Accessing the Belkin router from a remote location. Step 1: On a remote computer, open a web browser. Enter “https://X.X.X.X:8080” in the Address bar then press [Enter]. NOTE: The Xs represent the router's internet IP address and 8080 represents the port you have set up for remote access.
Full Answer
How to configure Belkin router as an access point?
Using an Ethernet cable, wire your Secondary Router / access point to your Main Router through the LAN ports of both devices. Connect your wireless devices to your new wireless connection. You should have now successfully configured your Belkin router as an access point.
What is the Belkin DC service?
The DC Service is a remote support tool that allows consumer technical support of Belkin International, Inc. and its subsidiaries, including, without limitation, Linksys LLC (collectively, "Belkin") agents to view and control your computer remotely to perform ordinary technical support procedures.
How do I change the IP address of my Belkin router?
Enter a unique IP Address that is not in use. NOTE: The IP Address of your Belkin router should be within the same range of the main router. By default, the IP address is set to 192.168.2.254 and the Subnet mask is 255.255.255.0. Click Apply Changes.
What can Belkin consumer technical support do for You?
You understand that once the DC client software is installed and support session initiated, a Belkin consumer technical support agent will take control of your computer and will be able to view, transfer and modify files and applications on your computer and perform other diagnostic and support tasks as needed.
How do I remotely access my Belkin router?
On the dashboard homepage, click Advanced Settings.Under the Utilities section, click System Settings.In the Remote Management section, click the On radio button. You can allow any IP address or a specific IP address to remotely manage the router. ... Click. to apply the changes.
How do I access my Belkin dashboard?
Accessing the router's web-based setup pageLaunch a web browser.Enter "https://router" or the router's default IP address, 192.168.You will be asked to log in using the router's admin password. If you have not set a custom password, just leave the Password field blank then click Submit.
Can Wemo be controlled remotely?
Remote Access is one of the useful features on your Wemo App which allows you to control your Wemo® devices even though you're away from home using your mobile device (smartphone or tablet).
How do I set up remote management?
Configure Router Remote Management SettingsLog in to your router's admin console. ... Click TOOLS tab, then go to the ADMINISTRATION section.Uncheck Enable Remote Management.Remove the Remote Admin Port from the textbox.Click Save Settings.Put a check beside Enable Remote Management.More items...•
How do I access my router dashboard?
Log in using a web browser Now that you have the router's IP address, open any web browser and type (or paste) the IP address into the address bar. Your router's login panel will then load within the browser window. If this is your first time, you'll need the router's default login credentials.
How do I get to my router login page?
You log into your router's firmware through a browser. At the address field, type the IP address of your router. Most routers use an address of 192.168. 1.1, but that's not always the case, so you may first want to confirm the address of your router.
Is Wemo discontinued?
On June 30th 2020, Belkin officially discontinued the Wemo® NetCam line of products as well as all associated video services.
Can Wemo work without Internet?
Can I use a Wemo Account without an active internet connection? No. A Wemo Account requires an active internet connection to function. As soon as your Wemo devices are linked with a Wemo Account, you will only be able to control them on a network with an active internet connection.
How do I connect my Wemo remote?
Once you download the Wemo apps and you Wemo devices ready (LED Indicator flashing blue and orange), you can connect it to Wemo SSID, open the Wemo apps and follow the setup instruction. Once the setup is completed, you may be able to control you Wemo devices using your mobile apps.
How do I enable remote access?
Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.
How do I stop someone from accessing my computer remotely?
Windows 10 InstructionsClick the Windows Start button and type "Allow Remote Access to your computer". ... Make sure "Allow Remote Assistance connections to this computer" is unchecked.Select "Don't allow remove connections to this computer" under the Remote Desktop section and then click OK.
What is remote management username and password?
By default, remote management of a Lifesize video system over HTTP is enabled at Preferences > Security > Enable Remote Management Over HTTP. Log in with administrator credentials to an SSH session and enter commands to manage your Lifesize system remotely. The default username and password are admin.
How do I change my Belkin router settings?
General Belkin Router ConfigurationVisit the router's IP address (http://192.168.2.1) in a new browser window. ... Click on DNS under Internet WAN.Enter the router's password and click Submit.Uncheck Automatic from ISP and type in OpenDNS addresses in DNS Address and Secondary DNS Address. ... Click Apply Changes.
How do I change my Wi-Fi settings?
Android 11 (stock) Step 1: Swipe a finger down from the top to expand the Notification Shade and tap the “cog” icon to open the Settings panel. Step 2: Tap on Network & internet. Step 3: Tap on Wi-Fi. Step 4: Tap on the “cog” icon displayed next to your network's name.
How do I open my broadband settings?
Open a web browser and type http://192.168.0.1 into the web address field. 3. Log in to the modem's settings interface (Modem GUI) using your Admin Username and Admin Password. Note that these are different from your wireless network name (SSID) and WiFi password (security key).
What is the Belkin router IP address?
192.168.2.1NOTE: The default IP address of a Belkin router is 192.168. 2.1. You need to check the IP address range and Default Gateway to assign it to a computer when assigning a static IP address.
What is remote management on Belkin router?
The remote management feature of your Belkin router allows you to make changes to the router's settings from anywhere on the internet. This article will show you how to configure remote management using the Belkin dashboard.
How to remotely manage a router?
Under the Utilities section, click System Settings. In the Remote Management section, click the On radio button. You can allow any IP address or a specific IP address to remotely manage the router.
Does Belkin have a liability for failure to back up?
It is your responsibility to back up your system, including without limitation, any material, information or data that you may use or possess in connection with the Product or Software, and Belkin shall have no liability for your failure to back up your system or any material, information or data.
Is Belkin obligated to provide maintenance?
Belkin is not obligated to provide any maintenance or support for the Open Source Software or any Product Software that has been modified by you pursuant to an Open Source Software license. “Open Source Software” means any software or software component or technology that is subject to an open source license.
Does Belkin offer energy savings?
Belkin does not guarantee or promise any specific level of energy savings or other monetary benefit from the use of the Products or Software or any other feature. Actual energy savings and any associated monetary benefits vary based on factors beyond Belkin’s control or knowledge.
What is a Belkin license agreement?
This End-User License Agreement (this “Agreement”) is a legal document that contains the terms and conditions under which limited use of certain Software (as defined below) that operates with the Product is licensed to you.
What is the IP address of Belkin router?
NOTE: The IP Address of your Belkin router should be within the same range of the main router. By default, the IP address is set to 192.168.2.254 and the Subnet mask is 255.255.255.0.
How to connect to a router with a Mac?
If you're using a Mac® computer, click here. Step 2: Go to Wireless > Channel and SSID and configure your AP's wireless network name (SSID).
How to configure SSID on AP?
Go to Wireless > Channel and SSID and configure your AP's wireless network name (SSID).
How to use a router as an access point?
Use this option when your router does not have the Use as Access Point option. Step 1: Open a web browser to access the router's web-based setup page. For instructions on how to access the router's web-based setup page using a Windows® computer, click here. If you're using a Mac® computer, click here. Step 2:
How to wire a secondary router to a main router?
Using an Ethernet cable, wire your Secondary Router / access point to your Main Router through the LAN ports of both devices.
What port does a router need to be plugged into?
All Ethernet cables being used need to be plugged into ports 1-4.
How to connect Belkin router to computer?
NOTE: If your router is using the Belkin Dashboard, click here. Step 1: Connect an ethernet cable from one of your router's LAN ports to your computer. NOTE: The back of your router may look different than the one shown above. For more examples, click here. Step 2:
What is guest access on Belkin router?
Guest Access is a feature on your Belkin router that allows your guests to connect to your Wi-Fi without having access to your shared files, printer and other devices in your network. Follow the steps below to know how to configure the Guest Access of your Belkin router using the web-based setup page.
Is Belkin obligated to provide maintenance?
Belkin is not obligated to provide any maintenance or support for the Open Source Software or any Product Software that has been modified by you pursuant to an Open Source Software license. “Open Source Software” means any software or software component or technology that is subject to an open source license.
Does Belkin have a liability for failure to back up?
It is your responsibility to back up your system, including without limitation, any material, information or data that you may use or possess in connection with the Product or Software, and Belkin shall have no liability for your failure to back up your system or any material, information or data.
What is the default IP address for Belkin routers?
In the Address bar, enter either http://router or 192.168.2.1 (this is the default IP address for Belkin routers).
How to connect access point to router?
Connect your access point to the main router using an Ethernet cable between the LAN ports on each device.
How to log into router if you have set one up?
Log into the router using your admin password, if you have set one up. Otherwise you should be able to leave it empty.
How to disable DHCP?
Disabling the DHCP Server 1 Open your web browser. 2 Type http://router or 192.168.2.1 into the browser’s Address bar 3 Log into the router using your admin password, if you have set one up. Otherwise you should be able to leave it empty. 4 Under the ‘ Wireless ’ section, click on ‘ Channel and SSID ’. 5 Enter a name for your new wireless network that is different from the one provided by the main router. 6 Under the ‘ LAN Setup ’ section, click on ‘ LAN Settings ’. 7 Enter an IP address for the access point that doesn’t conflict with any other devices on the network. The defaults for the IP and Subnet Mask are 192.168.2.254 and 255.255.255.0 respectively. You can leave these as is if in any doubt, unless your primary wireless network has a large number of devices (over 250) connected to it. If you assign an IP address yourself, ensure it is within the range of the main router ( 192.168.2.2-254 ). 8 Next to the ‘ DHCP server ’ option, click on ‘ Off ’. 9 Click on ‘ Apply changes ’. 10 Connect your new access point to the main router via an Ethernet cable connection between the LAN ports of both routers. 11 Connect a wireless device to the new network you have set up to test if it works.
