What can I do with cayenne portal?
Remotely monitor live data from sensors and actuator. Control your sensors/actuator with dashboard GPIO. Best thing is that for you Automation Projects you can make the trigger and add the schedule. Cayenne did not release stable version of portal yet for Arduino, currently Cayenne Arduino in Beta but available for Raspberry Pi.
What are the use of the custom widgets in Cayenne?
Widgets are used to visualize devices data, status, and actions. Every device, sensor and actuator that is added in Cayenne has one or more widgets associated depending on the hardware capabilities.
How to use cayenne for Remote Desktop?
Simply allow cayenne.mydevices to open new tabs. 4. Once done you can control your Pi like as if you were there with it. 5. One of the pros of using Cayenne for remote desktop is that you can access it anywhere in the world quite easily rather than needing to set up a VPN or open up ports on your network.
What is the difference between Cayenne app and online dashboard?
Cayenne App is used to remotely control your IoT projects with drag and drop widgets from an app. Cayenne Online Dashboard is used to setup and manage our IoT projects with the help of the browser.
What is Cayenne MQTT?
The Cayenne MQTT API is used to connect any device that you have with the Cayenne Cloud. After connecting your device you can send data from your device to the Cayenne dashboard and display it using widgets. You may also receive commands from Cayenne, allowing remote control and automation of your devices.
What is Cayenne myDevices?
Cayenne is a drag-and-drop IoT platform, developed by myDevices, that empowers users to quickly prototype and share their connected IoT solutions.
How do you use a cayenne dashboard?
0:010:51Create a Custom Dashboard Using Raspberry Pi and Arduino - YouTubeYouTubeStart of suggested clipEnd of suggested clipWelcome to Cayenne IOT project builder where you can create a dashboard containing multiple sensorsMoreWelcome to Cayenne IOT project builder where you can create a dashboard containing multiple sensors and actuators. From multiple devices let's get started I add my first project.
How does cayenne IoT work?
The Cayenne cloud processes and stores user and sensor data from the device, while the online dashboard provides a graphical environment for working with your IoT project, as well as monitoring and managing the Rasp Pi. Finally, the Cayenne app for Android and iOS is used to set up and manage Cayenne on the Rasp Pi.
Is myDevices Cayenne free?
Hello Sir, right now, Cayenne is free. Just to add a bit to what @ognqn. chikov has said, we intend for Cayenne to remain free in the future for makers and hobbyists like most of us on this community.
What does myDevices do?
myDevices, the IoT Solutions company, empowers System Integrators, MSPs, ISVs, VARS, and enterprise customers to quickly deploy IoT solutions to their customers.
What is Cayenne dashboard?
The Cayenne dashboard is the main screen where you can setup, customize, monitor, manage and control your connected devices. From the Cayenne dashboard you can: Add Raspberry Pis, Arduino boards, LoRa devices, sensors, actuators and extensions. Fully customize your dashboard with drag-and-drop widgets.
What is a Cayenne dashboard and how it works with the Raspberry Pi?
Cayenne is an app for smartphones and computers that allows you to control the Raspberry Pi and soon also the Arduino through the use of an elegant graphical interface and a solid nice communication protocol. The features are: Add and remotely control sensors, motors, actuators, GPIO boards, and more.
Is Cayenne IoT free?
Cayenne is a free drag-and-drop IoT project builder for Raspberry Pi and Arduino. Sign up free at www.Cayenne-myDevices.com.
What is Cayenne app?
The Cayenne phone app is available for Android and iPhone so you can monitor and control your dashboard and projects on the go.Remote Monitoring - Developer | myDevices.com - Cayennehttps://developers.mydevices.com › cayenne › features › r...https://developers.mydevices.com › cayenne › features › r...Search for: What is Cayenne app?
What is Cayenne for Raspberry Pi?
The Cayenne is a mobile app and web platform that enable the users to step into the world of IoT projects. Once you have managed to set it up for your Raspberry Pi device, you can then be able to create numerous IoT projects offered in the Cayenne menu.How to Setup Cayenne on Raspberry Pi - Linux Hinthttps://linuxhint.com › setup-cayenne-raspberry-pihttps://linuxhint.com › setup-cayenne-raspberry-piSearch for: What is Cayenne for Raspberry Pi?
What are triggers in Cayenne?
Triggers in Cayenne are a way to have your Pi react to a certain change on the Pi itself or through a sensor attached to it.
How long does it take to install Cayenne on a Pi?
(Keep in mind SSH needs to be enabled) 3. It will take a few minutes to install onto your Pi depending on how fast your internet connection is.
What is GPIO panel?
GPIO Panel. The GPIO panel within Raspberry Pi Cayenne allows you to control and alter the pins on the Pi. For example, you can turn a pin from being input to an output and vice versa. You can also turn output pins both low & high.
What can you see on a pin?
You can also see the devices that are currently assigned to specific pins. You’re also able to see the current status of a pin. (e.g. Input or output & low or high)
Can you use Cayenne for remote desktop?
5. One of the pros of using Cayenne for remote desktop is that you can access it anywhere in the world quite easily rather than needing to set up a VPN or open up ports on your network.
Can you install Cayenne on Raspberry Pi?
The process of installing Cayenne onto the Raspberry Pi is pretty simple and shouldn’t take you too long to get it up and running. You will need to make sure you have Raspbian installed on your Pi. If you’re unsure how to do this, then be sure to check out my tutorial on setting up Raspbian.
Temperature and Humidity monitoring with ESP32 – Connection description
Connect the DHTxx QuickInsert board to the available bus in the IoT board. By this connection, we will get the Power for the DHTxx QuickInsert board and the connection between the ESP32 module ( GPIO32 ).
Program description
First, include the required libraries and then define the Pin number and DHT sensor model
Configuration of Cayenne Arduino for Home Automation
Cayenne is IoT based dashboard so you need hardware which can be connected to the internet for this purpose you need Arduino WiFi or Ethernet Shield. The important thing is how to configure Cayenne IoT dashboard for Arduino I make this guide step by step to understand easily who not know much about IoT but want to learn.
Step 1
First of all, you need a working internet connection then Create a free account on Cayenne.
Step 2
After completion of creating the account you have to choose Arduino OR Raspberry Pi board, I choose Arduino because in this project we are using Arduino for this project.
Step 3
After this now in step 3 we have to work on Arduino side first thing you need Arduino IDE latest version installed on the computer if you do not have then download it from here and you also need to install Cayenne Library for Arduino . If you don’t know how to install the library on Arduino IDE don’t worry read below.
Step 4
Back to Cayenne Dashboard Select your board and Shield after that, a popup appear with Code for Arduino copy it and upload it to your board with Arduino IDE tool.
Cayenne Arduino IOT Dashboard Settings
Now you have to add Sensors/Actuators. first, create project give any name to it now you have to add sensors/actuators according to your project. In this project, I used LDR sensor to control garden lights and water tank motor with the relay module.
Features of Cayenne IoT Cloud Platform
Cayenne App is used to remotely control your IoT projects with drag and drop widgets from an app.
Setup Cayenne Dashboard for ESP8266
If you do not have an account on Cayenne, create an account from the following link: https://cayenne.mydevices.com/cayenne/signup
Programming Code Explanation
The complete code for controlling LED using ESP8266 and Cayenne is given at the end. Start the code with defining all the required libraries.
Testing LED Control by Cayenne Dashboard using ESP8266
Compile and upload the complete code, and after uploading open the cayenne dashboard.
Testing LED Control by Cayenne App using ESP8266
The same we can do with our smartphone, all we have to do is download the Cayenne app from play store and log in.
Developer's Description
Start your next Raspberry Pi project or prototype right from your phone with Cayenne IoT project builder. Download Cayenne straight to your iPhone and start your project in a fraction of the time. You can add, manage and control all sorts of sensors and actuators from your phones dashboard with drag and drop widgets.
Full Specifications
Version 1.2 Release Notes Scheduling feature implemented Improvements for automatically discovering the Pi through WiFi network Fix for deleting widgets from the iOS app Minor visual bug fixes Servo widget fixes Fixes for iOS app crashing Updates to History Graph widget When deleting a widget from the iOS app, the same widget may not be deleted on the web dashboard.