How do I enable remote access on C-More?
Enable Remote Access On the C-more programming software call up the Panel Network by using the main menu | Setup | Panel Network… You could also select the panel network under Setup in the Function tab of the Navigation window. Select the Remote Access on the left-hand side of the Panel Network window.
What is remote access and how to use it?
The Remote user can fully operate and monitor the local HMI system and affect the function and control of the application the same as the local operator. Proper Control, Security and Safety Procedures should be considered and implemented when utilizing the Remote Access feature. There are various ways to control, limit and log remote users.
Can administrators connect remotely to a PC?
By default, administrators on your PC can always connect remotely to your computer even if they are not added as members of the Remote Desktop Users group. This tutorial will show you how to add or remove users as members of the Remote Desktop Users group to allow connecting remotely to your Windows 7, Windows 8, or Windows 10 PC.
What is the C-more remote HMI app?
SAFETY NOTICE: The C-more Remote HMI App allows the user to connect to remote C-more panels from Ethernet, Wi-Fi, or cellular network connections. The Remote user can fully operate and monitor the local HMI system and affect the function and control of the application just as the local operator controls it.
Where can I get C-more remote?
The C-more Remote HMI App can be downloaded from the iTunes App Store to any iPhone/iPad/IPod Touch devices running iOS version 4.3 or later.
Where is the login permission in C-more?
Active Login Permission Info: Located in the center of the status bar and displays the login permission level for the account that is presently active. There are three permission levels that can be used for each user account. View mode, View and Screen Control, and Full Control. These permission levels are stored in each C-more panel project and can only be changed by editing the project with the C-more programming software. See Setting up the Remote Access for additional information.
What is a VPN on a C-more?
VPN: Although the Remote Access feature for the C-more panel can be configured with password protection, connecting the C-more panel on an Enterprise network or the Internet exposes security risks. A secure and encrypted VPN connection is highly recommended if the C-more panel will be accessible from the Internet. A VPN (Virtual Private Network) uses encryption and other security mechanisms to ensure that only authorized users are allowed to connect and that the data cannot be intercepted. A VPN greatly reduces the chances of malicious behavior and unauthorized connections.
What is a C-more remote HMI?
SAFETY NOTICE: The C-more Remote HMI App allows the user to connect to remote C-more panels from Ethernet, Wi-Fi, or cellular network connections. The Remote user can fully operate and monitor the local HMI system and affect the function and control of the application just as the local operator controls it. Proper Control, Security and Safety Procedures should be considered and implemented when utilizing the Remote Access feature. There are various ways to control, limit and log remote users as explained in the topic Setting Up Remote Access.
How to add favorites to C-more?
Favorites can be added by selecting the Edit button from the Favorite menu or a favorite can be saved by using the connection Toolbar that appears only when connected to a remote C-more panel.
Where is the status bar on C-more?
The Status Bar is located at the bottom of the C-more Remote HMI App workspace and is displayed by default. It can be enabled or disabled by the user as needed from the settings screen. The status bar displays the following information:
What is the connection button?
The Connection button is used to select a method of connecting to the remote C-more panel.
Where can I get C-More?
C-More remote HMI App can be obtained from the Apple iTunes store, Google Play or Amazon App Store for mobile devices. Here is a link to help setup the C-More remote HMI app on your mobile device.
How to add remote HMI file to desktop?
This is a windows based program. We can add a shortcut to this file by right-clicking the file and selecting Create shortcut. This can be then placed on your Windows desktop.
What is a C-More HMI panel?
The C-More HMI Panel can function as a simple web server. A web server includes software and hardware that will respond to World Wide Web client requests. The communication used between client and server takes place using the Hypertext Transfer Protocol. (HTTP).
Can you control the C-More EA9?
We can now fully control our C-More EA9 HMI from this remote access window. The bottom left corner of the window will indicate that we are logged on and have full control.
Does C-more Remote Access require additional hardware?
No Additional Hardware requiredThe C-more Remote Access feature resides in the operator interface touch panel and requires no option modules. Simply configure the network settings in the panel project and connect the panel to a network. (This feature requires software and firmware version 2.4 or later to function.*)
Can I download apps from C-more?
Web Browser BasedSince applications can be downloaded from the C-more touch panel through a PC’s Web browser, authorized users can access and control the operator HMI panel remotely without purchasing or downloading additional software packages. **
How to check if a system has shared files?
You can see if a system has the shares easly by going to a command prompt and typing net share and noting the outcome.
Is admin share available on home versions?
Uh, just to make sure...... these aren't home-based operating systems are they? The admin shares are not available on the home versions.
How to install C-more USB driver?
was extracted to the location you chose. First, close the C-moresoftware and disconnect the USB cable from the PC. Then, browse to C-moreUSBDriver.exeand run it. If your OS is Windows XP, You will get this warning : Click Continue Anywayand InstallShield will install the driver. Click Finishin the Update Complete window. Plug the USB cable into the PC and the C-morepanel. The Found New Hardware Wizard will prompt you to search for the driver. Select “No not this time” , click Next. Select “Install the Software automatically (Recommended)” click
What is another option for accessing the IP Addressassigned to the touch panel?
Another option for accessing the IP Addressassigned to the touch panel is to use the C-more
How to check if Ethernet connection is working?
When using an Ethernetconnection to communicate between the touch panel and the PC and the communications does not seem to be working, the first area to check is the Ethernet status indicators located next to the 10/100 Base-T Ethernet Porton the rear of the panel. The Link Status LEDmust be displaying a Steady Green. If using an Ethernetconnection to program the touch panel, there are two basic ways to make the connection. You can use a “crossover” Ethernetcable to make a direct connection between the touch panel and the PC or a “straight-thru” Ethernetcable from the touch panel to a hub, switch, etc. that is also connected to the PC. Use the C-moreprogramming software to check the status of the Ethernetcommunications. From the Navigationwindow, select the Paneltab. At the bottom of the Paneltab is the
How to see Ethernet assignments in Windows XP?
Windows XP, open a Command Prompt (Run > CMD)and type IPCONFIG /ALL. A list of all Ethernet assignments for the PC will be shown.
What is the status indicator on RS-422/485?
The status indicators will show activity whether the serial communications is wired for RS-232 or RS-422/485. Electrical noise, pulse generating wiring and/or improper grounding can also cause problems with communications. Refer to the Electrical Noise Problemssection on page 8-17 for additional help. (Serialconnections between the touch panel and PLC continued on next page.)
Can another Ethernet connection be conflicted?
There can also be a conflict with another Ethernet connection that may be using the same
Does CF1 override flash memory?
In other words, the memory of a CompactFlash card on CF1 will override the panel’s internal Flash memory on power up or reboot, even if the CompactFlash memory card does not contain a project.
How to test serial port on C-more?
The serial ports on the C-more HMI can be tested using the HMI’s system setup screens. Access the Main Menu of the HMI’s system setup screens, press the Test Menu button, then press the Test Comm. Port button and select the appropriate port tab. You will need to fabricate a Loop
What is the C-more HMI?
TheC-more HMI includes built-in PLC communication protocol diagnostics that monitor the exchange of data between the panel and the PLC. The diagnostics look for the proper exchange of data, correct handshaking signals, addressing errors, incorrect data
How to get general error and warning on EA9?
There are multiple causes for general errors and warnings. To get specific information for a general error and warning, connect the EA9- RHMI to a PC via USB. See Chapter 5 - System Setup Screens, Using RHMI USB Remote for more information.
How to open remote desktop?
1 Do step 2 (Settings) and/or step 3 (Control Panel) below for how you want to open Remote Desktop Users settings. 2 Open Settings, and click/tap on the System icon. 3 Open the Control Panel (icons view), click/tap on the System icon.
What is remote desktop connection?
You can use the Remote Desktop Connection (mstsc.exe) or Microsoft Remote Desktop app to connect to and control your Windows PC from a remote device. When you allow remote desktop connections to your PC, you can use another device to connect to your PC and have access to all of your apps, files, and network resources as if you were sitting at your desk.
How to open lusrmgr.msc?
1 Press the Win + R keys to open Run, type lusrmgr.msc into Run, and click/tap on OK to open Local Users and Groups.
How to add a remote user to a Windows 10 laptop?
Go to the Remote tab. There, click on the button Select Users. The following dialog will open. Click on the Add button. The Select Users dialog will appear. There, type the desired user name to add or click on the Advanced button to select the user from the list.
Can you use local users and groups snap-in?
You can use Local Users and Groups snap-in if your Windows edition comes with this app.
