How do I access the Bell Home Hub 2000?
The procedure to access the Home Hub 2000, 3000 or 4000 is the same as for any other Bell modem. Accessing your Bell modem can help manage your Bell Internet experience. Wi-Fi management: You can set up your primary and guest Wi-Fi networks. The guest network only provides access to the Internet.
How do I create access controls on my Home Hub 2000 modem?
Create access controls on my Home Hub 2000 modem To access your modem settings, open a web browser, type bell.ca/homehub (or 192.168.2.1) in the address bar and then press Enter. Click on Access control. Enter the administrator password.
How do I block devices on the Bell Home Hub?
Open your web browser and visit bell.ca/homehub (or 192.168.2.1). From the home screen, click on Access control. Click on the pencil next to Always block. Select the devices you want to block. Click the Apply button. Click the Save button.
Why should I use the Bell Wi-Fi app instead of Home Hub?
To manage many of the features related to their Wi-Fi and devices on their home network, Home Hub 2000, 3000 and 4000 users should turn to the Bell Wi-Fi app instead. With the Bell Wi-Fi app, you can:
How do I access my bell router remotely?
Connection HubOpen a web browser.Enter the following in the address bar: When connected to the Internet, enter “ bell.ca/mymodem ”. ... When prompted, enter the Connection Hub username (the default is admin).Enter the Connection Hub password (the default is admin).Click OK.Your Connection Hub status page will appear.
How do I access bell Hub 2000?
To access your modem settings, open a web browser, type bell.ca/homehub (or 192.168. 2.1) in the address bar and then press Enter. Click on Access control.
How do I access my Bell Home Hub settings?
To access the settings for your primary Wi-Fi network:Open your web browser and visit bell.ca/mymodem or 192.168. 2.1.Enter your administrator password. Unless you have changed it, the default password is “admin”.Click Log in.Click on the Wi-Fi settings button.
What is Access control on bell router?
Access control only blocks Internet connections; it will not prevent devices from accessing other devices on the local network (e.g. , network printers, local file sharing between devices). For a Home Hub 2000 modem and above, manage Access control with the Bell Wi-Fi app.
What is the difference between Bell Home Hub 2000 and 3000?
Home Hub 3000 It's 3 times more powerful than the previous Home Hub 2000, and offers an easy-to-use web interface to manage Wi-Fi access and settings, and battery back-up that enables customers to use Fibe Internet during a power outage for up to 4 hours.
What is the administrator password for Bell?
Bell Router Login Guide The default username for your Bell router is admin. The default password is admin.
How do you I access my router settings?
Tap on the network name. Look for a 'gateway', 'router' or other entry in the list....Find router IP address on Android or iOSTap on Wi-Fi.Make sure your phone is connected to your router's Wi-Fi network.Tap the 'i' to the right of the network name.Your router's IP address is shown next to 'Router'
How do I connect to my hub?
Click the Network icon on the taskbar - it looks like signal bars. 2. Select your hub from the list of networks. Click 'Connect....Go to Settings – Wi-Fi.Turn on wi-fi.Select your hub from the list of networks.Enter your password and tap 'Connect. 'Wait for your device to connect.
How do you find the IP address of a router?
Find Your Router IP Address on AndroidGo to Settings.Tap Wi-Fi Settings.Tap and hold on your connected network and select Manage Network Settings.Check the box next to Show Advanced Options.Select Static under IP Settings.Your router IP address is listed under the Gateway section.
How do I control access to my Wi-Fi?
To set up access control:Launch a web browser from a computer or mobile device that is connected to your router's network.Enter the router user name and password. ... Select ADVANCED > Security > Access Control.Select the Turn on Access Control check box.More items...
How do you block someone from your Wi-Fi?
Using Third-party ApplicationsLaunch a browser and enter the router IP address.Log in with the credentials.Click on Wireless or Advanced Menu, then Security.Click on MAC Filter.Add the MAC address you want to block access for in the filter list.Select Reject for MAC filter mode.Now click Apply.
How do I unblock access control on my router?
One quick and painless method that will most likely resolve the “This device is blocked by access control in the router” issue is to simply reset the router to its factory settings. After waiting a few minutes and logging back in, you should find that none of your connected devices are being blocked.
How do I connect to my hub?
Click the Network icon on the taskbar - it looks like signal bars. 2. Select your hub from the list of networks. Click 'Connect....Go to Settings – Wi-Fi.Turn on wi-fi.Select your hub from the list of networks.Enter your password and tap 'Connect. 'Wait for your device to connect.
How do I reset my 2000 home hub?
Home Hub 2000Press and hold the Reset button on the side of the modem for at least 30 seconds.The Power light will flash red 5 times to indicate the process has started.Open a web browser and follow the online instructions.
How do I change the password on my Bell modem 2000?
Bell Hub 2000Open a web browser.Type 192.168. ... Click on the Modem settings button.If prompted, enter the administrator password. ... In the Administrator settings section, click the Change button.Type the current admin password in the Current password field.Type a new password in the New password field.More items...
What is the IP address of the Bell Hub 2000 router?
You misread my description... The Bell Hub 2000 router has the address of 192.168.2.1. Because my Asus router is behind the Bell router it needs an address on the Bell network... so it needs an address within the Bell router's IP address range... hence 192.168.2.12. The Asus however runs it's own network range starting with it's own address of 10.0.2.1 and assigns addresses (DHCP) to devices on that network in the set range 10.0.2.2 - 10.0.2.254.
What is the lease table on the Bell Hub 2000?
The Lease Table on the Bell Hub 2000 shows the Asus router address as the only leased one.
Does Bell have a POE injector?
Bell provided a POE injector and modem/router ( Bell Hub 2000). I already had my own router (Asus RT-AC3100) and I wanted to continue using it as the main router. So, I set up the Bell Hub 2000 as follows:
Does Asus router have DHCP?
Second, I think another problem may be that DHCP is enabled on your Asus Router. A simple network can only have one instance of DHCP running, In your configuration it looks like DHCP is enabled on the Bell & the ASUS devices, assuming this is correct you need to disable DHCP on the ASUS and let your Bell device handle it.
How to reset a modem to DSL?
Connect the modem to DSL connection and via Ehternet to the computer. Perform a factory reset by holding the reset button on the side of the modem down for 30 seconds. Wait for the Power light to flash 5 times and release the reset button. Gateway and configuration server are 192.168.2.1.
Can you recover your password on a Bell modem?
3. After any successful login, the modem configuration server may ask if you want to use password recovery. Choose "No" because the Bell password recovery would only work for a Bell DSL customer.
Does a modem connect to a VDSL?
The modem will connect to ADSL or VDSL. The modem is not configured to authenticate for an NCF Internet connection. Wi-Fi is enabled with a default configuration that must be changed. WPS is enabled. 2. Enter [ 192.168.2.1] into the address bar of your browser.
What is access control on home hub?
The Access control feature of your Home Hub lets 1000 you set the time and day a particular device can access the Internet. It blocks all Internet features, including email, social messaging or Skype. There are two ways you can control access to the Internet: Create a schedule for specific devices.
How to block internet access on Bell?
To block Internet access: Open your web browser and visit bell.ca/homehub (or 192.168.2.1). From the home screen, click on Access control. Click on the pencil next to Always block. Select the devices you want to block. Click the Apply button. Click the Save button.
What is Bell Aliant warranty?
Bell Canada (including Bell Aliant, a division of Bell Canada) ( “Bell”) warrants to you as the original purchaser ( “Purchaser” or “you”) the battery purchased for the Fibre Equipment ( “Original Battery”) for a period of 12 months from the date of purchase of the Original Battery from Bell ( “Warranty Period”) when used in the Fibre Equipment ( “Warranty” ). “Fibre Equipment” means the Home Hub 3000 modem or UPS (uninterruptible power supply), as applicable, provided by Bell in connection with certain of your Bell services. If the Original Battery fails due to a defect during the Warranty Period, Bell will replace the Original Battery with a new or refurbished battery ( “Replacement Battery” ). Any warranty coverage that remains during the Warranty Period on the Original Battery (when replaced with a Replacement Battery under this Warranty) will apply to the Replacement Battery. No Replacement Battery has any new or separate warranty coverage. Bell reserves the right to limit the number of Replacement Batteries provided to Purchaser during the Warranty Period.
What is the limitation of liability for Bell?
Limitation of Liability. To the extent permitted by applicable law and except where prohibited for Quebec residents, Bell's total cumulative maximum liability for negligence, breach of contract, tort or any other claims or causes of action, including fundamental breach, in connection with any Battery or this Warranty is limited to payment, upon request, for actual and direct damages up to a maximum amount equal to the purchase price of the Original Battery, and all other damages , including without limitation indirect, special, consequential, incidental, economic, exemplary or punitive damages, are excluded. You may also be subject to other limitations and exclusions of liability, and obligations, as set out in any Bell terms of service that apply to you. These terms survive the expiry of the Warranty.
What to do if my Bell battery isn't working?
What Should I Do? Ontario and Québec residents please call Bell at 1 866 310 BELL (2355) and residents of the Atlantic provinces please call 1 866 342-7367, so that Bell can confirm that the Original Battery is within the Warranty Period and attempt to diagnose and correct the malfunction over the telephone . Be sure to keep your proof of purchase to establish the date of purchase of the Original Battery; otherwise Bell may have to estimate the date of purchase.
How to delete a schedule on Bell?
Delete an existing schedule. You can delete existing schedules by clicking on the 'X' next to the schedule you wish to delete. This will delete the entire schedule. Open your web browser and visit bell.ca/homehub (or 192.168.2.1). From the Home screen, click on Access control.
What is access control?
Access control only blocks Internet connections; it will not prevent devices from accessing other devices on the local network (e.g. , network printers, local file sharing between devices). With your Home Hub 1000 modem, you can specify time periods when particular devices cannot access the Internet.
