- Step 1. Go to Buffalo Nas Remote Access website using the links below
- Step 2. Enter your Username and Password and click on Log In
- Step 3. If there are any problems, here are some of our suggestions
Full Answer
What is WebAccess and how do I use it?
Please try again later. WebAccess is a feature of many Buffalo devices that allows you to create a personal cloud for easy remote access and file sharing with anyone, anywhere over the Internet.
How do I apply to use remote management service?
You must be registered to Remote Management Service to use it. If you have not yet registered and would like to apply to use the service, refer to the URL below: Each new MSP/End User account must be created by Buffalo. When created the system will generate an email to the MSP/End User’s registered email address with a system generated password.
How do I get remote access to my account?
All users MUST complete an eRegister request and be approved by their manager to be granted remote access. If you have any questions or require assistance, please contact the IT Service Desk at (716) 859-7777.
What can I do with Buffalo TeraStation?
Unit Restart & Shutdown - You can remotely restart or shutdown immediately, or at a scheduled time. Firmware Updates - By keeping your TeraStation up to date you can be safe from vulnerabilities or add the latest features. Acquire Debug Logs - You can share debug logs with Buffalo’s after-sales support for more precise troubleshooting.
How do I access my Buffalo NAS remotely?
6Configure each setting as below.Select. Enable. for. Web Access Service. .Select. Enable. for. Use BuffaloNAS.com. .Enter a desired name into. BuffaloNAS.com Name. . Take note of this BuffaloNAS.com name. This will be used to open a shared folder from a remote location. ... Select. Enable. for. Auto-Configure Firewall (UPnP) . ... Click.
How do I connect to Buffalo NAS?
Mapping a Drive to a Buffalo NAS in WindowsOpen NAS Navigator. ... Right-click on the NAS.Select "Browse Shares" from the pop-up menu.Right-click on the shared folder you want to map to a drive letter.Select "Map network drive..." from the pop-up menu.Click on the drop-down menu to change the drive letter if desired.More items...
How do I connect to LinkStation?
Connect the LinkStation to your network with an Ethernet cable and power it on. Launch a web browser and enter the LinkStation's IP address into the address bar to access Settings. If you do not know the LinkStation's IP address, you can use NAS Navigator to access Settings instead.
What port does Buffalo LinkStation use?
The Buffalo NAS Drive runs this Web access feature on TCP Port 9000. Since your NAS drive is on private ip address, you cannot access it over the Internet. For it to be accessible over the Internet, you must access it over your public ip address.
Can I connect Buffalo LinkStation directly to my computer?
NAS Navigator2 will proceed by setting up Automatic IP....How to: Connect a TeraStation or LinkStation directly to a PC.1.Connect the Ethernet cable from PC LAN port to the NAS device.2.For a PC, double-click the icon. For Mac OS, click the icon in the Dock. NAS Navigator2 will start.3.Click [Refresh].1 more row•May 30, 2012
What is the admin password for Buffalo NAS?
passwordIf NAS Navigator is not installed, download and install the application by clicking on the provided URLs here: Windows or Mac. Log in to Settings. The default username and password are "admin" and "password".
How do I find my Buffalo LinkStation IP address?
Type 192.168. 11.150 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password.
How do I access shared folder in LinkStation?
in your computer and enter “\\LinkStation's name\Shared folder names$\” for the name. For example, if the LinkStation name is “LSXXX001” and shared folder name is “share”, enter “\\LSXXX001\share$\” to open it.
How do I reset my Buffalo NAS?
Initializing from SettingsIn Settings, navigate to [System] - [Restore/Erase].Click [Restore LinkStation].The "Confirm Operation" screen will open. Enter the displayed number within 60 seconds, then click [Apply].
How do I install a Buffalo NAS Navigator?
More videos on YouTubeDownload the latest version of NAS Navigator from the Buffalo downloads page.Right-click on the file and extract it.Follow the wizard or use another application of your choiceto extract the file.After successful extraction, open the location folder.Double-click on the installation file.More items...
What is BuffaloNAS com key?
BuffaloNAS.com Key This is the password (“key”) that protects your LinkStation's or TeraStation's BuffaloNAS.com name. Try to select a password that is not easily guessed by others.
How do I register my BuffaloNAS com name?
If you close the welcome screen, you can register directly from the NAS List with the procedure below. Tap . Tap [Name], enter a name for this connection, and then tap . Tap [Registration Type], then select [BuffaloNAS.com Name].
How do I connect my Buffalo external hard drive?
Simply by attaching a USB hard disk device (HDD ) to USB port , Buffalo User Friendly firmware auto detects and configures the HDD device as a network attached storage to access and share files on local network . Connect USB HDD to the USB port on the wireless LAN router. Connect Client PC to Router.
How do I access shared folder in LinkStation?
in your computer and enter “\\LinkStation's name\Shared folder names$\” for the name. For example, if the LinkStation name is “LSXXX001” and shared folder name is “share”, enter “\\LSXXX001\share$\” to open it.
How do I share a folder on a Buffalo NAS?
Creating a new Shared Folder on a Buffalo TeraStationLog in to the management GUI for the TeraStation. ... Navigate to the "File Sharing" tab and click the Folder Setup widget button.Click Create Folder.Enter a folder name and a user ID.
How do I reset my Buffalo NAS?
Initializing from SettingsIn Settings, navigate to [System] - [Restore/Erase].Click [Restore LinkStation].The "Confirm Operation" screen will open. Enter the displayed number within 60 seconds, then click [Apply].
How to create a group in Remote Management Service?
1. From the Remote Management Service console, click Users. 2. Click Create at the upper-right corner of the window. 3. Enter the desired user ID, username, and email address. Select the user group that the user will join and the user type: Click “Search” on the User Group, then click the grey “Search” icon again.
How to set up Terastation webUI?
From Settings, click Remote Management Service.#N#3. Click Next.#N#4. Enter the hostname of the device and a brief description of its location, then click Next.
How to generate device registration key?
1. From the Remote Management Service console, click Device Registration Keys. 2. Click Generate at the upper-right corner of the window. 3. Enter the expiration date and select the device group that the device will belong to, as well as the number of device registration keys you would like to generate.
Welcome to SENS!
Serving the Engineering School and the Faculty of Natural Sciences and Mathematics winter, spring, summer, and fall!
Work From Home
Given the current situation with regard to COVID-19, we expect that many faculty and staff will want to work from off-campus locations. Here are instructions on working from home.
Remote Desktop Access
UBIT has published instructions on how to access your work computer from home. Please note that it must be powered on, and it needs to have been configured by SENS for remote access. Please send email to senshelp@buffalo.edu if you need to access your work computer from a remote location.
SENS Timeshare Systems
The SENS timeshare systems provide remote access to Linux software, as well as for long-term "batch" operation. The pool of timeshare systems are collectively known as "linux.sens.buffalo.edu", and command-line connections can be made using client software such as PuTTY and SSH.
UBunix Timeshare Systems
Please see the previous section, as the instructions also apply to the UBunix timeshare systems.
Why is WebAccess needed on a Linkstation?
In order to enable WebAccess on a LinkStation, it is necessary to allow limited communication from the Internet through the firewall to the LinkStation.
How to access settings on Linkstation?
Launch a web browser and enter the LinkStation's IP address into the address bar to access Settings. If you do not know the LinkStation's IP address, you can use NAS Navigator to access Settings instead. Click on the "Advanced Settings" tile. You will be asked to log in.
Large Capacities that Belong to You
Unlike cloud storage, once you purchase the LinkStation, it’s yours and you can control how to store and back up data as you see fit— no need to pay monthly fees or deal with convoluted cloud storage pricing structures.
Easy to Set Up, Easy to Use
The LinkStation 700 is designed to be easy-to-use, saving valuable time and effort. Unlike other NAS manufacturer products, Buffalo systems are ready to go with hard drives included, so you can be up-and-running within minutes.
Enable Hybrid Cloud
No matter how you look at it, online cloud storage exposes your data to the dangers of cybercriminals. Having a NAS to act as a private cloud drive effects multi-layer data security, which is critical if you are serious about protecting your personal data from escalating cyberthreats such as ransomware.
Security Measures for Your Important Data
The LinkStation 700 personal NAS offers security benefits for those who want to take their file storage and backups to the next level. The LinkStation 700 runs on a closed system, with not even the system administrator having root rights.
Peerless Support on the Market
Buffalo provides award-winning, 24/7 North America-based customer support and a standard 2 to 3-year hardware warranty (including hard drive replacement) with product registration. Optional replacement warranty services provide next business day support, keep your hard drive options, and 5-year warranty service extension.
