The way Buffalo tackles this is by using a protocol called upnp. The upnp enabled NAS Drive can request the upnp enabled Router to send to it all traffic destined to port 9000 (web access port). This way the remote request coming to the router from the internet will go to the router and you can get access to your NAS Drive.
Full Answer
How do I connect my Buffalo NAS drive to my computer?
Firstly, you'll want to take your Buffalo NAS drive and plug in the power cord. The plug will go into the wall and the other end will need to go into the bottom socket.
How do I access my files from a NAS drive?
Go to www.buffalotech.com and download WebAccess for Windows. Install WebAccess. Locate the setup file on your desktop and double-click on it to run it. Do the initial setup for WebAccess. Before you’re able to access your files and folders in your NAS, you have to properly link the device to your computer.
How do I view a list of shares on my NAS?
Open NAS Navigator. If you do not have NAS Navigator installed, follow the directions here. Right-click on the NAS. Select "Browse Shares" from the pop-up menu.
What is remote management service?
Can you restart a unit remotely?
Can you share debug logs with Buffalo?
About this website
How do I access my Buffalo NAS remotely?
6Configure each setting as below.Select. Enable. for. Web Access Service. .Select. Enable. for. Use BuffaloNAS.com. .Enter a desired name into. BuffaloNAS.com Name. . Take note of this BuffaloNAS.com name. This will be used to open a shared folder from a remote location. ... Select. Enable. for. Auto-Configure Firewall (UPnP) . ... Click.
How do I access files on a Buffalo NAS?
Logging InClick. Login. at the right end of the toolbar.Enter the username and password registered to the Buffalo NAS device, then click. Login. .The login completes and the name of the logged-in user appears at the right end of the toolbar.
How can I access my Buffalo NAS from my Android?
0:454:42"WebAccess A" app for Android smartphone | BUFFALO - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst tap the web access a icon tap the NASS you want to access then tap the folder containing theMoreFirst tap the web access a icon tap the NASS you want to access then tap the folder containing the file you want to open. You can look through the files in icon view or list view.
How do I connect to Buffalo LinkStation?
Plug in the AC adapter and connect to the LinkStation. Power on the LinkStation by moving the switch on the rear of the unit to “On”. The power LED should begin blinking white. Once the LED is solid white the LinkStation is booted and ready to be configured.
How do I share a Buffalo NAS?
Creating a new Shared Folder on a Buffalo TeraStationLog in to the management GUI for the TeraStation. ... Navigate to the "File Sharing" tab and click the Folder Setup widget button.Click Create Folder.Enter a folder name and a user ID.
What is the default IP for Buffalo LinkStation?
Type 192.168. 11.150 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Buffalo LinkStation is root.
How can I access my NAS from my phone?
See the user manual for your NAS for further details.Tap on the More icon ( ) on the upper right and tap Settings.Tap on Remote access.Enter your remote access email address and password. Tap Sign in.In the list of storage devices, select your NAS. You can access files on the NAS's Public folder.
How do I access a network drive on Android?
How-to Access your Network Drive from any Android DeviceOpen the app tap on the 3 bars in the upper left of the screen and click on LAN.Select New (+)On this screen you will configure your Network Drive.More items...
How do I sync my Android phone to my NAS?
0:108:15Android smartphone sync photos and videos to NAS SMB share - YouTubeYouTubeStart of suggested clipEnd of suggested clipShare for example a nas server in your local. System. So in our example here we want to synchronizeMoreShare for example a nas server in your local. System. So in our example here we want to synchronize the photos which i make with my android device and trinket to our network location.
Can I connect Buffalo LinkStation directly to my computer?
NAS Navigator2 will proceed by setting up Automatic IP....How to: Connect a TeraStation or LinkStation directly to a PC.1.Connect the Ethernet cable from PC LAN port to the NAS device.2.For a PC, double-click the icon. For Mac OS, click the icon in the Dock. NAS Navigator2 will start.3.Click [Refresh].1 more row•May 30, 2012
What is the admin password for Buffalo NAS?
passwordIf NAS Navigator is not installed, download and install the application by clicking on the provided URLs here: Windows or Mac. Log in to Settings. The default username and password are "admin" and "password".
How do I connect my Buffalo external hard drive?
Simply by attaching a USB hard disk device (HDD ) to USB port , Buffalo User Friendly firmware auto detects and configures the HDD device as a network attached storage to access and share files on local network . Connect USB HDD to the USB port on the wireless LAN router. Connect Client PC to Router.
How do I connect to LinkStation?
Connect the LinkStation to your network with an Ethernet cable and power it on. Launch a web browser and enter the LinkStation's IP address into the address bar to access Settings. If you do not know the LinkStation's IP address, you can use NAS Navigator to access Settings instead.
How do I reset Buffalo LinkStation?
The LinkStation will be restored to its factory default settings....Initializing from SettingsIn Settings, navigate to [System] - [Restore/Erase].Click [Restore LinkStation].The "Confirm Operation" screen will open. Enter the displayed number within 60 seconds, then click [Apply].
How do I install a Buffalo NAS Navigator?
More videos on YouTubeDownload the latest version of NAS Navigator from the Buffalo downloads page.Right-click on the file and extract it.Follow the wizard or use another application of your choiceto extract the file.After successful extraction, open the location folder.Double-click on the installation file.More items...
How to connect a Terastation to a Linkstation?
2. Plug in the Power cable / AC adapter and connect to the TeraStation / LinkStation. 3. Power on the TeraStation / LinkStation by pressing the Power button, or by moving the power switch to “ON”. 4. The power LED should start blinking.
How to secure a home office?
Learn the top 5 ways to secure and backup your home office here. 1. Connect the TeraStation / LinkStation to your network using the supplied Ethernet cable. Make sure your network has a DHCP server to assign an IP address to the NAS. For a home environment it can usually be your Wi-Fi router. 2.
Is Share on NAS mapped to Windows?
2. The Share on the NAS is now mapped to the Windows network drive and ready to use.
How to open Buffalo WebAccess?
Locate WebAccess. Open My Computer on Windows Explorer and look for the Buffalo WebAccess icon. It’s a red house with green and blue arrows. Double-click on it to open.
How to view shared folders in NAS?
Open NAS. Double-click on the NAS directory to view all the shared folders and files.
Do you have to link a NAS to your computer?
Before you’re able to access your files and folders in your NAS, you have to properly link the device to your computer. The NAS should have a proper name, and WebAccess should be enabled.
How to set up a Buffalo NAS drive?
Firstly, you'll want to take your Buffalo NAS drive and plug in the power cord. The plug will go into the wall and the other end will need to go into the bottom socket. Next, take the supplied ethernet cable and plug one end into one of your router's LAN ports , ...
What does "no access" mean in Buffalo NAS?
No access (none) (/) - The user cannot write data or view the shared folder. The shared folder will not be visible in the user's Buffalo NAS file location if you give them no access. To change a user's permission level, simply toggle the button you wish to set the permission level as.
What is a quota in NAS?
A quota simply limits the amount of storage space available to the user i.e. if they wish to move any files to the NAS drive. Once you are happy, click on OK to finish.
What is Buffalo NAS shared folder?
In your Buffalo NAS drive, shared folders allow certain users to access data and files in specific places. You can control the access level for different users, depending on what you want them to see and manage. Shared folders can be made for purposes like family, work and certain friends etc.
How to map a shared drive?
Select browse shares from the pop-up menu - When the shares appear, right-click on the shared folder you wish to map the network drive for and select map network drive.
What is access restriction?
Access restrictions enable you to amend the specific control a single user has with a shared folder, such as denied access, read-only access, or read and write access.
What is read and write access?
Read and write access (W/R) - The user can view, and write data onto the folder. This means they can view files, as well as add, remove or edit those files.
What is remote management service?
Remote Management Service allows TeraStation users to create a detailed list of managed systems, available at a glance by gathering device and usage information such as system status, used capacity, uptime, etc. You can also tag each device's important data such as maintenance contracts or warranty information for consolidated device management.
Can you restart a unit remotely?
Unit Restart & Shutdown - You can remotely restart or shutdown immediately, or at a scheduled time.
Can you share debug logs with Buffalo?
Acquire Debug Logs - You can share debug logs with Buffalo’s after-sales support for more precise troubleshooting.