allow remote access xp pro

To enable Remote Desktop, follow these steps:

• Log on to your Windows XP Professional–based computer using an Administrator account.
• Click Start, right-click My Computer, and then click Properties.
• In the System Properties sheet, click the Remote tab.
• Select the Allow users to connect remotely to this computer check box. Note You must be logged on as an Administrator...

Full Answer

How do I enable remote access on Windows XP?

So if you want your Windows XP computer to be remotely accessed, here are easy steps you should do to enable remote access on Windows XP computers: Log in to your Windows XP computer as an administrator. Make sure that your computer has a password set up. Right-click My Computer. Then, select Properties.

How to use remote desktop on Windows XP Home Edition?

Such Remote Desktop connections can be made via a LAN , WAN or modem connection. for Windows XP Home Edition. is not activated. Remote Desktop ! to this computer. Desktop connections. You need to “Select Remote Users..”: your system. other users will have to be added. advising that the system is in use. on Windows XP Home and Windows XP Prof).

How to allow remote desktop connections on Windows 10?

So far we’ve just fulfilled the requirements, but now we have to actually allow remote desktop connections to this computer. Go to Start, Control Panel, and click on System. Click on the Remote tab and make sure that the “Allows users to connect remotely to this computer” box is checked.

Can non-Windows XP systems access Windows systems running Windows Remote Desktop?

Non-Windows XP systems can also access Windows systems running Windows Remote Desktop. The local system used to access the remote computer must have the remote connectivity client software installed. To install the required Terminal Services components:

How to allow remote access to XP?

Why is remote access not working?

What type of connection does Windows XP support?

How to call back a remote user?

What is the TCP/IP properties box?

Why is my remote user disconnected?

What is the difference between a remote access connection and an on-site connection?

See more

About this website

Can you Remote Desktop into Windows XP?

With the Remote Desktop feature in Windows XP, you can remotely control a computer from another office, from home, or while traveling. This allows you to use the data, applications, and network resources that are on your office computer, without being in your office.

How do I give permission for remote access?

Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

How do I enable remote administration enabled?

Double-click Computer Configuration>Administrative Templates>Network>Network Connections>Windows Firewall. Double-click Domain Profile>Windows Firewall: Allow remote administration exception. Select Enabled. Click Apply.

Can Windows 10 Remote Desktop to Windows XP?

Yes Remote Desktop connection in Windows 10 will work to connect to Windows XP if and only if it is of professional edition.

How do I enable Remote Desktop without admin rights?

Go to the GPO section Computer Configuration -> Windows settings -> Security Settings -> Local policies -> User Rights Assignment; Find the policy Allow log on through Remote Desktop Services; After the server is promoted to the DC, only the Administrators group (these are Domain Admins) remains in this local policy.

What is remote admin access?

Alternatively referred to as remote administration, remote admin is way to control another computer without physically being in front of it. Below are examples of how remote administration could be used. Remotely run a program or copy a file. Remotely connect to another machine to troubleshoot issues.

How do I log into Remote Desktop as administrator?

How to: How to set up Remote Desktop (RDP) with admin rightsStep 1: Open up a command prompt. ... Step 2: Type (without quotes) "mstsc /v:00.00.00.00 /admin" (00 are ip address)Step 3: Logon using your admin credentials, thats it.

How do I run a Remote Desktop as administrator?

Click Start - Run and type mstsc /?. You should see a window popup and shows you "/admin" or "/console" , it depends on which OS system you are using. Then you can click Start - Run and type mstsc /admin or mstsc /console to run the Remote Desktop Connection using the Console User.

Why remote administration is needed?

It allows users to access the system they need when they can't be available physically for connecting. To put, users access the systems remotely through telecommunications or internet connection. Remote Access Services is effectively used by organizations for internally connecting networks and the system as well.

Does Chrome Remote Desktop work on Windows XP?

Chrome Remote Desktop is fully cross-platform. Provide remote assistance to Windows, Mac and Linux users, or access your Windows (XP and above) and Mac (OS X 10.6 and above) desktops at any time, all from the Chrome browser on virtually any device, including Chromebooks.

Is TeamViewer 15 compatible with Windows XP?

But please be aware that outgoing connections from TeamViewer can only connect to a remote device running the same or lower version of TeamViewer. This means you won't be able to connect from Windows XP/Vista/2003/2008 to a remote computer running TeamViewer 15, for example.

Can Windows XP Connect to Server 2016?

Windows XP though is using SMB 1.0, which is by default disabled on Windows Server 2016. You have to lower the security on Windows Server 2016 to enable SMB 1.0. And that is not recommended. Furthermore, as long as it works, it works.

What permissions do remote desktop users have?

By default, the Remote Desktop Users group is assigned the following permissions: Query Information, Logon, and Connect.

How can I access another computer?

Access a computer remotelyOn your computer, open Chrome.In the address bar at the top, enter remotedesktop.google.com/access , and press Enter.Click Access to select which computer you want.Enter the PIN required to access another computer.Select the arrow to connect.

Which permission needs to be assigned to a user to be able to connect to a VPN connection?

Remote Access Permission (Dial-in or VPN) This option button specifies whether the user can connect to the network via a dial-up or VPN connection.

Which permission allows a user access to a resource?

Authorization: the process that defines that resources an authenticated user may access and what he or she may do with those resources. Authorization for Windows files and folders is controlled by the NTFS file system, which assigns permissions to users and groups.

How to allow remote access to XP?

If you want to limit access to the XP remote access server computer only, select the Networking tab in the Incoming Connections Properties box. Click Internet Protocol (TCP/IP) and click the Properties button. On the Incoming TCP/IP Properties page, uncheck the box under Network Access that says Allow Callers To Access My Local Area Network.

Why is remote access not working?

Many remote access problems are caused by configuration or hardware difficulties at the client end.

What type of connection does Windows XP support?

There are two different types of incoming remote access connections supported by Windows XP: dial-up and virtual private networking (VPN). There are advantages and disadvantages to each. To accept incoming dial-up connections, you need a modem and phone line attached to the remote access server computer. The client that is dialing in will also need a modem and phone line. To accept incoming VPN connections, the remote access server computer must be connected to an always-on Internet connection (such as DSL, cable, T-carrier, or dedicated ISDN).

How to call back a remote user?

To do this, click the Users tab of the Incoming Connections properties sheet, highlight the user for whom you want to require callback, and click the Properties button.

What is the TCP/IP properties box?

The Incoming TCP/IP Properties box has a checkbox that you can check to allow calling computers to specify their own IP address instead of assigning them one via DHCP or from a defined range.

Why is my remote user disconnected?

The first thing to check is the Users tab, to ensure that the account has been given the right to connect remotely . Another problem may be that you have configured the remote access server to require all users to secure their passwords and data. You can uncheck this box on the Users tab or instruct the users to use securely encrypted passwords and data.

What is the difference between a remote access connection and an on-site connection?

The big difference between a remote access connection and an on-site one is speed; at the physical level, the phone lines are a much slower means of transmission than the Ethernet used to connect computers on-site. If the computer from which you’re connecting (the remote access client) has the Windows Terminal Services client or ...

What is remote access?

Remote access gives users the ability to log in to a computer, network or server from a remote location. Remote access is a great and easy way to connect to another computer or network and access all data saved in it. With this, users can get tasks done without even being physically present in their computer’s location.

What is remote access technology?

Businesses and organizations have become the entities who mostly used remote access technology in their networks. Remote access gives their employees the privilege to respond immediately to business requirements and perform tasks without being physically present in the office. Employees will have access to all their work’s computer programs, files, and network resources using any of their personal devices.

How much user share does Windows XP have?

Despite being released almost 20 years ago , Windows XP still has a 5% user share recorded in May 2018. If you happen to be a Windows XP user and want to enable remote access to your computer, you are in the right place. In this article we will tackle how to remote access Windows XP computers. Remote access gives users the ability to log in ...

How to enable remote desktop access?

To ensure a remote system is configured to support Remote Desktop, follow these steps: Click Start. Click Control Panel. Select Performance and Maintenance and click System (if the view is set to Category; if the Classic View is in use simply click the Control Panel’s System applet).

What is remote desktop in Windows XP?

Microsoft Windows XP's Remote Desktop application biggest benefit is that it provides access to a desktop as if you were sitting in front of the system. Follow these steps to configure Windows Remote Desktop and administer systems remotely.

What operating system is used to host a remote desktop?

The local system (the PC connecting to the remote desktop that will serve as the host) must be running Windows XP Professional (or a Windows 2003-flavor server) or have the appropriate Terminal Services tools installed.

How to open remote desktop?

The older Windows system can now open the Remote Desktop Connection menu by clicking Start | Programs | Accessories | Communications | Remote Desktop Connection or by opening a command prompt and typing mstsc.

How to access Windows firewall?

Access the Windows Firewall menu (by clicking Windows Firewall using Control Panel’s Category View or by clicking Security Center and selecting Windows Firewall using the Classic Vew).

Where to insert Windows XP Professional CD?

Insert a Windows XP Professional CD in the local system’s CD or DVD drive.

Can I access network shares on Windows XP?

In addition to receiving the actual desktop GUI, you can access network shares and printers as if seated at the PC. While remote users can request help using Windows XP’s Remote Assistance feature, often administrators must update settings and make configuration changes to remote machines.

How to connect to a remote desktop?

Go to Start, Control Panel, and click on System. Click on the Remote tab and make sure that the “Allows users to connect remotely to this computer” box is checked. Don’t worry about clicking the Select Remote Users button because Administrators have access by default. If you want to give an non-administrator account remote desktop access, then click that button and add the user.

How to connect to XP from another computer?

In order to connect, go to the other computer and click on Start, All programs, Accessories, Communications, and Remote Desktop Connection. If you want to connect to the XP machine from Windows Vista, Windows 7 or Windows 8, just click on Start ...

How to connect to XP from Windows 7?

If you want to connect to the XP machine from Windows Vista, Windows 7 or Windows 8, just click on Start and perform a search for remote desktop connection. On Windows 8, go to the Start Screen and start typing to perform a search. In the dialog box, you can type in the IP address or the name of the computer. ...

How to connect to a computer with an IP address?

In order to get the IP address of the computer you want to connect to, go to the computer and click on Start, Run and type in CMD. In the black command window, type in the word “ ipconfig ” without the quotes as shown below and press Enter.

What port does remote desktop use?

Be default, remote desktop uses port 3389, so type that into both the internal and export port boxes. Lastly, the internal IP address should be the IP address of the XP machine. On some setups, you’ll be asked for a starting port, ending port and triggering port. Just put 3389 for any port boxes.

How to get a public IP address?

First, you have to get your public IP Address (not the 192.168.x.x number) and you can do this by going to the computer you want to connect into and navigating to the web site http://www.whatismyip.com/ and this will give you your public IP address. This is the address that can be used from anywhere in the world to connect to your specific location and is unique. Unfortunately, on most home connections, this public IP address changes often and without notice. Basically to solve that problem, you have to use dynamic DNS. I won’t go into much detail in this post, but read my other posts on how to configure it:

How to know if you are an administrator on a computer?

If you brought a computer from a store or got it straight from the manufacturer, the first user name you create is always an Administrator account. An easy way to check whether or not you are an Administrator is to go to Start, Control Panel and then click on User Accounts.

Question

I have noticed this topic has been covered many times in this forum, but I was unable to find any posts that related to my specific questions, so I apologize in advance if this has been covered.

Answers

Your user account must be a member, or a nested member of the Remote Desktop Users local group on your Windows client.

All replies

Your user account must be a member, or a nested member of the Remote Desktop Users local group on your Windows client.

How to allow remote access to XP?

If you want to limit access to the XP remote access server computer only, select the Networking tab in the Incoming Connections Properties box. Click Internet Protocol (TCP/IP) and click the Properties button. On the Incoming TCP/IP Properties page, uncheck the box under Network Access that says Allow Callers To Access My Local Area Network.

Why is remote access not working?

Many remote access problems are caused by configuration or hardware difficulties at the client end.

What type of connection does Windows XP support?

There are two different types of incoming remote access connections supported by Windows XP: dial-up and virtual private networking (VPN). There are advantages and disadvantages to each. To accept incoming dial-up connections, you need a modem and phone line attached to the remote access server computer. The client that is dialing in will also need a modem and phone line. To accept incoming VPN connections, the remote access server computer must be connected to an always-on Internet connection (such as DSL, cable, T-carrier, or dedicated ISDN).

How to call back a remote user?

To do this, click the Users tab of the Incoming Connections properties sheet, highlight the user for whom you want to require callback, and click the Properties button.

What is the TCP/IP properties box?

The Incoming TCP/IP Properties box has a checkbox that you can check to allow calling computers to specify their own IP address instead of assigning them one via DHCP or from a defined range.

Why is my remote user disconnected?

The first thing to check is the Users tab, to ensure that the account has been given the right to connect remotely . Another problem may be that you have configured the remote access server to require all users to secure their passwords and data. You can uncheck this box on the Users tab or instruct the users to use securely encrypted passwords and data.

What is the difference between a remote access connection and an on-site connection?

The big difference between a remote access connection and an on-site one is speed; at the physical level, the phone lines are a much slower means of transmission than the Ethernet used to connect computers on-site. If the computer from which you’re connecting (the remote access client) has the Windows Terminal Services client or ...