To use remote management, connect to another Wi-Fi network, other than your local AmpliFi network, or your devices mobile's internet. It might take a moment longer for the app to connect to your AmpliFi router when doing so over the cloud, but once connected, tap on the device to access its settings. Everything will look and work the same way.
Full Answer
How do I use the meshpoint with the Amplifi™ router?
Pair the MeshPoint with the AmpliFi™ Router to expand the coverage of an AmpliFi™ network or turn an existing router into a powerful mesh network. Add MeshPoints around your house as needed to eliminate dead spots in your home.
What is the Amplifi™ meshpoint HD (high density)?
The AmpliFi™ MeshPoint HD (High Density) features an adjustable super antenna. Pair the MeshPoint with the AmpliFi™ Router to expand the coverage of an AmpliFi™ network or turn an existing router into a powerful mesh network.
Can the Amplifi HD router be set up as an access point?
The standalone AmpliFi HD Router and MeshPoint can be set up as an access point with a 3rd party router by following this procedure: Note To add the AmpliFi router in bridge mode instead of a network extender, please refer to this article.
How do I enable remote access to my Amplifi system?
Remote access can be enabled using your Facebook or Google account. To enable remote access, go to the side menu as shown on page 20. Overview The system dashboard is displayed in the Overviewwindow. It provides an overview of the AmpliFi Wi-Fi system including network status, number of connected clients, and active download/upload speeds.
How do I access the AmpliFi web interface?
Does AmpliFi have a web interface?To access AmpliFi's web interface you must be connected to the AmpliFi network on your computer.Open a web browser and in the URL type in the router IP address. ... To log in, use your admin credentials: the same ones you would use to log into the AmpliFi mobile app.
Does AmpliFi alien have web interface?
Other than the mobile app, the Alien also has a one-page web interface you can get to by pointing a browser to its IP address, which by default is 192.168. 121.1, and using the same password for the mobile app to log in.
How can I access my modem remotely?
All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.
What does teleport to remote router mean?
Teleport is a unique VPN software that protects your data and online presence by granting you secure access to your home AmpliFi network, tunneling connections back to your home and masking your IP address.
What is AmpliFi Teleport?
AmpliFi Teleport is a complimentary service available to all AmpliFi users with no subscription or one-time fees. Secure network connection while traveling. Securely encrypt your device's network connection to guard private data and protect from hackers on public or hotspot connections.
Does AmpliFi support VPN?
The AmpliFi mesh system does not support any VPN software configurations on the router itself besides what AmpliFi Teleport offers. However, VPN software configured on your mobile devices or computers and not through the router itself should work on the AmpliFi network.
Can someone remotely access my router?
Can a Wi‑Fi router be hacked? It's entirely possible that your router might have been hacked and you don't even know it. By using a technique called DNS (Domain Name Server) hijacking, hackers can breach the security of your home Wi‑Fi and potentially cause you a great deal of harm.
How do I connect to WiFi from far away?
If you want to connect to your neighbor's wifi, which is a mile away, then the only way to get free internet from that far away is to have a directional antenna with a line of sight, or in layman terms, no barriers in between.
How do I access my router admin without IP address?
Enter the router's username and password in the login window. "Admin" is the most common default username. "Admin," "Password" or a blank password are the most common default passwords. If your router uses something different, it should be listed in the router's documentation.
How do you use Teleport AmpliFi?
Follow these steps to enable:Launch the AmpliFi App. ... Navigate to Guest tab > Teleport VPN and tap "Generate Code".This code can be used to create a VPN connection between two AmpliFi routers, as well as devices connecting using the AmpliFi Teleport app. ... Now to complete the VPN connection, launch the Teleport app.More items...•
Is AmpliFi secure?
All AmpliFi routers (HD, Gamer's, Instant and Alien) are protected by a built-in firewall. AmpliFi's firewall serves as a barricade between the outside internet and your home network. Only information requested by devices within your home network is allowed in or out.
How does Ubiquiti Teleport work?
How Does It Work? Go to Settings > Teleport & VPN in your UniFi Network application to configure and activate your Teleport VPN (admins only). Generate an invitation link to your console's VPN and share it with your desired recipient. The link expires in 24 hours and can only be utilized by a single device at a time.
How do I connect to AmpliFi Alien?
3:4318:52AmpliFi ALIEN Router Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then follow the instructions in the amplify app to set up your amplifier router. So they alsoMoreAnd then follow the instructions in the amplify app to set up your amplifier router. So they also have an email and online help information so if you need help they do have that there.
Is AmpliFi Alien a good router?
The AmpliFi Alien is a powerful and capable Wi-Fi 6 router that should meet the requirements of even the most demanding users. The router sports a slick design, it's easy to set up and use, and it performs incredibly well — even in demanding environments like multi-story homes.
How many devices can AmpliFi Alien support?
The third radio (4x4) can be enabled to enhance performance of 5 GHz WiFi 5 devices. AmpliFi Alien can be used as a stand-alone router, or you can add an unlimited number of AmpliFi Alien Routers for use as MeshPoints to expand range coverage.
How do I configure my AmpliFi router?
0:262:19AmpliFi HD Setup - How to Setup the AmpliFI Wifi System - YouTubeYouTubeStart of suggested clipEnd of suggested clipPower off your modem. Use the included ethernet cable to connect the modem to the router. Using theMorePower off your modem. Use the included ethernet cable to connect the modem to the router. Using the internet port connect the power adapter to the router. And power on the modem. Once.
How to set up AmpliFi?
1. Launch the AmpliFi app. 2. Select Setup AmpliFi Standalone MeshPoint. 3. Select the standalone router or mesh point to be set up. 4. Select a local network for it to extend. 5.
How to add AmpliFi to Alien network?
This will mean it is ready for adoption. Option 1: Launch the AmpliFi app and select Add to network to add the router discovered to the mesh network.
How to tell if MeshPoint is ready to be added?
Plug in your AmpliFi router or MeshPoint. The MeshPoint will have the 3 middle LEDs flashing, indicating that the MeshPoint is ready to be added.
Is Alien compatible with AmpliFi?
The Alien line is only compatible with Alien products. AmpliFi HD, AmpliFi Instant and AmpliFi Gamer's Edition are compatible with each other but not with the Alien line. For more information, see this Compatibility matrix. How to Add an AmpliFi HD MeshPoint to an AmpliFi Network. How to Add an AmpliFi HD standalone router or Instant standalone ...
Does AmpliFi have a mesh point?
AmpliFi's different product lines allow for network expandability by adding standalone devices: MeshPoints or routers. Routers can be added wirelessly or via ethernet backhaul (see instructions below).
Can I use an AmpliFi router as an access point?
The standalone AmpliFi HD Router and MeshPoint can be set up as an access point with a 3rd party router by following this procedure:
How to reset a MeshPoint?
Factory default settings can be restored by using an object such as a straightened paper clip or pin to press the MeshPoint Reset for approximately 10 seconds until the LED turns o˚ and an audible tone is heard.
What do the three middle LEDs on a MeshPoint mean?
The three middle LEDs will continually ˜ash on and o˚ indicating a MeshPoint is ready for con˛guration.
How to use mesh multi hop?
Mesh multi-hop should only be used when necessary as performance will degrade with each hop. Mesh Multi-Hop Best Performance. 5. 1 Plug the MeshPoint into a power outlet. 2 The MeshPoint will be in the Ready to Addstate with the three middle LEDs ˜ashing on and o˚. 6.
How do LEDs indicate a meshpoint?
Searching for Network. The LEDs will indicate the MeshPoint is searching for the network by lighting up from the middle outwards. Connected. Once the MeshPoint is connected, the LEDs will represent the signal strength.
Can I return a UBIQUITI product without an RMA number?
No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.ampli˜.com/support/warranty
What is the front of an AmpliFi router?
The front of the AmpliFi Router features an adjustable, full-color touchscreen display. The bottom of the AmpliFi Router features an adjustable LED that is fully lit by default when the Router is configured and ready for use. The brightness settings of the touchscreen and LED are configurable using the AmpliFi app.
How to access live chat on Amplifi?
Tap the icon in the upper left of the app to access the side menu. Tap Live Supportfor 24/7 live chat support. Remote Access can also be enabled from this menu. Live chat is also available at help.amplifi.comby selecting Chat with usin the bottom right.
How long does it take to reset an AmpliFi router?
Resetlocated on the bottom of the AmpliFi Router for approximately 10 seconds until the LED turns off. If the AmpliFi Router is reset, all MeshPoints should also be reset using the same method.
What is the AmpliFi dashboard?
The system dashboard is displayed in the Overviewwindow. It provides an overview of the AmpliFi Wi-Fi system including network status, number of connected clients, and active download/upload speeds. Tap devices to display/edit settings.
Where should meshpoints be placed?
For best performance, the MeshPoints should be placed in different directions between the Router and the areas farthest from the Router. Mesh multi-hop should only be used when necessary as performance will degrade with each hop. Best Performance Mesh Multi-Hop. MeshPoint installation is optional and may not be necessary in smaller homes.
How many Ethernet ports are there for a 10/100/1000 Mbps connection?
1-4Four Gigabit Ethernet ports available to connect 10/100/1000 Mbps wired network devices to the internet. Connects to the broadband modem provided by your ISP (Internet Service Provider). Reserved for future use. The Power Adapter connects to this port.
What antenna can be adjusted to provide optimal signal coverage for your location?
3 The MeshPoint antenna can be adjusted to provide optimal signal coverage for your location.
Hardware Overview
The front of the AmpliFi Router features an adjustable, full-color touchscreen display.
Installation
The AmpliFi Router can be installed using one of the following methods:
App Features
The system dashboard provides an overview of the AmpliFi Wi-Fi system including network status, number of connected clients, and active download/upload speeds. Tap devices to display/edit settings.
Resetting to Factory Defaults
If the AmpliFi Router administration password is lost, factory default settings can be restored.
Limited Warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.
Compliance
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
What happens if mesh points disconnect?
If your mesh point (s) have disconnected themselves from your router, the pairing protocol might need to be realigned between the mesh points and the router. The troubleshooting steps are different for mesh points that came with the router in the AmpliFi HD kit (AFI-HD) for example and the mesh points that are sold separately (AFI-P-HD). Please find the troubleshooting steps for each type of mesh point below. This article applies to all our product lines (AmpliFi HD, Instant, Gamer and Alien lines).
How to reset AmpliFi router?
The router can be factory reset through the AmpliFi smartphone app settings or by inserting a paperclip into the factory reset pinhole located at the bottom of the router. Hold down for five seconds until the front screen of the AmpliFi router says "Rebooting...".
Can MeshPoints be paired with a router?
Warning If the MeshPoints are part of a kit system they cannot be paired with a router other than the one they came with in the kit.
