Why choose Aruba 303h hospitality access point?
DATA SHEET ARUBA 303H HOSPITALITY ACCESS POINT High-performance 802.11ac Wave 2 (Wi-Fi 5) access point for hospitality and branch offices The multi-functional Wave 2 303H access point delivers best-in class Wi-Fi connectivity for hospitality and branch offices, enabling an always-on user experience with low Total Cost of Ownership (TCO).
How many antennas does the Aruba 303h have?
DATA SHEET ARUBA 303H HOSPITALITY ACCESS POINT 4 WI-FI ANTENNAS • Two integrated dual-band moderately directional antennas for 2x2 MIMO with maximum individual antenna gain of 4.3dBi in 2.4GHz and 6.2dBi in 5GHz.
What are the security requirements for the 303h series access point?
The 303H Series access point must be secured to an Aruba-approved wall or to a desk mount kit. This access point should be oriented vertically, with Ethernet ports facing downward to facilitate maximum antenna gain. Use the access point placement map gene rated by Aruba’s RF Plan software application to determine the proper
Where are the wired Ethernet ports located on the 303h series?
Alternatively, the wired Ethernet ports located on the bottom of the device allow users to connect to the device directly when linked by an Ethernet cable. The 303H Series access point can be attached to a standard single-gang wall box using the mount provided, or
What is Aruba remote Access Point?
Aruba Remote Access Points (RAPs) provide secure always-on network access to corporate enterprise resources from remote locations.
How do I setup my Aruba wireless access point?
Connect the power cable to the power supply.Connect the power cable to the Aruba AP and plug the power into power.Connect the provided network cable to the black E0/PT connection on the bottom of the Aruba AP. ... Connect the other end of the network cable into an open port on your wireless router.More items...•
How do I add an access point to my Aruba controller?
To add an Instant AP to the network:Navigate to the Configuration > Access Points page.Click + in the Access Points table.In the New Access Point window, enter the MAC. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address for the new Instant AP.Click OK.
What is a hospitality access point?
A hospitality access point is a small “all in one” unit that supports Wi-Fi 5/802.11ac high speed Wi-Fi along with a small built-in Ethernet switch with 3 usable Ethernet ports on it.
How do I find my Aruba access point IP address?
Viewing Access Point Details Tap any of the APs listed in the Inventory list. The Access Point Details page is displayed with details. View the AP details such as the AP name, IP address of the AP, MAC address, Serial number, AP type, radio, and the number of the clients connected on each radio channel.
Is Aruba Instant on a router?
An Aruba Instant On AP acts as a network router as well. In short, this means plugging in directly to the Internet right out of the box allows network setup to begin immediately. Aruba Instant On devices require no licenses, subscriptions, renewals, or prepaid contracts.
Does Aruba access point need a controller?
What is Aruba Instant? Aruba Instant is a wireless access point operating system and platform that does not require the purchase of hardware/virtual controllers for deployment.
How do I add an access point?
Simply connect the access point to one of the ports of your existing wired/wireless router then configure the access point's wireless settings.Open the access point's web-based setup page by entering the default IP Address “192.168. ... On the web-based setup page, click on Wireless.Enter the Network Name (SSID).More items...
How do you associate AP with a controller?
0:598:38Lightweight Access Point Registration with Wireless LAN Controller (WLC)YouTubeStart of suggested clipEnd of suggested clipProcess first the AP needs to get an IP. Address. Next the access point needs to find candidateMoreProcess first the AP needs to get an IP. Address. Next the access point needs to find candidate controllers to which it can register.
What is Aruba RAP device?
The multifunctional Aruba RAP-3 delivers secure 802.11n wireless and wired network access to corporate resources from branch and home offices. Centrally managed by Aruba Mobility Controllers, the RAP-3 extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center.
How do I setup a device in Aruba?
0:332:26Aruba: How to set up your remote access point - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst find your plastic desktop mount and snap it onto your wrap. So it can stand on its own like.MoreFirst find your plastic desktop mount and snap it onto your wrap. So it can stand on its own like. This next find an Ethernet port on your wrap labeled e0.
How do you set up rap?
Navigate to Configuration > AP Installation (under Wireless.) Select the required remote AP under the Provisioning tab and then click Provision. Select Yes for Remote AP and Certificate for Remote AP Authentication Method. Click Apply and Reboot to apply the configuration and reboot the AP as certificate RAP.
What is the default IP address of Aruba access point?
The default IP address of the controller is 172.16. 0.254. Connect a PC or workstation to any line port on the controller, then enter this IP address into a supported Web browser to launch the Setup Wizard. To run the Setup Wizard: 1.
How do I reset my Aruba access point?
To reset a n Instant AP, perform the following steps:Turn off the Instant AP.Press and hold the reset knob using a small and narrow object such as a paperclip.Turn on the Instant AP without releasing the reset knob. The power LED. ... Release the reset knob. The Instant AP reboots with the factory default settings.
How does a wireless access point work?
Access points work by connecting direct to your broadband router or network switch with a Ethernet or data cable. This provides the AP with the internet connection and bandwidth required. It then transmits and receives a wireless signal in either the 2.4Ghz or 5Ghz frequency range (WIFI).
How do I change my Aruba access point Wi-Fi password?
Changing PasswordNavigate to System > Admin.Under Local, provide a new password that you would like the admin users to use.Click OK.