arris touchstone tg2472 remote access

How do I Find my Arris router password?

Method 4 Method 4 of 4: Finding Your Router's Admin Password

1. Check a default router password website. Unless you've changed your home router's admin password, it's likely still set to the manufacturer's default.
2. Find your router's IP address. It's usually something like 10.0.0.1 or 192.168.0.1. ...
3. Enter your router's IP address into your web browser's address bar. ...
4. Enter your router's default username and password. ...

What is default password for Arris router?

To do that:

• Open a browser window or tab.
• Kind ‘192.168.0.1’ within the handle bar with out quotes.
• Enter the login credentials. When you have not arrange a password, the default credentials are as follows: Username: admin Password: password
• Choose log in.

How to log in to an arris router?

Open a web browser on a device connected to the network to get started. Enter the IP Address "192.168.100.1" into the address bar. You should be using the same address bar where you normally type website addesses. After entering the numbers with the proper punctuation, press "Enter. " After entering the number, the Arris login page will display.

How do I Reset my Arris router password?

To change your router’s password:

• Enter your router’s IP address into your favorite web browser.
• Log in with the default username and password (both admin, usually).
• Go to settings.
• Select Change Router Password or a similar option.
• Enter the new password.
• Save the new settings.

Is Arris Touchstone TG2472 a router?

TG2472 | Touchstone® TG2472 Cable Voice Gateway It combines two FXS ports of carrier-grade VoIP, a 4-port gigabit router, MoCA 2.0 over coax, and a dual band 802.11ac wireless access point with battery back-up into a single integrated device.

How do I set up my Arris Touchstone TG2472?

For the ARRIS TG2472, you have to do the following steps for access:Put router into operation.Connect the device via Wi-Fi* or a network cable with the router.Open browser.Enter IP address in the address bar and then confirm with 'Enter' key.Enter username and password in the open user interface and confirm again.

How do I put my Arris modem into bridge mode?

Arris DG 2470 / 3270Open your preferred web browser (Chrome, Microsoft Edge, Firefox, or Safari)In the address bar, type: 192.168.0.1 [Then press the Enter Key]Enter Username*: admin.Enter Password*: password.Click Login.Under the LAN Setup section, locate the NAT setting and change the drop down selection to Bridged.More items...

How do I setup my Arris Touchstone modem?

0:524:36How to setup your ARRIS SURFboard Wi-Fi Cable Modem - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse your hand to align the threads. And turn clockwise repeatedly to tighten the connector. FinallyMoreUse your hand to align the threads. And turn clockwise repeatedly to tighten the connector. Finally connect the power cord to the power port and plug it into a wall outlet.

How do I log into my Arris router?

Arris Login StepsConnect To The Arris Network. To set up any router, you must stay connected to its network. ... Enter The Default Login Information. In the username and password fields, enter the printed values on the sticker at the side or bottom of your router.

How do I setup a guest network on my Arris router?

SBG10: Guest Wi-Fi Network SetupOn the Login page, enter admin in the User Name field.Enter password or a customized password in the Password field. ... Click the Apply button. ... On the System Basic Setup page, click the Wireless 2.4 GHz link on the top menu. ... On the left-hand menu, click the 2.4GHZ Guest SSID link.More items...

What does bridge mode do?

Bridge mode is the configuration that disables the NAT feature on the modem and allows a router to function as a DHCP server without an IP Address conflict.

Is bridge mode the same as access point?

The distinction is important: A wireless access point connects users to a network by creating a wireless signal they can use. A bridge, in contrast, connects separate networks —your preexisting wireless home network to all of the devices connected to the bridge.

What is bridge mode on a modem?

Configuring a High-Speed Internet modem in Bridge Mode allows your PC, separate router or other device to establish a connection to the Internet. The device usually connects directly behind the High-Speed Internet modem and is configured with the PPPoE (Point-to-Point Protocol over Ethernet) username and password.

Does Arris have an app?

The ARRIS HomeAssure™ app improves your visibility into your in-home Wi-Fi network, putting you in charge of your Wi-Fi experience!

Can I use modem without computer?

You actually don't need a laptop or computer to provide your entire household with WiFi. All you need is a smartphone or tablet to set up your WiFi router to enjoy internet access.

Why can't I log into my Arris router?

Enter the default Arris router password If this doesn't work, someone may have changed the router's login credentials. If this is the case, you simply need to reset your router to factory defaults. Just note that by resetting your Arris router, any changes you have made to the router will be completely cleared.

How do I log into Arris TG2472G?

Type 192.168. 0.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Arris TG2472G is admin.

How do I update my Arris modem firmware?

To do this:From the Setup page on the router interface, select Status.Choose Router Upgrade from the drop-down menu.Select Browse and navigate to the file you just downloaded.Select Upgrade and confirm.The file will be uploaded and installed. Do not switch off the router until the upload is complete.

What is Arris DG2470?

Arris DG2470 Product Details The Touchstone DG2470 is a DOCSIS 3.0 home gateway which supports 24 x 8 channel bonding which delivers up to 960Mbps of broadband data. It combines a 4-port gigabit router, MoCA 2.0 over coax, and a dual band 802.11ac wireless access point with both 2.4GHz and 5GHz bands.

Special offers and product promotions

Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today

Product Description

The Touchstone TG2472 is a DOCSIS3.0 home telephony gateway supporting 24 x 8 channel bonding for up to 960Mbps of broadband data. It combines two FXS ports of carrier-grade VoIP, a 4-port gigabit router, MoCA 2.0 over coax, and a dual band 802.11ac wireless access point with battery back-up into a single integrated device.

Top reviews from the United States

There was a problem filtering reviews right now. Please try again later.

PRODUCT OVERVIEW

Operators are wanting to push the limits on DOCSIS 3.0 performance and the user experience delivered to the customer. The TG2472G with its superior 802.11ac Dual Band Wireless radios, USB, and MoCA 2.0 interfaces can deliver this performance while also offering improvements in home coverage above that of other models.

Specifications

Battery Storage Temperature °C – -20 to 60 Note: Storage above 77ºF (25ºC) will significantly reduce life othe battery and is not recommended.

What is Touchstone TG2472?

The Touchstone TG2472 Telephony Gateway provides four Ethernet connections for use as the hub of your home/office Local Area Network (LAN). The TG2472 also provides 802.11a/b/g/n/ac wireless connectivity for enhanced mobility and versatility. In addition, the TG2472 provides for up to two separate lines of telephone service.

Is third party compatibility subject to change?

The capabilities, system requirements and/or compatibility with third -party products described herein are subject to change without notice.

Is ARRIS a trademark?

ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others.

Can you connect a telephone gateway to existing wiring?

Connecting the Telephony Gateway to existing telephone wiring should only be performed by a professional installer. Physical connections to the previous telephone provider must be removed and the wiring must be checked; there must not be any voltages. Cancelation of telephone service is not adequate. Failure to do so may result in loss of service and/or permanent damage to the Telephony Gateway.

Does ARRIS make warranties?

ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at any time.