Symptoms On a computer that is running Windows 7 or Windows Server 2008 R2, the Routing and Remote Access service (RRAS) does not start when there is no network connectivity. For example, RRAS does not start when all wired network connectivity is un-plugged or when wireless connectivity is shut off.
Full Answer
What happens when Windows 7 routing and remote access fails to start?
If Routing and Remote Access fails to start, Windows 7 attempts to write the failure details into Event Log. Then Windows 7 startup should proceed and the user should be notified that the RemoteAccess service is not running because of the error.
What is routing and remote access?
On a Windows system, the Routing and Remote Access service (RRAS - service name: RemoteAccess) doesn't start when there's no network connectivity. For example, RemoteAccess doesn't start when all wired network connectivity is unplugged or when wireless connectivity is shut off.
How to configure remote access connection manager to start automatically?
Right-click Remote Access Connection Manager service and then click Properties. d. On the General tab, click Manual next to Startup type. e. On the General tab, click Start under Service status, and then click OK. f. Also check for the Dependency services. The following are the dependency services of "Remote Access Connection Manager":
How to fix remote access not working on Windows 7?
Close the command window and restart the computer. The RemoteAccess service is using the mprdim.dll file that is located in the %WinDir%\System32 folder. If the file is changed, damaged or deleted, you can restore its original version from Windows 7 installation media.
How do I open Routing and Remote Access in Windows 7?
Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN) to permit remote computers to dial in or connect to this network through the Internet.
How do I restart Routing and Remote Access Service?
To ensure that the service is running, type Get-Service iphlpsvc at a Windows PowerShell prompt. To enable the service, type Start-Service iphlpsvc from an elevated Windows PowerShell prompt. To restart the service, type Restart-Service iphlpsvc from an elevated Windows PowerShell prompt.
How do I install Remote Access and Routing?
ProcedureOpen the Windows Server 2012 Server Manager.From the Server Manager Dashboard, select Manage > Add Roles and Features.Click Next to display the Select Server Roles window.Select the Remote Access check box. ... Click Next until the Select Role Services page is displayed.Select Routing.More items...
How do I start a remote access service?
Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I reset my Ras tool?
How to restart RAS serviceOpen the Services app, click Start and type Services.Find Remote Access Connection Manager.Right-click and choose Restart.
How do I restart Terminal Services without rebooting?
If you don't have access to the Services console on the Windows server, you can restart it via Task Manager.Log in to your Windows VPS.Right-click on your VPS taskbar and click on the Task Manager.Please search for the term service and right-click on it. Here, you will see an option to restart the service.
How do I enable NAT on Windows?
Right-click the server, and select Configure and Enable Routing and Remote Access.When the wizard opens, click Next.Select Network address translation (NAT) and click Next.Select the network interface that your users will use to connect to the internet, and then click Next.More items...
What is Windows Routing and Remote Access?
RRAS is a software router and an open platform for routing and networking. It offers routing services to businesses in local area network (LAN) and wide area network (WAN) environments or over the Internet by using secure VPN connections.
How do I set up my RAS?
To install the Remote Access role on DirectAccess servers Click Next three times. On the Select role services dialog, select DirectAccess and VPN (RAS) and then click Add Features. Select Routing, select Web Application Proxy, click Add Features, and then click Next. Click Next, and then click Install.
How do I setup Remote Desktop on Windows 7?
Remote Desktop: Connect to Another Computer (Windows 7)Open the Control Panel: Start | Control Panel.Click System and Security.Click Allow Remote Access.Under the Remote Tab: ... Click Select Users. ... Under the Computer Name Tab: Make a note of the [Full Computer Name].
How do I restart a remote server?
using COMMAND LineLogin with a full administrative account to another computer.Open a Command Prompt (CMD) window.Type the following command:Example 1: Restart a remote server.Shutdown /m \\servername /r.Example 2: Restart a remote server immediately.Shutdown /r /m \\servername /t 0.More items...
How do I know if Remote Desktop is enabled?
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services. If the value of the fDenyTSConnections key is 0, then RDP is enabled. If the value of the fDenyTSConnections key is 1, then RDP is disabled.
What is the use of routing and remote access service?
RRAS is a software router and an open platform for routing and networking. It offers routing services to businesses in local area network (LAN) and wide area network (WAN) environments or over the Internet by using secure VPN connections.
How do I install Remote Access and routing in Windows 2016?
Steps: Enable routing on Microsoft Windows Server 2016 In Routing and Remote Access, right-click the server, and select Configure and Enable Routing and Remote Access. When the setup wizard launches, click Next. Select Custom configuration and click Next. Select LAN routing and click Next.
What is Remote Access control?
Remote access control refers to the ability to monitor and control access to a computer or network (such as a home computer or office network computer) anywhere and anytime. Employees can leverage this ability to work remotely away from the office while retaining access to a distant computer or network.
How do I remotely access another computer from intranet?
Setting up remote access is only necessary when attempting to use Remote Desktop Connection from outside of your LAN. In order to connect remotely, port 3389 must be open on your router. The host computer must be turned on, and have Remote Desktop enabled.
Symptoms
On a computer that is running Windows 7 or Windows Server 2008 R2, the Routing and Remote Access service (RRAS) does not start when there is no network connectivity.
Cause
When RRAS starts, it tries to initialize certain functions in Internet Authentication Service (IAS) for authentication. The IAS initialization fails when there is no network connectivity. Therefore, RRAS does not start. On Windows 7 and on Windows Server 2008 R2, IAS initialization failure is by design when there is no network connectivity.
Workaround
To start RRAS in order to create a new incoming connection, your computer needs to be connected to a network.
Default Behavior
Routing and Remote Access is a Win32 service. In Windows 7 it is disabled and therefore it isn't starting. When the Routing and Remote Access service is started, it is running as localSystem in a shared process of svchost.exe. Other system components, such as drivers and services, may run in the same process.
Dependencies
Routing and Remote Access is unable to start, if at least one of the following services is stopped or disabled:
Restore Default Startup Configuration for Routing and Remote Access
Before you begin doing this, make sure that all the services on which Routing and Remote Access depends are configured by default and function properly. See the list of dependencies above.
Question
Okay we have some serious problem here with starting the Routing and Remote acces service on Windows 2008 SBS server,
All replies
Whatever else, please put back the IPv6. Contrary to what you may find when searching for fixes, deleting/removing IPv6 is NOT recommended, and in fact may break more things. See the blog post on issues after disabling IPv6 which also address the proper steps for disabling IPv6 if it's necessary.
