The AXIS 210 connects directly to an IP network. With a built-in Web server, the AXIS 210 enables remote monitoring over a local area network or the Internet using a standard Web browser. The AXIS 210 is an ideal choice for securing offices, shops and other facilities.
Full Answer
What is the Axis 210a network camera?
The AXIS 210A Network Camera is a professional network camera for indoor monitoring over IP networks. The network camera is an ideal choice for securing indoor environments at offices, shops, schools and prisons, where the audio facilitates identification of suspicious behavior.
How do I access the Axis 210/211?
AXIS 210/211 - Accessing the Camera 9 Accessing the Camera Follow the instructions in the AXIS 210/211 Installation Guide to install your camera. The AXIS 211 can be accessed with most standard operating systems and browsers. The recommended browser is Internet Explorer for Windows, and Mozilla with other operating systems.
What happens if my axis 210/211 camera fails to upgrade?
•Your dealer reserves the right to charge for any repair attributable to faulty upgrading by the user. AXIS 210/211 - Troubleshooting 51 Emergency Recovery Procedure If power or the network connection to the camera is lost during the upgrade, the process will fail and the unit will become unresponsive .
How do I access my axis camera from the Internet?
To access your site from a remote location open up AXIS Camera Companion 2.0 and log in with the same MyAxis account as used on the local site. Select the remote site, type in the site password and press Enter. You should now be connected to the site. your cameras and router up manually.
How do I access axis NVR?
0:201:26AXIS Camera Station Secure remote access - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd selects access secure remote access insert your my access account and your password. Click applyMoreAnd selects access secure remote access insert your my access account and your password. Click apply you can then enable secure remote access once secure remote access has been enabled on the server.
How do I connect to my axis camera IP?
Configuring an Axis CameraConnect the camera. Connect the Axis camera to the computer using an Ethernet cable. ... Configure computer IP address. Set your computer's IP address to 192.168. ... Launch the Setup Axis Camera Tool. ... Setup the Camera. ... Manual Camera Configuration. ... Setup Page. ... Configure Users. ... Configure Image Settings.More items...•
What is the default IP for AXIS camera?
192.168.0.90The default IP address for the Axis cameras and video encoders is 192.168. 0.90. More information can be looked up here.
What is AXIS camera default password?
root/passAxis: Traditionally root/pass, new Axis cameras require password creation during first login (note that root/pass may be used for ONVIF access, but logging into the camera requires root password creation) Basler: admin/admin.
Is Axis Camera Station free?
Axis Camera Station One is a FREE software solution for the simultaneous viewing and recording of high-quality H. 264, MPEG-4 and Motion JPEG video from a single surveillance camera.
How do I enable Onvif on my axis camera?
If you are unable to find ONVIF user settings, please check this setting to ensure that ONVIF/Web Service is enabled.Navigate to System Options > Support > System Overview.Click ONVIF/Web service.Enable ONVIF/Web service by checking the box next to Enable Web Service.Press the Save button.
How do I stream with RTSP?
Step 1: Download and install VLC Player from http://www.videolan.org/vlc/. Step 2: Open VLC player and select“Open Network Stream”from the Media menu. Step 3: Type the network URL in the dialog box below, and then click Play to play the video with RTSP stream.
What port does Axis companion use?
For AXIS Companion 3 and AXIS Camera Station: The network needs to allow outbound traffic on ports 80 and 443 for Secure Remote Access to work.
How do I reset my axis camera remotely?
Remote reboot Axis IP cameraIn Windows open the Command Prompt.At the command prompt type in (without quotes) “FTP
Is Axis companion free?
The Axis Companion application is free, easy to use and makes CCTV simple. With no need for network or router configuration, it's never been easier to get your CCTV system up and running – all from your mobile device, no PC needed.
What is IP utility?
IP Utility is a free, Windows-based application tool with friendly user interface. It helps you locate available devices including cameras, video encoders, and standalone NVRs in the network by showing its IP address.
How do I find my NVR IP address?
0:152:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
How do I use NVR?
Here is how to proceed:Take an Ethernet cable to connect the LAN port on the external PoE switch and the router. Then connect the router with the non-PoE NVR.Use Ethernet cables to connect all IP cameras to the PoE switch RJ45 ports. ... Use an HDMI cable or VGA cable to connect the monitor and the NVR.
How do I enable ONVIF axis?
If you are unable to find ONVIF user settings, please check this setting to ensure that ONVIF/Web Service is enabled.Navigate to System Options > Support > System Overview.Click ONVIF/Web service.Enable ONVIF/Web service by checking the box next to Enable Web Service.Press the Save button.
Why NVR Cannot detect IP camera?
If you aren't getting a video feed from an ip camera, the first step you need to take is to bench test your camera. Take the camera down and connect directly to the NVR or PoE switch with a short pre-made Cat5 cable. 90% of the time a camera that disconnects/does not power, indicates a problem with the cable.
Axis solution to remote access
Axis Secure Remote Access is a technology that makes it possible for a smartphone or PC client to access Axis network cameras when the client and the cameras are located on different local networks. Connecting to remote cameras can be a challenge, especially when the cameras are located behind routers or firewalls.
Easy to setup
Axis Secure Remote Access significantly simplifies the installation of remote access to surveillance systems. Once enabled it is automatically configured and removes the need of manual port-forwarding and router configuration.
How it works
Using external mediator servers that are hosted or controlled by Axis, a client and a camera can find each other and establish a secure peer-to-peer connection. As a fallback when direct communication cannot be established the communication is relayed through the mediator servers.
Secure communication
Secure communication is in the core of Axis Secure Remote Access. The technology uses multiple levels of authentication to establish an encrypted communication between a client and the cameras in the surveillance system.
Availability
Axis Secure Remote Access is supported by multiple mediator servers. The redundant environment also secures the availability of the system.
Superior video quality for professional indoor applications
The AXIS 210A Network Camera is a professional network camera for indoor monitoring over IP networks. The network camera is an ideal choice for securing indoor environments at offices, shops, schools and prisons, where the audio facilitates identification of suspicious behavior.
Power over Ethernet
Built-in Power over Ethernet allows the camera to receive both data and power over a single Ethernet cable. This makes the installation easier and cheaper, and means that the camera can operate even when there is a power failure.
Integrated audio support
With a built-in microphone and the ability to connect to external speakers, the AXIS 210A enables remote users to not only view, but also listen in on an area and communicate orders or requests to visitors or intruders.
System overview
Cabling requirements and installation costs are reduced by the built-in support for Power over Ethernet and audio, enabling power to the cameras and two-way audio for the AXIS 210A to be delivered over the network.
How to change IP address on Axis 210?
2. Click the button Assign new IP address using serial numberand enter the serial number and IP address for the AXIS 210/210A/211/211A. The serial number is located on the product label. 3. Click the Assignbutton and follow the instructions. 4. Click the Home Pagebutton to access the camera’s web pages. 5. See page 10 for instructions on how to set the password.
How to check if Axis 210 is updated?
Visit www.axis.com/techsup to check if ther e is updated firmware available for your AXIS 210/210A/211/211A. To see the currently installed firmware version, see the Basic Configuration web page in the product’s Setup tools.
How to change the language on Axis camera?
After you have installed the Network Camera, you can download and install a language module to change the camera’s web interface to a language other than English: 1. Go to Setup> Language. 2. Download the desired language from www.axis.com/techsup/ and save it temporarily to your computer. 3. Click the Browsebutton and locate the language file. 4. Click Upload Language. The language you uploaded will appear under Select Language. 5. Select the language you want to use with your Axis camera, and click Save.
How to focus a 210?
To focus the AXIS 210/210A, unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten the focus puller. To focus the AXIS 211/211A follow the instructions below. 1. From the Basic Configura- tionpage in the setup tools, open the Focus adjustmentpage. 2. Set the DC-Iris to Disabled
What is the audio channel for a mono microphone?
Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
What is Axis IP Utility?
AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually assign a static IP address. Note that the computer running AXIS IP Utility must be on the same network segment (physical subnet) as the AXIS 210/210A/211/211A.
Can you disable the DC iris when focusing?
Note: The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set with this method it will then be maintained in any light conditions.
What is the Axis 211?
The AXIS 211 features a varifocal DC-Iris, which automatically regulates the amount of light entering the camera. Tele/wide and focus are adjusted manually with the aid of the pullers mounted on the lens.
How long does an Axis 210/211 battery last?
Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear when the battery needs replacing. The battery should not be replaced unless required!
What to do if AXIS 211 password is lost?
If the password is lost, the AXIS 211 must be reset to the factory default settings. See page 42. 5. If required, click
How to prevent unauthorized clients from including video stream from camera?
To prevent unauthorized clients from including the video stream from the cameras into external Web pages, check the Referrals checkbox and enter the IP address or Host name of the computer that hosts the Web pages with the included video stream. Several IP addresses/host names can be defined and are separated by semicolons (;). This option is only applicable to Motion JPEG video streams.
What is an event type in a camera?
The event type is the set of parameters (or conditions) that specifies how and when which actions will be performed. A common event type is when the camera uploads images when an alarm occurs. Many event types use an Event Server, to e.g. upload images to.
What is Axis Media Control?
The AXIS Media Control (AMC) is installed automatically the first time the camera is accessed from a browser . The AMC control panel can be opened by right-clicking on the video image in the Live View web page. The AMC control panel can be used to configure various network, video settings such as:
Can a PoE camera be powered from a network?
Supporting PoE network transformers conforming to IEEE 802.3af, the camera can be powered directly from the network cabling.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Have a question?
There was a problem completing your request. Please try your search again later.
Product description
Feature-rich network camera with CCD sensor for superior image quality. Up to VGA 640x480 resolution at full 30 fps frame rate and support for Video Motion Detection, I/O and advanced event handling. Includes fixed iris lens for indoor use, adjustable sta
