Does monkeymote work with Arris bgw210-700?
The unit is an ARRIS BGW210-700. My computer is running Foobar2000 music player, and i use MonkeyMote app on my iphone to remotely control this music player. I have been using the MonkeyMote app for about a year, and it has worked fine.
What is the bgw210-700 broadband gateway?
ARRIS BGW210-700 Broadband Gateway Introduction The BGW210-700 Broadband Gateway hardware platform can host different software. The Advanced Residential Gateway supports VoIP, IPv6, video delivery, security firewall, and extensive remote management features.
How do I contact Arris for technical support?
For technical support on ARRIS products you can contact us by phone or on the web. The Ask ARRIS web site gives you web access to service and support tools. You will need to register using your support contract ID and email address. Ask ARRIS is located at: Email addresses for ARRIS products will be provided with your account at Ask ARRIS.
How do I connect two phones to the bgw210-700?
For two phones, connect the phone cable to a splitter and then to the phones. Note: To prevent interference with cordless phones, ensure that the BGW210-700 Broadband Gateway is at least 5 feet (1.5 m) from any cordless phone base station.
How do I access my AT&T router remotely?
Try the following steps to access you AT&T router remotely.Connect your computer to the internet. ... Open your browser and type 192.168.1.254 into your address bar.You will then be directed to a login page.Once done, you will find your router's web interface and access the settings.
How do I access my AT&T BGW210 router?
Type 192.168. 15.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Arris BGW210-700 ATT is (blank).
What is ATT Remote Access?
AT&T Secure Remote Access allows administrators to grant access to specific applications by role or user without connecting to the network, helping to reduce risk of DDoS attacks or malware spread.
How can I remotely access my modem?
To access your modem remotely, you will enter https:// followed by the modem IP in the URL field of a browser.Connect a device, such as a computer or tablet, to the internet through WiFi or using an Ethernet cable connected to your modem.Open a web browser and type http://192.168.0.1 into the web address field.More items...
Is BGW210-700 a router or modem?
AT&T Arris BGW210-700 Broadband Gateway WiFi Modem Router.
What is AT&T passthrough?
Here is more information on how to configure IP passthrough. This configuration is used to connect third party equipment to the AT&T provided gateway. To turn off the Wi-Fi on the AT&T gateway, you will have to access the gateway with a browser. Navigate to the Wi-Fi section and turn Wi-Fi off.
Is remote access secure?
Remote access solutions could leave you vulnerable. If you don't have proper security solutions in place, remote connections could act as a gateway for cybercriminals to access your devices and data. Hackers could use remote desktop protocol (RDP) to remotely access Windows computers in particular.
Which is a more secure form of remote access over a network?
Virtual private network (VPN)Virtual private network (VPN) – The most common and well-known form of secure remote access, VPNs typically use the public Internet to connect to a private network resource through an encrypted tunnel.
What is an anira device?
Provides remote user access to corporate resources by combining the best of MPLS VPN services and Internet Based VPN services to create a single global VPN.
How do I access my Arris modem remotely?
To Enable Remote Access Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear. NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager. There is no risk in proceeding to the Web Manager.
How can I access my router remotely from anywhere?
3:147:55How to Access your Router from Outside Network - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want to access your router from outside the network then you will have to type your public IPMoreIf you want to access your router from outside the network then you will have to type your public IP address followed by the remote. Control port number which is 8080. But there are two problems here
How can I access my home network remotely?
When you're away from home, you can just point a browser to myhome.homefpt.net:8080 to access your router's Web interface and manage your home network remotely. This works with almost all home routers, except for those from Apple.
How do I reset my AT&T BGW210 router?
Reset gatewayPress and hold the gateway Reset button for at least 10 seconds. If you let go before 10 seconds, the gateway will reboot, but it won't reset.Wait until the gateway restarts and all the status lights are lit.See if the Broadband or Service status lights are solid green. If so, the reset worked.
How do I find my AT&T gateway?
Enter http://192.168.1.254 to access the gateway settings screen. Scroll to the Key things to do Using your Gateway and, select Wireless.
Is my ATT modem also a router?
AT&T's Wi-Fi Gateway is a modem-router combo device that not only brings the internet into your home, but also transmits the signal throughout your house for whole-home Wi-Fi. The wireless gateway allows you to connect up to four wired devices and any Wi-Fi enabled devices in your home.
How do I reset my AT&T modem remotely?
Sign in to Smart Home Manager and select Network.Scroll to and select Home Network Hardware.Select Wi-Fi Gateway and then Restart.Select Restart again.
What is the ARRIS BGW210-700?
This hardware install and operation guide consists of six product information chapters presented as follows:#N#1. ARRIS BGW210-700 Broad band Gateway Introduction (page 5) — Describes the ARRIS® document suite, purpose, and structure of this guide .#N#2. Preliminary Safety Instructions (page 7) — Provides power supply, telecommunication, and ventilation safety instructions.#N#3. Hardware Gateway Installation (page 9) — Provides the rear panel illustration, a cabling overview, and procedures to perform BGW210-700 Broadband Gateway connections for the power adapter, wired Ethernet, wireless devices, Internet, and VoIP telephones.#N#4. Basic Troubleshooting (page 16) — Provides simple suggestions for troubleshooting problems with the initial configuration of the gateway.#N#5. Technical Specifications (page 25) — Presents system and device specifications and important compliance and safety statements.#N#6. Important Safety Instructions (page 27) — Provides product, telecommunication, and electrical cautionary information, as well as conformance, radiation, and gateway disposable information
How far away is the BGW210-700?
Note: To prevent interference with cordless phones, ensure that the BGW210-700 Broadband Gateway is at least 5 feet (1.5 m) from any cordless phone base station. After the gateway recognizes the phones (Line 1 and Line 2), the Phone 1 & Phone 2 lights turn steady green and blink when the associated phone is in use.
How to connect a BGW210-700 to a power supply?
The power adapter supplies power to the BGW210-700 Broadband Gateway.#N#1. Connect the appropriate end of the power adapter cable to the BGW210-700 Broadband Gateway rear panel POWER port.#N#2. Connect the power plug end to the electrical outlet.#N#After the BGW210-700 Broadband Gateway is powered on, the power light blinks green momentarily and then remains steady green.#N#For all power light indications, see Status Indicator Lights (page 17) under Basic Troubleshooting.#N#Warning: Use only the power supply and cord that came with the BGW210-700 Broadband Gateway. Failure to use the authorized power supply and cord may cause electric shock, fire, bodily injury, and/or property damage. If the power supply or cord becomes damaged or needs to be replaced, to obtain an authorized replacement please contact AT&T customer service by phone (1.800.288.2020) or via website (www.att.com/support).
How many Ethernet ports does a BGW210-700 have?
The BGW210-700 Broadband Gateway has four wired Ethernet ports that can be used to connect computers or other devices. As shown in the illustration below, to connect a computer to the BGW210-700 Broadband Gateway: 1. Connect one end of the Ethernet cable to one of the Ethernet ports on the BGW210-700 Broadband Gateway.
What happens if you don't use the power cord on a BGW210-700?
Failure to use the authorized power supply and cord may cause electric shock, fire, bodily injury, and/or property damage.
What is the class of power supply for BGW210?
This product is intended to be supplied with a Listed Direct Plug-In AC/DC power adapter marked Class 2 LPS power supply rated @ 12V 3A DC for all BGW210-xxx models.
Is ARRIS a trademark?
ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises LLC. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks or the names of their products. ARRIS disclaims proprietary interest in the marks and names of others.
PleX is AMAZING! And non-techie folks just don't appreciate how great it is
I just recently set up a Plex server at home. I had a bunch of movies on hard drive but I'd have to sort through it all manually to watch anything, and only on my PC anyway.
Plex on iOS is getting gradually more broken as time goes on
subtitles on downloaded media don’t turn on. This has been like this for months for the downloaded media library. It’s fine for the normal online library.
Watch out for new Notifications
I updated the Plex app on my phone (Android) today, and I was looking through the the settings for something regarding the new Downloads feature when I noticed there are new Notification preferences that were not there last time I looked.
