To Disable Remote Access Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear.
Full Answer
How to restart Arris modem?
unplug the power cord from your modem, wait a minute and then reset it.Connect the modem directly to the AC outlet and wait 15 to 2 minutes to unplug it and restart it.Should you receive an attempt to locate the cable modem at another address than the same one or the same modem is relocated please contact customer service.
How to reset Arris router to factory settings?
- Please locate the recessed reset button that is located on the back of your Arris modem.
- Use an object with a small tip to press the reset button for 1 second. ...
- The lights on the modem should turn off, except for the power light, and then slowly be restored within a few minutes.
How to factory reset Arris SURFboard to default settings?
Reset using the router web interface. It's also possible to reset the device using the web interface. Log in to your Arris router or modem. Look for a section labeled Security or Utilities (this can vary depending on your router model). Choose the option to factory reset the device to default settings. Wait a few minutes for the reset to complete.
How to reboot router remotely?
- Press Windows key + R on the keyboard to open the Run dialog
- Type shutdown /i command and click the OK button.
- Click the Add button.
- Enter the computer name or IP address of the remote computer.
- Click the OK button.
- (Optional) Repeat steps No. ...
How do I disable remote access to my router?
To do this, open your router's web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it's disabled — it should be disabled by default on most routers, but it's good to check.
How do I access my Arris router remotely?
To Enable Remote Access Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear. NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager. There is no risk in proceeding to the Web Manager.
How do I manage my Arris SURFboard?
In order to use Remote Config Management, it is required to use the WAN IP address of the ARRIS Wi-Fi device.Tap the SURFboard icon. ... On the Login screen, enter admin in the Username field and password in the Password field. ... Tap the Login button. ... Tap the Menu icon on the top-left corner.More items...
How do I access my modem remotely?
To connect to your personal router remotely, go to your web browser on your phone. Type in your router's IP address. It's the same IP address you used when you were setting up the remote access. A log-in page will be displayed.
Can someone access my WIFI remotely?
Yes, it's absolutely possible for your home network to get hacked. There are a couple of ways hackers can gain access to your network. One common method is to guess the password. It sounds simple, but routers often come with a preset default password that the manufacturer uses for all devices.
How do I access my Arris surfboard modem settings?
Type 192.168. 100.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. Check the bottom of your router.
How do I change the settings on my Arris modem?
Configure the settings for your Arris modem in the control panel section. Click the "WAN Setup" tab to view the configuration settings for the modem. Here you can change the Dynamic Host Configuration Protocol (DHCP) settings that are in place for your modem's wireless network including the IP address and subnet mask.
What is the default Login for Arris router?
By default, the username is admin, and the password is password. For network security purposes, ARRIS recommends changing the router default admin user name and password after logging onto the SBR-AC1200P for the first time.
Why can't I log into my Arris router?
Enter the default Arris router password If this doesn't work, someone may have changed the router's login credentials. If this is the case, you simply need to reset your router to factory defaults. Just note that by resetting your Arris router, any changes you have made to the router will be completely cleared.
What is the default login for Arris router?
By default, the username is admin, and the password is password. For network security purposes, ARRIS recommends changing the router default admin user name and password after logging onto the SBR-AC1200P for the first time.
How do I reset my Arris router password?
0:232:07How To Reset Your WiFi Password with An Arris Modem - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst open a web browser for example google chrome. Next in the address bar enter this ip address toMoreFirst open a web browser for example google chrome. Next in the address bar enter this ip address to log in enter the default username and password as seen on the screen.
How do I reset my Arris router?
Most Arris routers can be reset using the Reset Button.Locate the Reset Button on your Arris modem or router (typically found on the back of the device). ... When you locate the button, press and hold it for at least 15 seconds. ... Wait for the reset to complete—this process can take a few minutes.
Why are the lights on my arris modem so helpful?
The lights on your Arris modem are an incredibly helpful diagnostic tool. They allow you to figure out exactly where the trouble with your Wi-Fi is coming from. If you’re struggling to understand why your Wi-Fi isn’t working, pay attention to these signals from your Arris modem:
How many lights are on an arris modem?
There are 4-6 lights on each Arris modem, and each one gives you information about the status of your internet connection. Using them to diagnose your internet connection issues makes troubleshooting much easier and gets you back online faster!
What does the power light on an arris modem tell you?
The Power light, as you may expect, tells you whether or not electricity is flowing through your Arris modem.
What does green light mean on arris modem?
The Online Light, when it’s green, means that your Arris modem is fully operational.
What does the light on my modem tell me?
This light tells you whether or not the modem is receiving a signal from the internet.
What to do if you have Wi-Fi trouble?
So, if you’re experiencing Wi-Fi trouble, make sure every cable is connected properly – not just at the modem end but at the other end (the wall, your computer, etc) as well!
Why does my modem light turn off?
The reason that particular light would flash or turn off is that your modem’s MAC address is unregistered or unrecognized.
How to connect to arris wifi?
Connect to your Wifi router. Turn on your wifi router and now plug the network cable between it and Arris at port 1. Now, connect your computer to your router wifi network (and not to Arris wifi).
What is the new IP address for arris?
Now we’ve changed the Arris LAN IP, we need to open again this web interface in our browser, but now at the new IP: http://192.168.1.1 (use the same credentials, user admin and password password ).
How to reset Arris TG862?
If you want to revert all configurations to the previous one (i.e, the one from the ISP), you can reset the Arris TG862 using a pen, pressing the reset button for 30 seconds.
What IP address does my router need?
Your wifi router must be configured with LAN IP 192.168.0.1.
What is the best modem for cable?
One type of popular and well established modems are Motorola Surfboard (Arris) Modems. These modems have been a popular choice for both cable providers and users who purchase their own.
What happens if signal is poor?
Poor signal levels result in - Signal levels that are not in the acceptable parameters listed above can cause loss of connection, slow speeds and connection issues, including failure of one of the steps needed for registration with the provider, packet loss or the need for packet retransmission.
What is a good clear signal?
Above 33dB would indicate a good clear signal.
What is an arris modem?
Arris is a company that manufactures and sells modems, among other telecommunications equipment and software. While it is a renowned business, the biggest user complaints lie within the Arris modems continuing to reset (and without warning). Why is this happening, and how can you fix it?
Why Does My ARRIS Modem Keep Resetting?
Modems are devices that help foster a connection between your electronics and your home’s WiFi. Without this device, you wouldn’t be able to check your email or connect with friends on social media using a wireless network.
How long is the warranty on an arris modem?
If your modem is under 2 years old and is acting up, you should consult your warranty to see if you might be covered. Arris offers a 2-Year limited warranty from the date of purchase. However, if you received the modem as a rental via your ISP, they may have a different policy.
What to do if modem is no longer under warranty?
If your modem is no longer under warranty, you can still contact Arris for help. However, you will have to pay the $39.99 fee for this service. The worst-case scenario is that your modem is irreparable. You can purchase a new one on Amazon for around $99.
Why is my arris modem so slow?
Your Arris modem is probably showcasing slow speeds due to high interference. The more devices on the same network at a time, the more the connection needs to be shared.
Why is my internet speed slower than normal?
If your device is far away from your modem , you may also be experiencing slower than normal internet speeds. A WiFi extender can help alleviate this.
How long does a modem last?
Unfortunately, the average life of a modem is only about 3 years before it starts having issues. The most common issue- especially with Arris modems- is that they keep resetting.
What is programmatic reset?
Programmatic reset refers to sending a reboot instruction to the modem without using the web interface or having to install Comcast’s own app. It allows users to automatically reset their modem when an issue is discovered, without the user having to discover and troubleshoot it themselves. And lastly, it’s my modem.
Does power cycling work remotely?
And as I mentioned, power cycling only works if you’re physically present with the device. Not exactly “remote!”
Can I reset my Comcast account online?
The online reset is great, but you need to log into My Account (or download Comcast’s own app) to do it. That will be a good solution when Comcast proactively monitors my connection speed. (I don’t see that happening any time soon.)
Does block sync prevent reset?
Once the modem completes block sync on our network (completes upstream/downstream ranging), it prevents the reset. It is possible to perform a reset through the admin panel before block sync is completed. The bootfile only provisions the correct class of service (e.g., speeds) through the CMTS and has nothing to do with the firmware's feature set.
Can a modem reset be done by powercycling?
The reset capability within the firmware of the modem nothing more than a soft reset that the My Account app can do. The same function can also be performed by powercycling the device itself.
