Locate the Reset Button on your Arris modem or router (typically found on the back of the device). If you can't find the button, search online for the router model you're using. Most router manuals have a diagram to outline each component. When you locate the button, press and hold it for at least 15 seconds.
Full Answer
Can I disable the Arris wireless security?
Note: It is NOT recommended to "disable" the Arris Wireless security. It will allow others to gain access to your network and could cause a potential security risk to personal folders, files, documents and allow others to contribute to your bandwidth usage.
How do I connect to my Arris account?
Click Start. Click Connect to. Click Connect. Enter your passphrase. ( Information on obtaining or changing your passphrase .) Enter your passphrase. ( Information on obtaining or changing your passphrase .) Click in the menu bar next to the time clock. Select and choose "ARRIS-XXXX" from the dropdown list.
How do I change the IP address of my Arris router?
At LAN Setup tab: 1 Change IP Address to 192.168.1.1. 2 Change Start IP Address to 192.168.1.2. 3 Change End IP Address to 192.168.1.254. 4 Click on Apply (Arris will restart and you’ll loose the wifi connection for few seconds).
How to fix Arris tg862 WiFi not working?
Connect to your Wifi router Turn on your wifi router and now plug the network cable between it and Arris at port 1. Now, connect your computer to your router wifi network (and notto Arris wifi). Disabling Arris TG862 Wifi
How to enable remote access?
How to log in to a remote location?
How do I disable Remote Access to my router?
To do this, open your router's web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it's disabled — it should be disabled by default on most routers, but it's good to check.
How do I access my Arris router remotely?
To Enable Remote Access Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear. NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager. There is no risk in proceeding to the Web Manager.
How do I remove a device from my Arris router?
Remove DeviceTap the Menu bar link on the top-left screen.Tap the Remove Device button.Tap the device to remove, then tap the Next button.On the pop-up box, tap the Yes button to delete the device.More items...
Should I enable remote connection on router?
Remote management is off by default. Because a hacker might try to break your router password, it is best to turn remote management off after use, so that the router cannot be administered from the WAN. To set the router password: Never use remote management unless the router password is changed from the default!
Can someone access my Wi-Fi remotely?
Yes, it's absolutely possible for your home network to get hacked. There are a couple of ways hackers can gain access to your network. One common method is to guess the password. It sounds simple, but routers often come with a preset default password that the manufacturer uses for all devices.
How do I access my router admin remotely?
All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.
How do I remove an unknown device from my network?
Follow the instructions below to identify and remove any unknown devices connected to your network using Home Network Security....Open the Home Network Security app.Tap the Menu icon.Tap Devices, select the unknown device.Deselect “Allow Home Network Access”
How do I remove devices connected to my WiFi?
An easy way to kick out unauthorized devices from your network is to simply change your wifi password. This will forcibly disconnect all devices from the network, so you will have to sign in again with the new password on all of your devices.
How do I control devices connected to my WiFi?
Manage devices connected to your Wi-Fi networkSign in to Smart Home Manager.Choose Network, then Connected Devices. Only devices connected to your network will show.Select the device you want to view. Then, choose the more option (three dots). From here you can: Edit device details. Add the device to a profile.
What is Remote Access on router?
A network device used to connect remote sites via private lines or public carriers. The router is required at both ends and provides the protocol conversion between the internal network (LAN) and the external network (WAN). See remote access concentrator and remote access server.
Should I disable web access from WAN?
You should keep that setting disabled, unless you are willing to put your router at risk. You cannot completely disable the web interface, and the LAN port over http cannot be changed. If you really need to free up port 80, you could switch it to HTTPS-only - https allows you to select which port to use.
How do I find my Arris router IP address?
Step 2 – Input the IP Address Input the Arris IP Address “192.168. 100.1” in the address bar and hit on 'Enter' key.
How do I access my router's IP address?
Right-click the Start button then select Command Prompt. Step 2: On the Command Prompt window, enter “ipconfig” and press the [Enter]. The numbers indicated on the Default Gateway section is your router's IP Address.
What is the default username and password for Arris router?
By default, the username is admin, and the password is password. For network security purposes, ARRIS recommends changing the router default admin user name and password after logging onto the SBR-AC1200P for the first time.
How do you find the IP address of a router?
Find Your Router IP Address on AndroidGo to Settings.Tap Wi-Fi Settings.Tap and hold on your connected network and select Manage Network Settings.Check the box next to Show Advanced Options.Select Static under IP Settings.Your router IP address is listed under the Gateway section.
How to enable remote access?
To Enable Remote Access 1 Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear.#N#NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager. There is no risk in proceeding to the Web Manager. For instructions to by-pass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access. 2 On the Login page, enter admin or a customized username in the Username field. 3 Enter password or a customized password in the Password field.#N#NOTE: On later versions of the SBG6700-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom while label. For assistance with Web Manager Access, refer to article # 18754 – SBG6700-AC: Web Manager Access. 4 Click the Login button. The Home page will appear. 5 Move the mouse-cursor over the Advanced tab and select the Options sub-link. The Advanced - Options page will appear. 6 On the Advanced - Options page:#N#a. Check the Remote Config Management option.#N#b. Click the OK button, on the Warning pop-up window.#N#c. Click the Apply button.#N#NOTE 1: A restart is not necessary, as the settings will immediately take effect.#N#NOTE 2: A red warning will inform the user that Remote Management is turned on.
How to log in to a remote location?
From a remote location, launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://Wan IP Address:8080 into the address box, press the Enter key. The Login page will appear.
Summary
This article provides instructions on how to setup your Wireless Network, recommended settings, and how to connect other devices to your wireless network.
Solution
In order to manage and setup your Wireless Network you will need to login into the Web Interface on your Arris Gateway.
Logging into the web interface
Open up a web browser (Internet Explorer, for example) and enter the IP address http://192.168.0.1 in your browser’s address bar and press Enter.
Setting your Wireless Settings
On the first initial page, you will see all of your Wireless settings.
Recommended Wireless Settings
These are settings that are recommended if you are uncertain what settings you should select.
Connecting other devices via Wireless
You can manually enter in the security Passphrase or Network Key. To do this, it will depend on your operating system.
Can you use an outlet timer to turn off the power?
If you want the control to be completely automated (on/off at specific times), you can use an "outlet timer" to cut off the power and turn it back on at whatever times you program. No intervention required.
Can a circuit breaker be used to switch off?
These circuit breakers are not made for often switching, but they wont damage if you turn off power several times until you are not sick any more.
Is it safer to buy Ethernet cable or keep router?
The safer alternative would be to buy a long Ethernet cable and keep the router near you. I imagine this would be more extensive though.
Can you use a circuit breaker on the other floor?
If you have separate fuses for the other floor (which are situated on the first floor) then you can use their circuit breakers to turn off electricity on the other floor.
Can I turn off my router from my phone?
I have a perfect solution for it which I am using in my house to control the room lights and fan. You can use the same to completely switch off the router. You can control your router (Turn ON & Turn OFF) from your phone but this is more related to Electronics which I think you don't want for your problem.
What happens if you change the DNS settings on a router?
What’s interesting is that, by changing the DNS settings on the router, users would actually believe they’ve landed on a legitimate webpage, except that it’s served from a different IP address. For example, when users type “example.com”, instead of the webpage being served from a legitimate IP address, it would be served from an attacker-controlled IP that’s resolved by the malicious DNS settings. If the attacker-controlled webpage is a spot-on facsimile, users would actually believe they’ve landed on a legitimate webpage, jud ging from the domain name in the browser’s address bar.
Do I need to tap into my router?
I highly doubt you’ll need to tap into your router’s settings when you aren’t at home, and remote management opens your device up to plenty of security issues. Consider the latest security warnings from BitDefender. Attackers are allegedly using brute-force techniques to guess their way into less-secure routers with Remote Management enabled—as well, router with any kind of cloud configuration option. Once they’ve done that, they’re messing with the router’s DNS settings to redirect users’ web requests to malware.
Does the average user have looked at their router config menu?
Doesn’t help that the average user has NEVER looked at their router config menu, that the menu probably has a low level interface from 1992, or that if it has been updated it is most likely a kiddy-gate interface blocking a lot of user access.
How to connect to arris wifi?
Connect to your Wifi router. Turn on your wifi router and now plug the network cable between it and Arris at port 1. Now, connect your computer to your router wifi network (and not to Arris wifi).
What is the new IP address for arris?
Now we’ve changed the Arris LAN IP, we need to open again this web interface in our browser, but now at the new IP: http://192.168.1.1 (use the same credentials, user admin and password password ).
How to reset Arris TG862?
If you want to revert all configurations to the previous one (i.e, the one from the ISP), you can reset the Arris TG862 using a pen, pressing the reset button for 30 seconds.
What IP address does my router need?
Your wifi router must be configured with LAN IP 192.168.0.1.
How to enable remote access?
To Enable Remote Access 1 Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear.#N#NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager. There is no risk in proceeding to the Web Manager. For instructions to by-pass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access. 2 On the Login page, enter admin or a customized username in the Username field. 3 Enter password or a customized password in the Password field.#N#NOTE: On later versions of the SBG6700-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom while label. For assistance with Web Manager Access, refer to article # 18754 – SBG6700-AC: Web Manager Access. 4 Click the Login button. The Home page will appear. 5 Move the mouse-cursor over the Advanced tab and select the Options sub-link. The Advanced - Options page will appear. 6 On the Advanced - Options page:#N#a. Check the Remote Config Management option.#N#b. Click the OK button, on the Warning pop-up window.#N#c. Click the Apply button.#N#NOTE 1: A restart is not necessary, as the settings will immediately take effect.#N#NOTE 2: A red warning will inform the user that Remote Management is turned on.
How to log in to a remote location?
From a remote location, launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://Wan IP Address:8080 into the address box, press the Enter key. The Login page will appear.
