Rear (RT-N12 HP) Label Description WPSPress this button for more than four seconds to establish a secure wireless connection with a WPS-supported wireless device. LAN1-LAN4 Connect RJ- Ethernet cables to these ports to establish LAN connection. WAN Connect an RJ- Ethernet cable to this port to establish WAN connection. Reset
Full Answer
How do I upgrade the firmware of my RT-N12 wireless router?
• Click Start> All Programs> ASUS Utility> RT-N12 Wireless Router> Device Discovery. The Firmware Restoration utility is not used to upgrade the firmware of a working ASUS Wireless Router. Normal firmware upgrades must be done through the web GUI.
Do rt-n1 series routers support the Asus DDNS service?
ASUS DDNS Service RT-N1 Series routers support the ASUS DDNS service. If you have registered for the ASUS DDNS service but need to exchange devices at the service center, inform the service center that you want to keep the original domain name and retain the DDNS service. Visit your local service center for more information.
How do I Reset my rt-n1 router to the factory settings?
• Press the Reset button at the rear panel of the wireless router for more than five seconds. • Refer to the section Restoring/Saving/Uploading settings of this user manual. The following are the factory default settings: ASUS DDNS Service RT-N1 Series routers support the ASUS DDNS service.
What do I do if my rt-n1 router is damaged or missing?
NOTE: • The RT-N1 Series wireless router includes the RT-N1 D1 and RT-N1 HP models. This manual discusses features for both models. • If any of the items is damaged or missing, contact ASUS for technical inquiries and support. Refer to the ASUS Support Hotline list at the back of this user manual.
Can I access my ASUS router remotely?
Make sure that your computer or mobile is connected to the router's network, as shown earlier. Then, open your favorite web browser, navigate to router.asus.com, and press Enter. This should load the “Sign In” window of your ASUS router. Enter the username and password of your specific router, and press Sign In.
How do I access ASUS RT-N12?
Type 192.168. 1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Asus RT-N12 D1 is admin.
Can I access my router settings remotely?
When you want to access your router from inside the network; all you have to do is type in the router's IP address in the web browser. Similarly, to access your router from outside, you need to type in your public IP address followed by remote control port no i.e. 8080.
How do I access my ASUS router control panel?
All you need to do is connect your computer system to the Asus router's network. Type router.asus.com or 192.168. 1.1 in your browser. Input the Asus router's username and password as admin in both the fields to get access to the Asus router configuration page.
How do I access my router from my phone?
You can also access the router's settings on your phone from a mobile web browser:Make sure your phone is connected to your router's wireless network.Identify your router's default gateway IP address. ... Find your router's user name and password. ... Open a mobile browser and enter the router's IP address in the URL bar.More items...•
How do I setup my Asus router as an access point?
Please follow the below steps:Please connect your AP router from its LAN port to the LAN port of router/modem.Open a web browser and navigate to the router setting page (http://router.asus.com).Click [Advanced Settings]Or go to Administration -> Operation Mode tab, select Access Point(AP) mode and click Save.More items...•
How do I access my router admin remotely?
To connect to your personal router remotely, go to your web browser on your phone. Type in your router's IP address. It's the same IP address you used when you were setting up the remote access. A log-in page will be displayed.
How can I remotely access my WiFi?
How To Get WIFI In Remote Areas – 6 Ways To Get Internet (Guide)Go for satellite internet.Tethering.Use a USB dongle.Use a MIFI device.Mobile wireless.DSL internet.
What is remote connection in ASUS router?
Remote Administration is a convenience feature that router vendors provide to facilitate managing your router remotely. Normally, you can access the administration features of the router (such as changing the WiFi password) only from computers that are in the home and connected to the network.
What is the ASUS router web address?
ASUS Router Login with IP Address via Browser Next, enter the default IP address, i.e., http://192.168.1.1/, to initiate ASUS router login. If this doesn't work, you can go to http://router.asus.com/ and select your model from the list of routers.
How do I find the IP address of my ASUS router?
Open the Asus Device Discovery utility and then connect your computer to the router via WiFi or an Ethernet cable. Here is an example of a wireless connection between router and computer. 8. After connecting the computer to the router, you can click the Search button to find the IP address of your wireless router/AP.
What is the default login for ASUS router?
Open your Internet browser, and input [http://192.168.1.1] into the address-bar then press [Enter]. Enter [admin] as the default user name and password, click [OK]. After login, press [Go] to start the setup.
How do I access my router settings without Internet?
3 AnswersConnect a wired ethernet cable from your computer to the router.Connect it to the LAN, the ports numbered 1,2,3,4. ... You may want to check if your network card is set to DHCP, Start -> Run -> ncpa.cpl -> right click NIC -> Properties -> Internet Protocol (TCP/IP) -> Properties.More items...•
Can I turn off my WiFi remotely?
Launch a web browser on the remote computer from which you want to disable wireless. Navigate to the IP address obtained in Step 2. Log in to the access point as administrator, then disable the wireless network.
How to setup RT N12?
With the RT-N12, setup is a breeze. Simply power and connect the router and open a browser on a Wi-Fi-enabled device like a notebook or pad. You will then be taken to a setup page with a prompt to enter the ID/password from your internet provider, and that’s it! Setting up your network is easier than ever.
What is RT N12?
The RT-N12 is a 300Mbps Wireless N Router with both wired and wireless network connections designed specifically for small business and home office networking use. With 2T2R MIMO Technology and two detachable 5dBi high gain antennas, the RT-N12 creates a an extended coverage area with advanced wireless performance, making it ideal for streaming HD video, placing VoIP calls and online gaming. With the ASUS unique Quick Internet Setup and Graphical User Interface, the RT-N12 is easy for anyone to install and manage, even for novices! The RT-N12 even allows you to set up 4 SSIDs, so, users can flexibly manage internet access and bandwidth allocation.
What browsers can I use for my Asus router?
Your ASUS Wireless Router uses a web-based user interface that allows you to configure the router using any web browser such as Internet Explorer, Mozilla Firefox, Apple Safari, or Google Chrome.
How long does it take to restore firmware on Asus router?
This utility uploads a firmware file to the wireless router. The process takes about three to four minutes.
What happens if my wireless router fails?
If the upgrade process fails, the wireless router automatically enters rescue mode and the power LED indicator on the front panel starts flashing slowly. To recover or restore the system, use the Firmware Restoration utility.
How to mount a router on concrete?
Use the mounting hooks to mount your router on concrete or wooden surfaces using two round head screws .
How to reset a wireless router?
Unplug the wireless router from its power source .. While holding down the Reset button at the back of the wireless router, plug the wireless router into a power source. Release the Reset button when the Power LED at the front panel begins to flash slowly, which indicates that the wireless router is in rescue mode.
How to connect a wireless router to a power outlet?
1. Insert your wireless router’s AC adapter to the DC-In port and plug it to a power outlet. Using the bundled network cable, connect your modem to your wireless router’s WAN port. . Insert your modem’s AC adapter to the DC-In port and plug it to a power outlet. . Install an IEEE 0.11b/g/n WLAN adapter on your computer.
Does a wireless router have a crossover cable?
NOTE: Your wireless router supports both a straight-through or crossover cable when setting up a wired connection.
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
From the manufacturer
The RT-N12 D1 Wireless-N300 router delivers reliable and fast speeds on both wired and wireless network connections for your home or office environment.
Product Description
The RT-N12 D1 Wireless-N300 router delivers reliable and fast speeds on both wired and wireless network connections for your home or office environment.
