Remote-access Guide

bgw210-700 how to remote access modem settings via internet

by Garfield Quigley Published 2 years ago Updated 2 years ago

Open a BGW210 to remotely access it
  1. Connect your computer to the internet. The connection can be through a wireless network or LAN.
  2. Open your browser and type 192.168.1.254 into your address bar.
  3. You will then be directed to a login page.
  4. Once done, you will find your router's web interface and access the settings.
Jun 7, 2020

How do I connect more computers to the bgw210-700 broadband gateway?

You can connect more computers and other devices to the BGW210-700 Broadband Gateway using wireless or wired Ethernet. The BGW210-700 Broadband Gateway has four wired Ethernet ports that can be used to connect computers or other devices.

What is my Arris bgw210-700's default IP address?

This is your router's IP address, sometimes called the computer's default gateway. The Arris BGW210-700 router's default IP address is: 192.168.1.254 Enter your router's IP address into the address bar of your browser and click the enter button on your keyboard. You should now be on a page called Status.

How do I replace the power supply or cord on bgw210-700?

If the power supply or cord becomes damaged or needs to be replaced, to obtain an authorized replacement please contact AT&T customer service by phone (1.800.288.2020) or via website (www.att.com/support). The first computer you connect can be used to configure the BGW210-700 Broadband Gateway settings.

How do I Test my AT&T bgw210 internet speed?

Run the AT&T Internet Speed Test from a desktop or laptop wired to your gateway to see download and upload speeds. Devices that use older standards like 802.11b or 802.11g won’t be capable of reaching the maximum wireless speeds supported by the BGW210.

How can I access my modem remotely?

All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.

How do I access my BGW210 modem?

Type 192.168. 15.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Arris BGW210-700 ATT is (blank).

How do I reset my AT&T modem remotely?

Sign in to Smart Home Manager and select Network.Scroll to and select Home Network Hardware.Select Wi-Fi Gateway and then Restart.Select Restart again.

How do I access my router settings for AT&T?

From a device that is connected to the AT&T Wireless Internet network, open the web browser then go to http://attwirelessinternet. Enter the Login, then click LOGIN. 2. ACCESS MODEM SETTINGS: Click the Wi-Fi tab then click Edit under the desired Wi-Fi frequency band.

How do I put my AT&T modem in passthrough mode?

IP Passthrough mode setup for AT&T U-verse®Open a web browser and enter the IP address of your gateway located at the back label (ex. 192.168. 1.254). ... Select Firewall and click IP Passthrough.On the Allocation Mode section, select Passthrough from the drop-down menu.

What is IP passthrough AT&T?

IP Passthrough means the AT&T supported CPE device terminates the DSL, authenticates with the network (Receives a WAN IP) and shares that IP address with a single device connected to the AT&T supported CPE equipment.

Can you reset a modem remotely?

Another method to remotely reset your router is to plug it into a smart plug. This way, any time you're having internet issues and need to reset the router, you can open the smart plug app on your phone, disable power to the router, and then re-enable it to restart it.

How can I reset my router remotely?

You can do this kind of remote management by entering the wireless router's IP address into a standard web browser, logging in with your network credentials such as default username and password. Look for a setting devoted to resetting the wireless router or restoring it to its factory default settings.

Can you reset modem from computer?

To reset your cable modem to factory default settings using the Factory reset software button: Launch a web browser from a computer or mobile device that is connected to your network. Enter http://192.168.100.1. Enter your cable modem or modem router's user name and password.

How do I find the IP address of my AT&T router?

Open the Smart Home Manager app on your device. Go to Network then select Connected devices. Choose the device you want the IP address for. Scroll to Device info to see the IP address.

Is BGW210-700 a router or modem?

AT&T Arris BGW210-700 Broadband Gateway WiFi Modem Router.

How do I reset my AT&T modem BGW210?

Reset gatewayPress and hold the gateway Reset button for at least 10 seconds. If you let go before 10 seconds, the gateway will reboot, but it won't reset.Wait until the gateway restarts and all the status lights are lit.See if the Broadband or Service status lights are solid green. If so, the reset worked.

What is WPS button on BGW210?

The PUSH method establishes Wi-Fi connectivity if you push the WPS button on the front panel of the BGW210-700 Broadband Gateway and on the Wi-Fi device. Upon WPS button push, the WPS button light flashes green until WPS is completed successfully, at which point it will stay green for 5-minutes (unless pushed again).

How do I log into my Arris router?

Arris Login StepsConnect To The Arris Network. To set up any router, you must stay connected to its network. ... Enter The Default Login Information. In the username and password fields, enter the printed values on the sticker at the side or bottom of your router.

What does the green light on my Ethernet gateway mean?

After the gateway recognizes the computer, the Ethernet light turns steady green and blinks when the computer starts transferring data with the gateway. See Status Indicator Lights (page 17) under Basic Troubleshooting for all Ethernet light indications.

What is the ARRIS BGW210-700?

This hardware install and operation guide consists of six product information chapters presented as follows:#N#1. ARRIS BGW210-700 Broad band Gateway Introduction (page 5) — Describes the ARRIS® document suite, purpose, and structure of this guide .#N#2. Preliminary Safety Instructions (page 7) — Provides power supply, telecommunication, and ventilation safety instructions.#N#3. Hardware Gateway Installation (page 9) — Provides the rear panel illustration, a cabling overview, and procedures to perform BGW210-700 Broadband Gateway connections for the power adapter, wired Ethernet, wireless devices, Internet, and VoIP telephones.#N#4. Basic Troubleshooting (page 16) — Provides simple suggestions for troubleshooting problems with the initial configuration of the gateway.#N#5. Technical Specifications (page 25) — Presents system and device specifications and important compliance and safety statements.#N#6. Important Safety Instructions (page 27) — Provides product, telecommunication, and electrical cautionary information, as well as conformance, radiation, and gateway disposable information

How to connect a BGW210-700 to a power supply?

The power adapter supplies power to the BGW210-700 Broadband Gateway.#N#1. Connect the appropriate end of the power adapter cable to the BGW210-700 Broadband Gateway rear panel POWER port.#N#2. Connect the power plug end to the electrical outlet.#N#After the BGW210-700 Broadband Gateway is powered on, the power light blinks green momentarily and then remains steady green.#N#For all power light indications, see Status Indicator Lights (page 17) under Basic Troubleshooting.#N#Warning: Use only the power supply and cord that came with the BGW210-700 Broadband Gateway. Failure to use the authorized power supply and cord may cause electric shock, fire, bodily injury, and/or property damage. If the power supply or cord becomes damaged or needs to be replaced, to obtain an authorized replacement please contact AT&T customer service by phone (1.800.288.2020) or via website (www.att.com/support).

How many Ethernet ports does a BGW210-700 have?

The BGW210-700 Broadband Gateway has four wired Ethernet ports that can be used to connect computers or other devices. As shown in the illustration below, to connect a computer to the BGW210-700 Broadband Gateway: 1. Connect one end of the Ethernet cable to one of the Ethernet ports on the BGW210-700 Broadband Gateway.

How far away is the BGW210-700?

Note: To prevent interference with cordless phones, ensure that the BGW210-700 Broadband Gateway is at least 5 feet (1.5 m) from any cordless phone base station. After the gateway recognizes the phones (Line 1 and Line 2), the Phone 1 & Phone 2 lights turn steady green and blink when the associated phone is in use.

What happens if you don't use the power cord on a BGW210-700?

Failure to use the authorized power supply and cord may cause electric shock, fire, bodily injury, and/or property damage.

What precautions should be taken when using a telephone?

When using telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury, including the following:#N#1. This device is intended for indoor use only.#N#Warning: Do not install this gateway outdoors.#N#Warning: Installing and operating this gateway outdoors is a violation of FCC rules.#N#2. Do not use this product near water, for example, near a bathtub, washbowl, and kitchen sink or laundry tub, in a wet basement or near a swimming pool.#N#3. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.#N#4. Do not use the telephone to report a gas leak in the vicinity of the leak.#N#Caution: The external phone should be UL listed, and the connections should be made in accordance with Article 800 of the National Electric Code (NEC).#N#Caution: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line Cord.

What to do if you can't log in to your arris router?

If you are unable to log in even after trying the above list of passwords you may need to consider a reset for your router. Our guide How to Reset a Router can help you with that. After resetting the Arris BGW210-700 router your username and password will be reverted back to factory defaults.

What is a BGW210-700 router?

Sometimes you need to unblock some of these connections so you can run a game or application. This is called opening a port or port forwarding . Port forwarding is literally forwarding a port from the Internet to your home network.

How to open ports on arris router?

You need to follow the steps below to open ports in your Arris BGW210-700 router: Set up a static IP address on the computer or device that you are forwarding ports to. Go ahead and access your Arris BGW210-700 router. Find the Port Forwarding section in your Arris BGW210-700 router.

Why is it important to set up a static IP address in the device that you are forwarding a port to?

This ensures that your ports remain forwarded even after a reboot, power outage, or other type of device or router disconnect.

How to check if my router is working?

Enter your router's IP address into the address bar of your browser and click the enter button on your keyboard. You should now be on a page called Status.

Why do we create network utilities?

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Where is the address bar on a computer?

Once you have opened up a browser window, find the address bar. This is usually at the top of the page like the image below shows.

Establish baseline speeds

Running a speed test shows your baseline speeds, both wired and wireless.

Gateway location and connections

Your home environment may affect performance negatively. For optimum performance, place your gateway:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9