allow remote access windows server 2008 r2

Enable Windows Server 2008 R2 Remote Desktop Services

• On the Windows® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. The Server Manager dialog...
• Click Roles, and then click Add Roles. The Select Server Roles page of the Add Roles Wizard appears.
• Select Remote Desktop Services, and then click Next. The Select Role Services page appears.

Full Answer

How do I set up remote desktop on Windows Server 2008 R2?

On the Windows® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. The Server Manager dialog box appears. Click Roles, and then click Add Roles. The Select Server Roles page of the Add Roles Wizard appears. Select Remote Desktop Services, and then click Next.

How do I get Remote Desktop Services (RDS)?

Learn step by step how to get Remote Desktop Services (RDS) and some of the basic RDS components up and running. Launch Server Manager and select Server Roles. Once the roles manager screen is up, check the box for Remote Desktop Services.

How do I enable remote desktop services in the roles manager?

Once the roles manager screen is up, check the box for Remote Desktop Services. Some other boxes may already be checked, but this is fine -- the only box you need to worry about for this step is the Remote Desktop Services box.

How to provide users with remote desktop and application access?

To provide users with remote desktop and application access through Remote Desktop Services, open Control Panel -> System and Security -> System -> Remote settings and click on the Select Users button to invoke the Remote Desktop Users dialog illustrated in the following figure: <google>ADSDAQBOX_FLOW</google>

How do I install Remote Desktop Services on Windows Server 2008 R2?

How to configure Remote Desktop in Windows Server 2008 R2 step by...Step 1: Begin the installation. ... Step 2: Select Remote Desktop Services roles you want to install. ... Step 3: Pick the license mode. ... Step 4: Allow access to Remote Desktop Session Host (not required) ... Step 5: Configure the client experience.More items...•

How do I enable Remote Access to a Windows server?

Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

How do I enable Remote Access to users?

How to enable Remote DesktopOn the device you want to connect to, select Start and then click the Settings icon on the left.Select the System group followed by the Remote Desktop item.Use the slider to enable Remote Desktop.It is also recommended to keep the PC awake and discoverable to facilitate connections.More items...•

How do I enable Remote Desktop Services?

Set up the PC you want to connect to so it allows remote connections:Make sure you have Windows 10 Pro. ... When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop.Make note of the name of this PC under How to connect to this PC.

How do you check if RDP is enabled on a server?

Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services. If the value of the fDenyTSConnections key is 0, then RDP is enabled. If the value of the fDenyTSConnections key is 1, then RDP is disabled.

Why can't I RDP to my server?

The most common cause of a failing RDP connection concerns network connectivity issues, for instance, if a firewall is blocking access. You can use ping, a Telnet client, and PsPing from your local machine to check the connectivity to the remote computer. Keep in mind ping won't work if ICMP is blocked on your network.

How can I access a server from outside the network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How can I access a server from outside the network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How do I enable Remote Assistance in Windows Server 2019?

Expand the Computer Configuration/Policies/Software Settings/Administrative Templates/System/Remote Assistance node and open the Offer Remote Assistance rule. Check the Enabled radio button. Under Options: select Allow helpers to remotely control the computer from the drop down list.

How do I enable Remote Desktop Services in Windows Server 2019?

To do this, follow these steps:Open Server Manager.Click Manage and select Add Roles and Features.Select Role-based or Feature-based installation.Select the computer as the destination server.On the Select server roles page, select Remote Desktop Services.More items...•

How do I enable Remote Desktop on Windows Server 2016?

Allowing Remote DesktopOpen Server Manager. ... Within the Server Manager window, select Local Server from the left hand side. ... Click on the Disabled text which will open the System Properties window in the Remote tab.From the System Properties window, select “Allow remote connections to this Computer” as shown below.More items...•

What is Server Manager 2008 R2?

Server to server – Server Manager on a full installation of Windows Server 2008 R2 can be used to manage roles and features that are installed on another server that is running Windows Server 2008 R2.

Can you remotely manage a server 2008 R2?

Windows Server 2008 R2, unlike Windows Server 2008 RTM, has a nice feature that allows you to remotely manage it, from another server or from a Windows 7 workstation , by using Server Manager.

Can you use Server Manager in Windows Server 2008 RTM?

Note: Windows Server 2008 RTM also has remote management capabilities. You can easily manage these servers by using almost any MMC Snap-In. However, the fact that you can use Server Manager to do it is new in R2.

How to access remote desktop settings?

To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.

Who has access to remote desktop?

Remote Desktop Users. Administrators have access by default.

Can you restrict remote desktop access to a few users?

Normally, all servers have Remote Desktop enabled for all users. While this works well, you may want to restrict remote desktop access to a few select users. To do this, click on the third option then click on the Select Users… button.

Can you modify user access for remote desktop?

All user access for Remote Desktop can be modified from here in the future. Once you see that the user is added to the list, click OK. Note that as long as Remote Desktop is enabled the Administrator account will always have access. You can then click Apply to apply the settings to the server and OK to exit the configuration.

How to add remote desktop services to Windows Server 2008 R2?

Windows Server 2008 R2 Remote Desktop Services may be installed from the Server Manager tool. Within Server Manager, click on Roles in the left hand pane and click on Add Roles in the resulting screen to invoke the Add Roles Wizard. If the introductory screen appears, click on Next to list the available roles. On the Select Server Roles screen, select Remote Desktop Services and click on Next to select the specific services required. For the purposes of this chapter just the basic Remote Desktop Session Host option needs to be selected (the other options will be covered in subsequent chapters):

How to switch between remote sessions?

To switch between sessions simply click on the name of the session in the left hand panel and the corresponding desktop will be displayed.

How to invoke Remote Desktop Client?

To invoke the Remote Desktop Client select Start -> All Programs -> Accessories -> Remote Desktop Connection or enter the following in the Run dialog or at a command prompt:

What happens when you exit a remote desktop session?

When the Remote Desktop Client is exited by pressing the 'X' on the control panel the remote session continues to run on the server even though no client is connected. Next time the user connects the desktop session will appear exactly as it was left before.

What is remote desktop services?

Remote Desktop Services provides both remote desktop and remote application access. Under remote desktop access an entire desktop session running on the server is displayed on the client. The user then interacts with the desktop to launch and interact with applications (details on installing applications for use with Remote Desktop Services is covered in Installing Applications for Windows Server 2008 R2 Remote Desktop Services ). In the case of remote applications, the remote application running on the server appears in its own window on the client desktop, to all intents and purposes looking like a local application to the user. Remote applications are covered in detail in Configuring RemoteApps on Windows Server 2008 R2 .

How to close a remote desktop session?

To end the session select Start in the remote desktop session, click on the right arrow button in the bottom right hand corner of the menu and select Log Off. This will close down the remote desktop session and close the remote desktop client.

How to change configuration options for each session?

To change configuration options for each session right click on the desired session in the left hand panel and select Properties. This panel has a number of tabs which enable credentials, screen size and program start properties to be defined. Having configured Remote Desktop Services on a Windows Server 2008 R2 system, the next step is to install applications suitable for remote access as outlined in the next chapter.

Planning Your Terminal Services Gateway SSL Certificate

Because clients use HTTPS to connect to the TS Gateway, the TS Gateway will need an SSL certificate — just like an electronic-commerce Web server.

Configuring the Terminal Services Gateway

To add the Terminal Services Role to Windows Server 2008, follow these steps:

Configuring the Remote Desktop Client

You must configure the Remote Desktop Client with the IP address of the TS gateway before connecting to a Remote Desktop server on your internal network. To configure the Remote Desktop Client, follow these steps:

Need More Help?

For more information about Terminal Services in Windows Server 2008, visit technet2.microsoft.com/windowsserver2008/en/servermanager/terminalservices.mspx.