How do I create a VPN for Juniper Secure connect?
To create a remote access VPN for Juniper secure connect: Choose Create VPN > Remote Access > Juniper Secure Connect on the upper right-side of the IPsec VPN page. The Create Remote Access (Juniper Secure Connect) page appears.
How does Juniper Secure connect work with SRX?
Juniper Secure Connect downloads the configuration from SRX Services devices and chooses the most effective transport protocols during connection establishment to deliver a great administrator and user experience. To create a remote access VPN for Juniper secure connect:
How can Junos XML protocol client applications protect system resources?
In addition, Junos XML protocol client applications can use Secure Sockets Layer (SSL) or the Junos XML protocol-specific clear-text service, among other services. To protect system resources, you can limit the number of simultaneous connections that a service accepts and the number of processes owned by a single user.
What is the troubleshooting procedure for Juniper BNG?
The troubleshooting procedure, which involves the execution of operational scripts and CLI configlets, is applicable only to Juniper Networks devices. The configuration audit function is enabled only when the BNG service state is Deployed.
How does broadband remote access server work?
A broadband remote access server (BRAS, B-RAS or BBRAS) routes traffic to and from broadband remote access devices such as digital subscriber line access multiplexers (DSLAM) on an Internet service provider's (ISP) network. BRAS can also be referred to as a broadband network gateway or border network gateway (BNG).
What is a BRAS function?
A bra is a form-fitting undergarment designed to cover, support and elevate a woman's breasts. It is important that a woman chooses the right type of bra in order to protect the general health of the breasts. A bra that doesn't fit well and offers little support can stretch and displace breast tissue.
How do I enable FTP in Juniper switch?
To set up remote access and file-transfer services:Enable SSH access. [edit groups global] user@host# set system services ssh.Enable Telnet access. [edit groups global] user@host# set system services telnet.Enable FTP. ... (Optional) Apply the configuration group. ... Commit the configuration.
What subscriber management functions can BNG perform?
The BNG router not only performs the routing function but also communicates with authentication, authorization, and accounting (AAA) server to perform session management and billing functions. This makes the BNG solution more comprehensive. Different subscribers can be provided different network services.
What is the difference between bras and BNG?
Broadband Remote Access Server (BRAS) was the term previously used, it is now Broadband Network Gateway (BNG). There is no functional difference as one is the older term, and the other is the newer.
What is the difference between PPPoE and IPoE?
In the comparison of IPoE and PPPoE, first of all, PPPoE is a Connection Oriented protocol. Session establishment is done before using this protocol. On the other hand, IPoE is a Connectionless protocol.
How do I enable SFTP in Juniper?
To enable the incoming SFTP connections, configure sftp-server:To enable incoming SFTP connections include the sftp-server statement at the [edit system services ssh] hierarchy level: [edit system services ssh] user@host# set sftp-server.Commit the configuration. [edit system services ssh] user@host# commit.
What port is FTP?
port 21FTP is a TCP based service exclusively. There is no UDP component to FTP. FTP is an unusual service in that it utilizes two ports, a 'data' port and a 'command' port (also known as the control port). Traditionally these are port 21 for the command port and port 20 for the data port.
What is remote SSH?
SSH or Secure Shell is a network protocol that connects users to a remote computer over a secure connection. This allows administrators and other authorized users to connect to secure computers over a network that is not secure, like the Internet. This is accomplished through the use of encryption.
How do you configure BNG?
The general steps for configuring the BNG router is as follows:Configure the BNG to use gRPC. See Configure a Secure gRPC Connection on the BNG Router. ... Create a routing instance and specify a domain profile that has information about allocating prefix addresses from the APM-managed partitions.
Is BNG a bras?
BNG (Broadband network gateway) or BRAS (Broadband remote access server) is one of the key components of Stingray Service Gateway. It ensures flexible control over user sessions, management of data plans by customer, and introduction of advanced options.
What is BNG Huawei?
Hi sachandio,BNG is an acronym for the broadband network gateway control device. It is mainly used in IPoE authentication scenarios. IP edge nodes are called broadband network gateways (BNGs).
What are the parts of a bra called?
Parts include the band, gore, side panel, cup, apex, neckline, underwire, strap, ring, slider, strap join, and closure.
What is a bra hook called?
Gore – This is the centre part of the bra, where the two cups meet. J-hook – A feature of many convertible bras, the j-hook is a hook and eye on the back of the bra straps that allows you to convert your bra into a racerback. The centre gore is the part where the cups meet.
What are bra wings?
Bra wings are the strips of fabric that go around the sides and back of your body, attaching to the cups at one end and the hook-and-eye fastening at the other. Most people just refer to this part of the bra as the band, but there's a slight difference between the two terms. In some bras, the wings are the band.
How does a bra clasp work?
Generally clasps are plastic or metal pieces where one side fits down into the other side. When the clasp is flattened, it snaps in place and locks together. Place one hand on each side of the clasp. Lift the edges of the bra up and toward you so that the clasp unlocks.
B-RAS Data Flow
The router performs several tasks for a digital subscriber line (DSL) PPP user to establish a PPP connection. This is an example of the way B-RAS data might flow:
AAA Overview
Collectively, authentication, authorization, and accounting are referred to as AAA. Each has an important but separate function.
How to retrieve SSH host key?
Typically, SSH host key information is automatically retrieved when you set a URL attribute for SCP using the archival configuration archive-sites statement at the [edit system] hierarchy level. However, if you need to manually update the host key database, use one of the following methods.
How to configure SSH known hosts?
To configure SSH known hosts, include the host statement, and specify hostname and host key options for trusted servers at the [edit security ssh-known-hosts] hierarchy level:
What is SFTP in Junos?
SSH File Transfer Protocol (SFTP) is a network protocol that provides file access, file transfer, and file management over any reliable data stream. Starting in Junos OS Release 19.1R1, we have globally disabled the incoming SFTP connections by default. If desired, you can globally enable incoming SFTP connections by configuring the statement sftp-server at the [edit system services ssh] hierarchy level. Prior to Junos OS Release 19.1R1, incoming SFTP connections were globally enabled by default.
How to configure hash algorithm for SSH?
To configure the hash algorithm used by the SSH server when it displays key fingerprints, include the fingerprint-hash statement and specify md5 or sha2-256 at the [edit system services ssh] hierarchy level:
What command is used to open a connection to a remote device?
You can use the CLI ssh command to use the secure shell (SSH) program to open a connection to a remote device:
What version of SSH is enabled?
By default, only version 2 of the SSH protocol is enabled.
Why is client alive important?
The client alive mechanism is valuable when the client or server depends on knowing when a connection has become inactive. It differs from the standard keepalive mechanism because the client alive messages are sent through the encrypted channel. The client alive mechanism is not enabled at default. To enable it, configure the client-alive-count-max and client-alive-interval statements. This option applies to SSH protocol version 2 only.
What is a preshared key?
Pre-shared Key (default method)—Specifies that a preshared key, which is a secret key shared between the two peers, is used during authentication to identify the peers with each other. The same key must be configured for each peer. This is the default method.
What is the authentication prompt in Windows Hello?
An authentication prompt is displayed when you connect in the client system. The VPN connection will only be initiated after successful authentication through the method configured for Windows Hello (fingerprint recognition, face recognition, PIN entry, and so on).
What happens during IPsec edit?
During edit the IPsec policy description will be displayed. IPsec policy and remote access profile descriptions will be updated.
What is Juniper Secure Connect?
Juniper Secure Connect provides secure remote access for the users to connect to the corporate networks and resources remotely using the Internet. Juniper Secure Connect downloads the configuration from SRX Services devices and chooses the most effective transport protocols during connection establishment to deliver a great administrator and user experience.
What is DPD in Juniper?
Enable the dead peer detection (DPD) option to allow the Juniper Secure Connect client to detect if the SRX Series device is reachable.
How long does a DPD packet take?
The Range is 2 through 60 seconds and default is 60 seconds.
What is the range of DPD?
Enter the maximum number of unsuccessful dead peer detection (DPD) requests to be sent before the peer is considered unavailable. The Range is 1 through 5 and default is 5.
Create Workflow for Broadband Network Gateway Services
The procedure to create a BNG service order is the same for Juniper Networks devices and third-party devices.
Viewing Broadband Network Gateway Services Details
A BNG service is created only with common artifacts and no VPRN service is associated with a BNG service. Hence, the service details are not displayed in CPP. In this case, instead of service details, the following tabs are displayed, if available:
Child-Endpoint Support for Broadband Network Gateway Services
For a BNG service, you can provision parent-child relationships between the endpoints. You can provision it as a single-task workflow or multitask workflow.
API for Finding the Service Element ID
To modify or delete an endpoint, you must specify the service element ID and set the Record OP type tag as Modify or Delete.
What is static service provisioning in Junos?
Starting in Junos OS Release 17.4R1, static service provisioning is supported for both Routing Engine-Based and MS-MPC/MS-MIC–based captive portals. Starting in Junos OS Release 19.3R2, static service provisioning is also supported for MX-SPC3–based captive portals if Next Gen Services are enabled on the MX-SPC3 services card. Static service provisioning means you can configure service provisioning in a static profile. You can specify user-defined variables (for example, http://portal.wifi.example.com/xx?wlanuseraddr=%subsc-ip%&nasaddr=%nas-ip%&acname=%ac -name%&url=%dest-url%&userlocation=%nas-port-id%&usermac=%mac-sa%& session-id=%sess-id%&username=%user-name%&wlanuseraddrv6=%subsc-ipv6%) for services that are populated by means of a RADIUS VSA or a Change of Authorization (CoA) message.
What is converged service provisioning?
Starting in Junos OS Release 17.2R1, converged service provisioning is supported for both Routing Engine-Based and MS-MPC/MS-MIC–based captive portals. Starting in Junos OS Release 19.3R2, converged service provisioning is also supported for MX-SPC3 services card–based captive portals if Next Gen Services are enabled on the MX-SPC3 services card. Converged service provisioning means you can configure service provisioning in a dynamic profile. You can specify user-defined variables for services that are populated by means of a RADIUS VSA or a Change of Authorization (CoA) message.
What line card supports HTTP redirect?
Starting in Junos OS Release 15.1R4, the only line card and interface card combination that supports HTTP redirect services on MX Series routers is the Multiservices Modular Port Concentrator (MS-MPC) with a Multiservices Modular Interface Card (MS-MIC). This combination provides improved scaling and high performance. MS-MICs and MS-MPCs have enhanced memory (16 GB for MS-MIC, 32 GB per NPU of MS-MPC) and processing capabilities. The services interfaces on MS-MPCs and MS-MICs are identified in the configuration with an ms- prefix (for example, ms-1/2/1).
What is a captive portal?
The captive portal is often the initial page a subscriber sees after logging in to a subscriber session. The captive portal also receives and manages HTTP requests to unauthorized Web resources.
Does HTTP traffic flow to the services card?
However, any HTTP traffic destined outside of the walled garden flows to the services card.
Product Overview
Network traffic is growing significantly faster within the metro, fueled by the advent of cloud, 5G, and the accelerated deployment of Internet of Things (IoT) devices and access points.
Product Description
The integration and operation of PON services with other access services has never been easier.
The Next Evolution in PON Technology
The 10 Gbps (10G) PON OLT transceivers are hot-pluggable with built-in Ethernet- to-10G PON media access control (MAC) bridging. They plug directly into small form-factor pluggable plus transceiver (SFP+) ports on supported ACX Series routers, enabling discrete port by router port assignment to either PON or Ethernet services.
Simple Web-Based Management for Converged 10G PON Access
The PON Manager Web interface provides direct access to all PON components, which allows templated provisioning and management. The simple-to-use platform supports full customization of all services and visualization of device MIBs.
Architecture and Key Components
Juniper Cloud Metro is Juniper’s overarching vision of how metro networks will transform to support emerging, disruptive, and pioneering technologies in the cloud, 5G, and IoT era.
Features and Benefits
Juniper’s Unified PON solution goes beyond solving persistent bandwidth consumption challenges. It delivers a new FTTx paradigm that supports residential, business, and mobile transport services over a single architecture for operators.
Ordering Information
The following ordering information applies to 10G PON OLT transceiver and related software. Ordering information for other components in the Unified PON solution can be found in the respective datasheets.