote Desktop on this computer' option. By default, all members of the administrators group can connect using the Remote Desktop.
Does Windows 2000 have Remote Desktop?
Although most versions of Windows operating system such as Windows 2000, 2003, 2008, XP and Vista do come packaged with Remote Desktop, it's disabled by default.
How do I enable remote access on Windows?
Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I enable Remote Desktop in Windows XP?
How do I enable Remote Desktop in Windows XP?Right-click My Computer, and select Properties.Select the Remote tab.Select "Allow users to connect remotely to this computer."Click "Select Remote Users" if you want to add a non-Administrator user.Click Add.Select the users, and click OK.More items...
How do I set up remote access to my computer?
On your Windows, Android, or iOS device: Open the Remote Desktop app (available for free from Microsoft Store, Google Play, and the Mac App Store), and add the name of the PC that you want to connect to (from Step 1). Select the remote PC name that you added, and then wait for the connection to complete.
How do I know if Remote Desktop is enabled?
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services.If the value of the fDenyTSConnections key is 0, then RDP is enabled.If the value of the fDenyTSConnections key is 1, then RDP is disabled.
How can I access my computer remotely?
Set up remote access to your computerOn your computer, open Chrome.In the address bar, enter remotedesktop.google.com/access .Under “Set up Remote Access,” click Download .Follow the onscreen directions to download and install Chrome Remote Desktop.
Does Windows XP support Remote Desktop?
With the Remote Desktop feature in Windows XP, you can remotely control a computer from another office, from home, or while traveling. This allows you to use the data, applications, and network resources that are on your office computer, without being in your office.
Can Windows 10 RDP to Windows XP?
Yes Remote Desktop connection in Windows 10 will work to connect to Windows XP if and only if it is of professional edition.
How do I turn on firewall in Windows XP?
How to enable or disable Windows firewall in Windows XP?Open the Network Connections in Control Panel, right click the network connection icon with firewall function which user wants to enable, click Properties. ... Click Advanced in (Connection name) Properties.More items...•
How do I enable Remote Desktop remotely?
Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I remotely enable remote administration?
Double-click Computer Configuration>Administrative Templates>Network>Network Connections>Windows Firewall. Double-click Domain Profile>Windows Firewall: Allow remote administration exception. Select Enabled. Click Apply.
Why is Remote Desktop not working?
The most common cause of a failing RDP connection concerns network connectivity issues, for instance, if a firewall is blocking access. You can use ping, a Telnet client, and PsPing from your local machine to check the connectivity to the remote computer. Keep in mind ping won't work if ICMP is blocked on your network.
What is a remote access server?
The term “remote access server” can refer to a server that performs a range of remote access services, instead of just providing the ability for clients to dial into the company LAN. Both Windows 2000 Professional and Windows 2000 Server can act as remote access servers, albeit with different restrictions on each platform.
What is Windows 2000 RRAS?
The Windows 2000 RRAS service provides many different things for your network. One of the most common purposes it serves is as a remote access server. In this Daily Drill Down, I’ve shown you how to configure Windows 2000 to function as a remote access server . In the next Daily Drill Down in this series, I’ll show you how to create RRAS policies and implement VPNs using the Windows 2000 RRAS.
What type of connection is right for you?
In deciding which type of connection is right for you, check with your local communications provider to determine what services they offer. Some services, such as ADSL, may not be available in your area. If you can’t get ISDN or ADSL, for example, you’ll probably have to choose between PSTN and digital 56 Kbps. The speed at which your users need to connect will be the primary deciding factor in your decision, but cost will no doubt be a major consideration as well.
What is a RAS connection?
A RAS connection that connects the client to the dial-up server is called a point-to-point remote access connection. A RAS connection that connects the client to the LAN is called a point-to-LAN remote access connection. Regardless of the type, the remote clients can access resources on the server or LAN as if their computers were connected locally to the server or LAN. For example, clients can open and save files and use printers, just as they can locally.
How to assign IP addresses to RAS clients?
IP address assignment: If you’re using TCP/IP as one of the network protocols for RAS clients, you need to decide how IP addresses are assigned to the clients. You can assign addresses through DHCP if a DHCP server is available on the network. If no DHCP server is available, the server assigns IP addresses automatically. Or, you can specify a range of addresses the server will use to assign address leases to clients. If you choose this latter option, the wizard prompts you to specify the address range.
Can a RRAS server be used for multiple clients?
On the Windows 2000 Professional side, you can configure a workstation to allow incoming connections through dial-up (one at a time), giving the remote caller the ability to use resources stored on the local computer or on the LAN, depending on how RRAS is configured. Under Windows 2000 Server, RRAS can support multiple concurrent remote access clients for those same purposes, essentially limited only by the number of available incoming connections. For example, if you have a modem pool of 48 modems, Windows 2000 Server will support all of those connections concurrently.
Can you use a ras for authentication?
Use RADIUS: You can choose at this point to configure RRAS to use RADIUS for authentication, specifying the IP addresses or DNS names of the primary and secondary RADIUS servers, as well as the RADIUS secret. You can choose not to configure RADIUS if you’ll be using Windows 2000 integrated authentication or want to configure RADIUS properties later.
When did Windows 2000 end?
More than that, though, you should be aware that Windows 2000 reached end of life on July 13, 2010. No new updates or security patches have been released for some time now. Continuing to use this system is dangerous and irresponsible.
Does MS link require W2K?
Unfortunately, the instructions in that MS link require using the W2K server CD, but the question was about RDP’ing to a W2K-Pro system.
Question
Is there a way to allow users, other that admin, to remote desktop into a windows 2000 machine?
Answers
Are you asking about remote administration mode? If so add the users to Control Panel|Admin Tools|Local Security Policy|Security Settings\Local Policies\User Rights\Allow Logon through Terminal Services
All replies
Are you asking about remote administration mode? If so add the users to Control Panel|Admin Tools|Local Security Policy|Security Settings\Local Policies\User Rights\Allow Logon through Terminal Services
Precam
i have a computer with windows 2000 pro on it. And i want to make a remote connection to this computer.
getwired
Unfortunately Terminal Services for Remote Administration (what became Remote Desktop with XP/2003) is only in Windows XP and newer, it isn't possible with Windows 2000.
getwired
This is one of the things that made "Windows Smart Displays" not successful - that and the fact that they were too small, and too expensive. The fact that you couldn't have more than one user on a system at one time.
zillah
I just want to double check with you......you are looking to login in to your windows2000 Pro remotly,,,,,Arn't you?. Because I am bit confused with the topic name
01communique
Try a new remote access software called I'm InTouch! With this product you can remotely access your home or work PC from
Marsden
Just upgrade Pro to Win2K server... then the support you need is built in...
How to allow remote access to PC?
The simplest way to allow access to your PC from a remote device is using the Remote Desktop options under Settings. Since this functionality was added in the Windows 10 Fall Creators update (1709), a separate downloadable app is also available that provides similar functionality for earlier versions of Windows. You can also use the legacy way of enabling Remote Desktop, however this method provides less functionality and validation.
How to remotely connect to Windows 10?
Windows 10 Fall Creator Update (1709) or later 1 On the device you want to connect to, select Start and then click the Settings icon on the left. 2 Select the System group followed by the Remote Desktop item. 3 Use the slider to enable Remote Desktop. 4 It is also recommended to keep the PC awake and discoverable to facilitate connections. Click Show settings to enable. 5 As needed, add users who can connect remotely by clicking Select users that can remotely access this PC .#N#Members of the Administrators group automatically have access. 6 Make note of the name of this PC under How to connect to this PC. You'll need this to configure the clients.
How to connect to a remote computer?
To connect to a remote PC, that computer must be turned on, it must have a network connection, Remote Desktop must be enabled, you must have network access to the remote computer (this could be through the Internet), and you must have permission to connect. For permission to connect, you must be on the list of users. Before you start a connection, it's a good idea to look up the name of the computer you're connecting to and to make sure Remote Desktop connections are allowed through its firewall.
Should I enable Remote Desktop?
If you only want to access your PC when you are physically using it, you don't need to enable Remote Desktop. Enabling Remote Desktop opens a port on your PC that is visible to your local network. You should only enable Remote Desktop in trusted networks, such as your home. You also don't want to enable Remote Desktop on any PC where access is tightly controlled.
How many concurrent connections can you RDP into a 2000 server?
But I found a MS KB that explains how to allow anyone to RDP into a 2000 server, with the limit of two concurrent connections.
How to add groups in Windows 10?
To add additional groups or users: Click Start, point to Programs, point to Administrative Tools, and then click Terminal Services Configuration. in the tree in the left pane, click Connections. Click the RDP-TCP connection in the right pane, and then click Properties on the Action menu. Click the Permissions tab.
Do we still have Windows 2000?
First off yes, we still have windows 2000 server s around. I have about 7 left, they are running old legacy applications that are no longer supported (Jet forms anyone?). Gotta love those type of applications
How to get remote desktop on XP?
To get remote desktop on XP machines click the system Icon in the control panel, then click the remote tab. Remote assistance and remote desktop are on the same page. for us to give you a suggestion on why you can remote in from your system but not remote in to your system, we need to know how they are connected together.
Does Windows 200 have terminal services?
Windows 200 workstation does not have terminal services, so if you don't see it in add/remove programs, that's probably what you are using.