What is a cgnm 2250 used for?
CGNM-2250 Overview Your CGNM-2250 is a NAT-capable cable modem and wireless access point that allows you to connect your computers, wireless devices, and other network devices to one another, and to the Internet via the cable connection.
How do I set the cgnm-2250 to restrict access to certain devices?
The Device Filter Screen on page 100. You can set the CGNM-2250 to allow only certain devices to access the CGNM-2250 and the network wirelessly, or to deny certain devices access. Click Wireless > Access Control. The following screen displays.
How do I Reset my cgnm 2250?
To do this on (most) Windows machines, click Start> Run, enter “cmd”, and then enter “ipconfig”. Get the IP address of the Default Gateway, and enter it in your browser’s address bar. 4 If you still cannot access the CGNM-2250, you need to reset the CGNM-2250.
How to login to CGNM-2250?
How to allow all devices to connect to CGNM-2250?
What is the success screen on a Hitron CGNM-2250?
How to add a managed device to Hitron CGNM-2250?
How does a Hitron CGNM-2250 work?
What is CGNM 2250 routing mode?
What is the setup wizard on a CGNM-2250?
See 2 more
About this website
How do I connect to CGNM-2250?
Type 192.168. 0.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Hitron CGNM-2250 is cusadmin.
Is the Hitron CGNM-2250 a modem and router?
CGNM-2250 Cable Modem Router - Hitron Americas.
How do I manage devices on my Hitron router?
If you need to make changes to any devices (Connected or Manually added) you can do so easily by using the Manage button under the Action column in both the Connected Devices and Managed Device sections. You can adjust device-specific settings and click apply to save your changes.
How do I log into my Hitron router?
Login InstructionsIn the address bar, type in the following: 192.168. 0.1 and press the enter key on your keyboard.You will be presented with a Hitron login page.Login with your credentials: Hitron CGNM-2250. Username: cusadmin. ... Select the Login button.
Does Hitron router support VPN?
Yes, works fine on one PC but would like all devices to use the VPN through the Hitron CGN3.
Where is the security key on a Hitron router?
Connecting your device to WiFi If you are connecting your devices via WiFi, start by locating the SSID (network name) and WiFi Key (password) for your Hitron modem and connect to that network on your device. Your SSID and WiFi Security Key can be found printed on the white sticker located on the modem.
How do I block devices connected to my WiFi hitron?
Re: Hitron CODA 4582 Device Filtering Log into router. Select "Security" tab. Select "Device Filter" Assuming that the device that you want to block is connected to the internet, click the blue "Show" box beside "Connected Devices" Click "Manage" to the right of the device you want to block.More items...•
What is WiFi parental control?
This means you can schedule the network to turn off at a certain time every day. Some include scheduling for specific devices, so you can choose your child's laptop, tablet or gaming console and disconnect it from the internet at, say, 8 p.m. every weeknight.
What is a coda 4589?
The CODA-4589 integrates a 2 Voice Ports and a DOCSIS 3.1 modem with 3x3 2.4GHz 802.11n and 4x4 802.11ac 5GHz WiFi Wave 2, significantly improving the customer experience by extending the WiFi range and coverage with blazing fast speeds.
Why can't I log into my Hitron router?
You could try a hard reset on the device (hold the reset in for a good 10+ seconds). Or you can call into tech support, they should be able to log in via their login into the device, and reset the password for you.
What is IP passthrough?
IP Passthrough is a setting where your modem is handing off the usable static IP to another piece of equipment. This mode will also allow Windstream to support the Windstream equipment while allowing you to configure your own equipment as needed.
What is Hitron username and password?
Hitron Router Login Guide The default username for your Hitron router is cusadmin. The default password is password. Enter the username & password, hit "Enter" and now you should see the control panel of your router.
How do I reset my Hitron admin password?
Set a new password Enter the username "cusadmin" (lowercase). Enter the current password (case sensitive) found on the white sticker on your modem. Click Wireless at the top of the page. Click 2.4G, 5G, or Guest network at the top of the page, to select a network to change the password for.
How do I log into my Hitron coda 4589?
Hitron - CODA-4589 Router Login - Username, Password and IP AddressUsername: cusadmin.Password: password.IP Address: 192.168.0.1 Login.SSID: CODA-XXXX, CODA-XXXX-5G.
How do I log into my Hitron coda 4582?
Sign in using the following credentials: Username: Cusadmin. Password: password (or your easy connect WiFi password)
How do you find the IP address of a router?
Find Your Router IP Address on AndroidGo to Settings.Tap Wi-Fi Settings.Tap and hold on your connected network and select Manage Network Settings.Check the box next to Show Advanced Options.Select Static under IP Settings.Your router IP address is listed under the Gateway section.
What is the IP address of a CGNM-2250?
If your CGNM-2250 is using the default IP address, you should set your computer’s IP address to be between 192.168.0.2 and 192.168.0.254.
What is a CGNM-2250?
Your CGNM-2250 is a NAT-capable cable modem and wireless access point that allows you to connect your computers, wireless devices, and other network devices to one another, and to the Internet via the cable connection.
How to reset a CGNM-2250?
Reset Use this button to reboot or reset your CGNM-2250. Press the button and hold it for less than five seconds to reboot the CGNM-2250. The CGNM-2250 restarts, using your existing settings. Press the button and hold it for more than five seconds to delete all user-configured settings and restart the CGNM-2250 using its factory default settings. See Factory Default Resetting the CGNM- 2250 on page 24 for more information on resetting the CGNM-2250. NOTE: Unless you previously backed-up the CGNM- 2250’s configuration settings prior to resetting the CGNM-2250, the settings cannot be recovered.
Can you connect a CGNM-2250 to a LAN?
However, it is strongly recommended that you configure the CGNM-2250 via a wired connection on the LAN.
Can CGNM-2250 be mounted vertically?
The CGNM-2250 must be placed vertically on its stand, should not be positioned in either wall-mount or horizontal.
Does the CGNM-2250 have a DHCP server?
NOTE: See IP Addresses and Subnets on page 33 for background information. The CGNM-2250 has a built-in DHCP server that, when active, assigns IP addresses to computers on the LAN. When the DHCP server is active, you can get an IP address automatically. The DHCP server is active by default.
What is a CGNM-2250?
The Hitron CGNM-2250 Shaw wireless (WiFi) modem allows you to create custom parental controls to limit access to any part of the Internet you wish. With the ability to manage multiple user access levels, the Shaw wireless modem offers a comprehensive platform for keeping your family safe.
How to apply parental control restrictions?
Click and choose the day (s) where you want to apply parental control restrictions. Red days mean the rule is active and Internet access will be blocked. Green days mean the rule is not active and the Internet will be accessible. Once you have entered all required settings, click Apply. (Click to enlarge) (Click to enlarge) ...
What is allow listed?
Allow Listed: This allows all listed (manually added) devices access (regardless of the previous set day (s) or time (s) where restrictions may or may not apply).
About IP Passthrough
To use IP Passthrough, you'll need to ensure that you have a second dynamic IP address available for your modem. The automatic availability of multiple dynamic addresses is dependent upon your Internet service package.
How to enable IP Passthrough
Note: It is recommended to not connect your 3rd party router or access point until after IP Passthrough has been set up in the Shaw Modem. If the 3rd party device is connected prior to setting up IP Passthrough then you may be required to powercycle to complete the process.
How to allow forwarded ports on Synology router?
If the firewall is enabled on your Synology Router, go to Network Center > Security > Firewall, and create firewall rules to allow the forwarded public ports (ports 443 and 7001 in this example) to be accessed over the Internet. For detailed instructions on firewall configurations, refer to this article.
What ports does Synology use?
Synology Photo Station uses the ports 80 ( HTTP) and 443 ( HTTPS) by default. For more information on customized ports for Photo Station, please check out this article.
How to set up port forwarding rules in SRM?
Set up port forwarding rules on SRM. Go to SRM > Network Center > Port Forwarding. Under the Port Forwarding tab, click Create. In the pop-up window, fill in the fields accordingly, and then click Create to finish. Click Save to apply settings. 4 5.
Can you access Synology NAS via IPv4?
In an IPv4 environment, your Synology NAS and other devices are usually assigned virtual IP addresses within a local area network. Such virtual IP addresses cannot be accessed directly over the Internet. Any packets sent to terminal devices, such as your Synology Router, must be forwarded from the Internet by the router/gateway in your home or office. This article will give you a brief introduction on port forwarding and guide you through the setup of port forwarding rules on Synology Router Manager (SRM).
Do you have to use the same port for both Synology NAS?
However, do not assign the same port for both Synology NAS. After setting up the port forwarding rules, you can access website services hosted by the two Synology NAS via the same public IP address and attached using different port numbers: 6. Web server of Synology NAS 1: https:// Public IP address of NAS : 443.
Can you use Synology NAS for more than one service?
Synology MailPlus, Surveillance Station, DSM desktop, etc.), you may need to set up different port forwarding rules depending on the IP ranges defined for certain services. 1. For example, suppose you have set up a Synology NAS behind your router ...
How to login to CGNM-2250?
You can login into the CGNM-2250’s GUI via the wireless interface. However, it is strongly recommended that you configure the CGNM-2250 via a wired connection on the LAN. Open a browser window. Enter the CGNM-2250’s IP address (default 192.168.0.1) in the URL bar. The Login screen displays. Figure 5: Login Enter the Username and Password.
How to allow all devices to connect to CGNM-2250?
Use these buttons to control the action to be taken for the devices listed: Select Allow All to ignore the Managed Devices list and let all devices connect to the CGNM-2250. Select Allow to permit only devices you added to the Managed Devices list to access the CGNM- 2250 and the network.
What is the success screen on a Hitron CGNM-2250?
Hitron CGNM-2250 User’s Guide Success displays when the CGNM-2250 has completed a connection step. The DOCSIS WAN Screen Use this screen to discover information about: The nature of the upstream and downstream connection between the CGNM- 2250 and the device to which it is connected through the CABLE interface.
How to add a managed device to Hitron CGNM-2250?
Hitron CGNM-2250 User’s Guide 5.3.1 Adding or Editing a Managed Device To add a new managed device, click Add Managed Device in the Wireless > Access Control screen. To edit an existing managed device, locate the device in the Wireless > Access Control screen and click its Manage button.
How does a Hitron CGNM-2250 work?
Hitron CGNM-2250 User’s Guide Table 20: The Basic: Port Triggering Screen (continued) Twoway Status Usually a port triggering rule works for two IP addresses; when a rule is enabled, other IPs will also be allowed to use the rule as a trigger.
What is CGNM 2250 routing mode?
3.1.6 Routing Mode When your CGNM-2250 is in routing mode, it acts as a gateway for computers on the LAN to access the Internet. The service provider assigns an IP address to the CGNM-2250 on the WAN, and all traffic for LAN computers is sent to that IP address.
What is the setup wizard on a CGNM-2250?
The Summary Screen on page Setup Wizard Overview Your CGNM-2250 possess a setup wizard that allows you to rapidly configure its most important settings, including password and wireless settings. The Setup Wizard Screen This section describes the CGNM-2250’s Setup Wizard Screen.
