How many remote sessions are supported by the f1dp108g/f1dp116 KVM?
Only one (1) remote session is supported by the F1DP108G and F1DP116 KVM. If you use remote access from a second machine, you will be prompted whether you want to Take Over the running remote session, run a View Only session, or Cancel.
Will the wireless remote work with the f1dg102w?
The wireless remote, F1DG003-RMT for the Flip is available as a spare part, and will work with the F1DG102W only. IMPORTANT: There are Channel 1 and Channel 2 versions of the KVM and the switch. Using the wrong remote will not work. Therefore, when requesting a replacement remote, always specify the required channel.
How do I use the f1dn104k and f1d086u?
This is to properly receive Absolute Mouse signals between the computers and the F1DN104K. Then, use the F1D086U to only extend the video to the remote location for each computer using the KM.
Does the Belkin SMB (Cat 5) KVM range support DDC?
The Belkin SMB (Cat 5) KVM Range supports DDC, offering full support for the DDC-2 function. The DDC communication is enabled via an OSD command (F10) after which the graphics card and monitor settings will be synchronized. 10. What are the minimum (Closed) and maximum (Open) dimensions of the Rack Console?
What is the SIM for F1D9232G?
The Server Interface Modules (SIM) of the F1DP216G and F1D9232G are PS/2, USB, and Sun servers. Below are the servers with its corresponding model numbers:
What is dual head KVM?
The Dual Head KVM allows you to project your computer's display across two (2) monitors. These monitors are connected to the console side of the KVM, allowing an extended desktop view for each computer/server connected to the KVM. As you switch to each target, dual monitor support is provided.
How to find channel number on KVM remote?
IMPORTANT: There are Channel 1 and Channel 2 versions of the KVM and the switch. Using the wrong remote will not work. Therefore, when requesting a replacement remote, always specify the required channel. You can find the channel number on the remote itself, on a sticker under the battery lid. The remote uses a 3 V Coin Cell Battery. For assistance, call 1-800-223-5546 and press options 4, 1, and 2.
What is a USB B port?
The USB ports on the PRO2 are USB B ports. A USB B to USB A cable is required to feed the keyboard and mouse signals between the KVM and the connected computer (s).
What type of cable does the Pro 3 have?
The flash cables of the Pro 3 and the SMB series KVM have the same pin-out. Of the DB9-F to RJ11 cable, only three (3) pins are wired through:
Does F1DG102UTT work on Windows 10?
No, but for US customers, F1DG102Utt will be offered to support customers who are using Windows 7, Windows 8, Windows 8.1, and Mac OS X 10.x.
Does Belkin SMB support DDC?
Yes. The Belkin SMB (Cat 5) KVM Range supports DDC, offering full support for the DDC-2 function. The DDC communication is enabled via an OSD command (F10) after which the graphics card and monitor settings will be synchronized.
