As far as I know, currently the answer is No. However, you may try first waking the computer on LAN, then using Remote Desktop to access the sleeping computer. Best Regards
Full Answer
Is the Remote Desktop feature compatible with sleep mode?
The remote desktop feature is compatible with sleep mode in the Apple, Windows 7, Windows 8, and Windows 10 operating systems. A client (desktop) computer must either be on or in sleep mode for remote access to work. In order to wake a computer from sleep mode for a remote desktop session,...
How do I Sleep a remote computer in Windows 10?
Remote Desktop: Sleep remote computer When accessing my computer from Remote Desktop (Windows 10), I can Hibernate the remote computer via the Start > Power > Hibernate. However, if I try Start > Power > Sleepnothing happens.
Is it possible to wake up a computer that is sleeping?
As far as I know, currently the answer is No. However, you may try first waking the computer on LAN, then using Remote Desktop to access the sleeping computer.
How can I hibernate the remote computer?
When accessing my computer from Remote Desktop (Windows 10), I can Hibernate the remote computer via the Start > Power > Hibernate. However, if I try Start > Power > Sleepnothing happens. How can I Sleep the remote computer?
Can you remote access a computer in sleep mode?
The remote desktop feature is compatible with sleep mode in the Apple, Windows 7, Windows 8, and Windows 10 operating systems. A client (desktop) computer must either be on or in sleep mode for remote access to work.
Can you remote access a laptop that is off?
In combination with remote access software, it is a breeze to set up and use, to connect to your remote computer from anywhere even if it is powered off, in hibernation (Windows) or sleep (Mac) mode.
Can I access TeamViewer when computer is sleep?
You can turn on a sleeping or powered-off computer using TeamViewer's Wake-on-LAN feature. This means you can control an offline computer remotely by waking it up first before you establish a connection to it.
Can RDP wake up computer?
Remote Desktop does not have any built-in remote wake-up capability. You will need to first use Wake-On-Lan to wake up the sleeping computer, before you can RDP to it. To enable WOL on your computer, the first step is to check the hardware : Your network card must support Wake-on-LAN.
Does computer need to be on for Remote Desktop?
To connect to a remote PC, that computer must be turned on, it must have a network connection, Remote Desktop must be enabled, you must have network access to the remote computer (this could be through the Internet), and you must have permission to connect. For permission to connect, you must be on the list of users.
Can someone remotely access my computer without my knowledge?
There are two ways someone can access your computer without your consent. Either a family member or work college is physically logging in to your computer or phone when you are not around, or someone is accessing your computer remotely.
Can TeamViewer wake up a remote computer?
You can turn on an offline computer with TeamViewer via Wake-on-LAN. This way, you can control an offline computer remotely by waking it up before you establish a connection.
Can Chrome Remote Desktop wake from sleep?
Can Chrome Remote Desktop wake from sleep? No, it can't. That's one of its main disadvantages compared to other remote desktop software. It's not possible to wake a sleeping computer using Chrome Remote Desktop, so you need to make sure all computers you wish to connect to are awake.
How can I remotely turn on my computer over the Internet?
Set up the PC you want to connect to so it allows remote connections:Make sure you have Windows 10 Pro. ... When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop.Make note of the name of this PC under How to connect to this PC.
How do I keep TeamViewer always on?
To configure TeamViewer to run as a service after installation:In TeamViewer, go to Extras > Options.Click General.Select Start TeamViewer with Windows.When prompted, enter a secure password, confirm, and Click OK.Click OK in the Permanent Access Activated message.
How do I wake my computer from sleep TeamViewer?
0:301:23TeamViewer 9 Features: Wake-on-LAN Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen the power tab and activate the wake up on land option then save and exit the BIOS setup onceMoreOpen the power tab and activate the wake up on land option then save and exit the BIOS setup once the device you want to connect to is in standby sleep or hibernate mode.
How long will TeamViewer stay open?
In July 2021, TeamViewer starts another measure to make sure all affected devices will get an update to the latest version before the final discontinuation of server support for TeamViewer 8-10 on September 15th, 2021.
How do I use TeamViewer unattended access?
Setting up Easy Access is… well, easy. If someone already assigned the device to your TeamViewer account: Click Extras –> Options –> Security –> under Unattended access, activate the checkbox Grant easy access –> click OK.
How to wake up a computer?
On the target computer, i.e. the one to be woken up, open a command line window and enter the command: ipconfig /all
How to enable wake on LAN?
Check whether the network adapter on the target computer supports Wake On LAN. Enable the function in the network adapter settings or in any special management program that came with it. If the network adapter is integrated on the motherboard, enable Wake On LAN in the motherboard BIOS.
What port is used to wake a computer?
The other two fields are filled with 255.255.255.255, and the port is 7 or actually any other port. Port 9 is sometimes used.
Does WakeOnLanGui work on host laptop?
Thanks, WakeOnLanGui really worked on my host laptop! Also needed it to, after waking up, access the notebook over RDP.
How to remotely wake a computer from sleep?
How to Remotely Wake Computer From Sleep and Establish a Remote Connection. 1. Assign your computer a static IP. 2. Configure port forwarding in your router to pass Port 9 to your PC’s new static IP. 3. Turn on WOL (Wake on LAN) in your PC’s BIOS. 4.
What program will send a wake up call to your PC?
You will need to select a Magic Packet sending solution. This is the program that will actually send the “wake up call” to your PC. There are a LOT to choose from. A simple Google search for Magic Packet Sender reveals hundreds of choices. There are even web-based solutions that will send a Magic Packet from a web site. I leave it to you to decide which one is best as they all basically accomplish the same goal.
Why do I need to turn on WOL on my motherboard?
Some (not all) Motherboard BIOS require WOL to be turned on in order to permit the PC to be waken remotely. More modern motherboards with UEFI will likely have this enabled by default but older boards generally do not. I recommend you access your motherboard’s BIOS/UEFI to ensure WOL capabilities are enabled. Access to your BIOS/UEFI varies from manufacturer to manufacturer. After a restart you can try pressing F1, F2, TAB, Del, Esc. If in doubt consult your motherboard’s documentation.
What port does my router need to wake up?
Your computer needs to be able to receive a Magic Packet on Port 9 in order to wake up. To do this, your router has to be configured to always forward Magic Packets (on Port 9) to your computer. In order to do this your computer needs to always have the same IP address.
How to see if you have a wireless adapter?
If you are hard-wired you will see a LAN adapter, and if you are using wireless you will see a wireless adapter. Choose the appropriate adapter and right-click to select status.
How to get to my network and sharing center?
Right click on your network connection in the bottom right corner and open the Network and Sharing Center. (XP users can alternatively right click on My Network Places and click properties)
How to access Device Manager?
You can access the device manager by right-clicking Computer and selecting Manage and then Device Manager on the left. Alternatively you can open a run command (Windows Key+ R) and type devmgmt.msc. You should know see a list of all your computer’s devices: Device Manager.
What is TeamViewer remote access?
Flexible and scalable, the TeamViewer remote access and support platform is the foundation of our suite of software solutions, with countless use cases and prebuilt integrations with popular IT and business applications.
Why do we wake up on LAN?
Wake-on-LAN also ensures that fewer people are required to fulfil tasks: computers can be completely unattended before you connect, meaning no member of staff needs to be onsite to interact with the device for you. Companies that trust TeamViewer.
What is a wake on LAN?
With the Wake-on-LAN feature from TeamViewer, you can remotely access and control devices no matter whether they’re switched on or off. This not only provides great flexibility in terms of 24/7 access to devices and resources, it can also improve energy efficiency since devices can be turned off when not in use.
What port does Wake on LAN use?
Wake-on-LAN uses a UDP (User Datagram Protocol) port. Many utilities use ports 7 or 9, but you can use any port you like for WoL. The UDP port needs to be forwarded to all IP addresses behind your router—it’s not possible to forward it to a specific IP address.
Can you use TeamViewer on a smartphone?
TeamViewer’s AR functionality can easily be used via a smartphone camera.
Can you see what is happening on a remote computer?
You can see at first glance what is happening on the remote computer.
Can you wake up TeamViewer from another computer?
The first method simply requires you to configure the hardware of the target computer and configure TeamViewer on it in order wake it up from another device connected on the network .
How to wake up a PC remotely?
In order to remotely wake your PC, you must provide your PC a static IP address. There are many ways to know your current IP address which we are going to check in this. Providing a Static IP is another best way to awakening your PC. As your router may allow your device different IP address periodically.
What is the best app to manage your computer remotely?
LogMeIn is another best app to manage your computer remotely. You can keep your work productive from around the globe with LogMeIn. This is light in weight and easy to use. For easy handling and keeping eye on your device, you can use it on your Smartphone also.
How to wake up a server?
Go to Computer & Contacts list, sign up and select the server you are having connection and tap on Wake up option.
What app to use to wake up a PC?
Now you are ready to set up WoLAN. Here we suggest you use the third-party app called TeamViewer. This app offers a free download that wakes up your PC from Standby, a Sleep mode or a Hibernate mode. This is the simplest option as we have compared from all other utility applications.
Can you remotely wake your PC?
Now again you can remotely wake your PC using TeamViewer application.
