Enable capability for remote access
- On the BCM console, click Global Settings > Administrators.
- Click and administrator (must not be admin), and click Security Profile .
- In the Capabilities tab, ensure that the Remote Control capabilities are enabled.
Full Answer
How do I Remote Control BMC client management devices?
Only devices running on these OSes and installed with a BMC Client Management agent can be remote controlled. URL to access BCM server. Contact a BCM administrator. On the BCM console, click Global Settings > Administrators. Click and administrator (must not be admin), and click Security Profile .
How do I enable remote access in BCM?
Enable capability for remote access 1 On the BCM console, click Global Settings > Administrators. 2 Click and administrator (must not be admin), and click Security Profile . 3 In the Capabilities tab, ensure that the Remote Control capabilities are enabled.
How to connect to a BMC server using the BMC portal?
Connect to a BMC Server Using the BMC Portal Remote Console. 1 1. Go back to the BMC portal Servers section. 2 2. Locate your server and click Actions. 3 3. Select Connect from the menu. 4 4. Click Connect to Server on the warning popup. The Remote Console loads in a new window. Note: You need to allow popups when using the Bare metal ...
How do I access the new BMC policy&procedure platform?
Click the button above to log into mail.bmc.org and check your BMC mail, set away messages, and view your contacts and calendars. Click the button above to view your archived emails. Click the button above to log into PolicyTech, the new BMC Policy & Procedure platform. Click the button above to access Epic and select other clinical applications.
What is BMC remote access?
The BMC Client Management is an advanced systems management software that provides a reliable way to monitor all systems on a network.
How do I connect to BMC VPN?
Open Pulse Secure on your computer and confirm that the BMC-Imprivata connection is available If it is not, click the + icon and add a connection. Name the connection BMC-Imprivata and enter portal.bmc.org/imprivata as the connection URL. 2. Click Connect.
How to access BMC Console?
To launch your newly installed Console, select Start > Programs > BMC Software > Console or double-click the console desktop icon. To start the console, type BMCClientManagementConsole , then press Enter . To start the console, double-click the icon for the console on the desktop.
What is remotely controllable device?
In electronics, a remote control (also known as a remote or clicker) is an electronic device used to operate another device from a distance, usually wirelessly. In consumer electronics, a remote control can be used to operate devices such as a television set, DVD player or other home appliance.
How do you use a BMC server?
For Windows servers, the username is Admin....SSH into BMC ServerLog in to the BMC portal.Navigate to the Servers page.Click the name of the server to load the Server Details.Click the Network & IP Settings tab.The Public IP Allocations shows the assigned IPs to use to access the server.
How do I set up pulse secure on Mac?
Download the Pulse Secure Client.Download the Pulse Secure Client for Mac from the Smith Software site. Scroll down to the Misc. section.Double-click the pluse_v5....... pkg to start the install.Accept the defaults and if prompted, enter for your username and password to install new software.Restart your computer.
How do I access my baseboard management controller?
There are two ways to access BMC: From the serial console port, access the BMC shell by pressing Ctrl+G and end the session by pressing Ctrl+D. Pressing Ctrl+G, while connected to the console port will not prompt for a username or password even if a root password is set.
What is BMC console?
The browser-based BMC Application Management Console (Console) is the primary user interface for the product and provides access to most of its features and functions.
How do I connect to Lenovo BMC?
SolutionConnect to the Lenovo XClarity Controller by using the web browser.Login to the LXCC.In the "System Information and settings" panel, click the right arrow of BMC IP address or click "BMC Configuration" → "Network" on the left navigation panel.Set the "Host Name", "Method", IP address, Network mask, gateway.More items...
Can I remotely access another phone?
When you (or your customer) run the SOS app on the Android device it will display a session code that you will enter on your screen to remotely view that device. Users with devices running Android 8 or higher will be prompted to turn on accessibility in Android to allow remote access.
How can I control another phone?
Tip: If you're wanting to control your Android phone remotely from another mobile device, just install the TeamViewer for Remote Control app. As with the desktop app, you'll need to enter the device ID of your target phone, then click “Connect”.
How do I connect to a remote device?
Access a computer remotelyOn your Android phone or tablet, open the Chrome Remote Desktop app. . ... Tap the computer you want to access from the list. If a computer is dimmed, it's offline or unavailable.You can control the computer in two different modes. To switch between modes, tap the icon in the toolbar.
How do I connect to Lenovo BMC?
SolutionConnect to the Lenovo XClarity Controller by using the web browser.Login to the LXCC.In the "System Information and settings" panel, click the right arrow of BMC IP address or click "BMC Configuration" → "Network" on the left navigation panel.Set the "Host Name", "Method", IP address, Network mask, gateway.More items...
What is BMC port?
A baseboard management controller (BMC) is a specialized service processor that monitors the physical state of a computer, network server or other hardware device using sensors and communicating with the system administrator through an independent connection.
What is a BMC console?
The browser-based BMC Application Management Console (Console) is the primary user interface for the product and provides access to most of its features and functions.
What is integrated BMC console?
The Intel® Integrated BMC Web Console is part of the standard BMC firmware/Server Management Software. The Integrated BMC Web Console feature is used to access the remote KVM. This section describes both the interfaces and how to use them. The interfaces are accessed using TCP/IP protocol.
Prerequisite
The new macOS Mojave application security alert restricts the keyboard and mouse movements when using the Remote Control and Direct Access features. When you launch these features for the first time, a dialog displays asking for the access permission. To grant the access, proceed as follows:
Remote Manager Licenses
Contrary to the other BMC Client Management modules, the Remote Manager requires two different licenses:
Remote Manager capabilities and access rights
To be able to directly and remotely access devices an administrator needs specific capabilities and access rights for the different functionalities.
How to connect to a BMC server?
To test if you can access your server using the Remote Console and your credentials: 1. Go back to the BMC portal Servers section. 2. Locate your server and click Actions. 3.
What is BMC console?
The Remote Console feature of the Bare Metal Cloud (BMC) portal is an easy and secure way to connect to your BMC servers without SSH keypair. The BMC consoling only works with the password-based authentication.
How to SSH into BMC?
To find the server’s public IP address: 1. Log in to the BMC portal at https://bmc.phoenixnap.com/. 2. Navigate to the Servers. 3. Click the name of the server to load the Server Details.
Where is the public key in BMC?
When purchasing a server through the BMC portal, the field where you provide a public key is at the bottom of the screen. Select a saved key or add a new one: By using SSH key pair, users do not expose any of their passwords.
How to enable remote access in BCM?
Enable capability for remote access. On the BCM console, click Global Settings > Administrators. Click and administrator (must not be admin), and click Security Profile . In the Capabilities tab, ensure that the Remote Control capabilities are enabled.
How to configure remote control settings?
To configure connection settings at an administrator-level, for all the remote control sessions, follow these steps: On the remote control browser, top right corner, click the administrator profile > Preferences. On the Preferences window, set the connection settings. Preferences.
How to start a remote session?
To start a remote control session, either double-click a device or Click next to a device. It is possible to remote control multiple devices at a time. To switch between multiple remote control sessions, click a device thumbnail to switch to that remote control session.
What is BCM 12.6?
In addition to the classic remote control feature through the BCM console, 12.6 release enables administrators to remote control devices through a web browser. This browser-based technology to remote control devices does not require you to run the BCM java console on the device.
What information does an administrator request from a remote device?
Information requested could be log data to troubleshoot issues or configuration information or some other information from the remote controlled devices.
Can a BCM agent be remotely controlled?
Only online devices that are running Windows or macOS and running a BCM agent can be remote controlled. In the browser window, enter the URL, https://<IPAddressMaster>: <MasterHttpPort> /webconsole. Where <IPAddressMaster> is the IP address of the master server or the hostname of the server.
Can you send text to a remote device?
Only text can be sent to or requested from a remote controlled device. Files cannot be transferred to or from a remote controlled device. To send information to the remote controlled device: Start a remote control session. In the Preferences menu, if the Hide Toolbar settings is enabled, click to view the toolbar.
BMC Help Desk – File Downloads
Windows 7 32/64 bit VPN Client Custom Installer (.BAT) Configure (.BAT)
Pulse Secure VPN
Windows 7 32/64 bit VPN Client Custom Installer (.BAT) Configure (.BAT)