cisco asa 5505 vpn configuration remote access

Configuration of remote-access connectivity consists of two phases. in the first phase, you configure your resilient internet-edge appliance pair to receive VPN connections from teleworkers’ Cisco ASA 5505 appliances. in the second phase, you deploy configuration on the teleworkers’ Cisco ASA 5505 hardware clients.

Full Answer

Why Cisco ASA 5505 is used as border firewall?

A very popular scenario for small networks is to have a Cisco ASA 5505 as border firewall connecting the LAN to the Internet. Administrators in such networks are usually encountered with requests from their users that are not very security conscious.

Can a DMZ VLAN be created on a Cisco ASA 5505?

However, companies with limited budget might have purchased a Cisco ASA 5505 with basic license which restricts the creation of a DMZ Vlan (although you can create 3 Vlans, the third Vlan can only communicate with one of the other two Vlans but not both).

What are remote access VPNs?

Remote access VPNs allow users to connect to a central site through a secure connection over a TCP/IP network such as the Internet. The Internet Security Association and Key Management Protocol, also called IKE, is the negotiation protocol that lets the IPsec client on the remote PC and the ASA agree on how to build an IPsec Security Association.

Why is the outside IP of Asa not fixed?

So the outside IP of the ASA is not fixed. Therefore, we will configure static NAT with port redirection using the outside interface. Since the outside address is dynamic, you can use a service such as DynDNS to get a fixed domain name irrespective of the IP mapped with it.

How do I access my Cisco ASA remotely?

There are eight basic steps in setting up remote access for users with the Cisco ASA.Configure an Identity Certificate.Upload the SSL VPN Client Image to the ASA.Enable AnyConnect VPN Access.Create a Group Policy.Configure Access List Bypass.Create a Connection Profile and Tunnel Group.Configure NAT Exemption.More items...•

What is remote access VPN Cisco?

Remote access VPNs allow users to connect to a central site through a secure connection over a TCP/IP network such as the Internet. Remote access VPNs for IPsec IKEv2. 8.4(1) Added IPsec IKEv2 support for the AnyConnect Secure Mobility Client.

How do I enable VPN on ASA?

Set up VPN on a Cisco ASA deviceOpen ASDM.Go to Wizards VPN Wizards. IPsec (IKEv1) Remote Access VPN Wizard.Bypass the interface access lists: ... Click Next.Choose Microsoft Windows client using L2TP over IPsec and check the box for MS-CHAP-V2.Click Next.Authenticate the machine: ... Click Next.More items...

How do I configure AnyConnect on ASA 5505?

Quick guide: AnyConnect Client VPN on Cisco ASA 5505Click on Configuration at the top and then select Remote Access VPN.Click on Certificate Management and then click on Identity Certificates.Click Add and then Add a new identity certificate.Click New and enter a name for your new key pair (ex: VPN)More items...•

How do I setup remote access to VPN?

Configure Remote Access as a VPN ServerOn the VPN server, in Server Manager, select the Notifications flag.In the Tasks menu, select Open the Getting Started Wizard. ... Select Deploy VPN only. ... Right-click the VPN server, then select Configure and Enable Routing and Remote Access.More items...•

How does VPN remote access work?

The remote access VPN does this by creating a tunnel between an organization's network and a remote user that is “virtually private,” even though the user may be in a public location. This is because the traffic is encrypted, which makes it unintelligible to any eavesdropper.

How is Cisco VPN configured?

Steps for setting up a VPNStep 1: Line up key VPN components. ... Step 2: Prep devices. ... Step 3: Download and install VPN clients. ... Step 4: Find a setup tutorial. ... Step 5: Log in to the VPN. ... Step 6: Choose VPN protocols. ... Step 7: Troubleshoot. ... Step 8: Fine-tune the connection.

How do I configure IPSec on ASA firewall?

To configure the IPSec VPN tunnel on Cisco ASA 55xx:Configure IKE. Establish a policy for the supported ISAKMP encryption, authentication Diffie-Hellman, lifetime, and key parameters. ... Create the Access Control List (ACL) ... Configure IPSec. ... Configure the Port Filter. ... Configure Network Address Translation (NAT)

How do I setup a Cisco VPN?

InstallUninstall any previous versions of Cisco AnyConnect.Install Cisco AnyConnect app from the Apple App Store or Google Play Store.Open the Cisco AnyConnect app.Select Add VPN Connection.Enter a Description, for example, CMU VPN and the Server Address vpn.cmu.edu.If prompted, allow the changes.Click Save.

Is Cisco AnyConnect SSL or IPsec?

Anyconnect is the replacement for the old Cisco VPN client and supports SSL and IKEv2 IPsec. When it comes to SSL, the ASA offers two SSL VPN modes: Clientless WebVPN.

How does Cisco AnyConnect VPN client work?

When a user opens a VPN session using Cisco AnyConnect, the AnyConnect client connects to the adaptive security appliance using SSL. The client authenticates with the adaptive security appliance and is assigned an internal IP address on the network.

How do I add an XML profile to Cisco AnyConnect?

Navigate to Configuration > Remote Access VPN > Network (Client) Access > AnyConnect Client Profile. Choose Add. Give the profile a name. Choose the Umbrella Security Roaming Client type from the Profile Usage drop-down list.

What is the difference between remote access and a VPN?

A VPN is a smaller private network that runs on top of a larger public network, while Remote Desktop is a type of software that allows users to remotely control a computer. 2. Remote Desktop allows access and control to a specific computer, while VPN only allows access to shared network resources.

What is the difference between site-to-site VPN and remote access VPN?

A remote access VPN connects remote users from any location to a corporate network. A site-to-site VPN, meanwhile, connects individual networks to each other.

How does Cisco AnyConnect VPN Work?

Remote and mobile users use the Cisco AnyConnect Secure VPN client to establish VPN sessions with the adaptive security appliance. The adaptive security appliance sends web traffic to the Web Security appliance along with information identifying the user by IP address and user name.

What are the two types of VPN connections?

Types of VPNsSite-to-Site VPN: A site-to-site VPN is designed to securely connect two geographically-distributed sites. ... Remote Access VPN: A remote access VPN is designed to link remote users securely to a corporate network.More items...

What is Cisco ASA 5505?

The Cisco ASA 5505, operating as an Easy VPN hardware client, supports management access using SSH or HTTPS, with or without a second layer of additional encryption. You can configure the Cisco ASA 5505 to require IPsec encryption within the SSH or HTTPS encryption.

Which interface has the highest security level?

In this scenario, the security appliance builds the tunnel only for vlan1, the interface with the highest security level. If you want to encrypt traffic from vlan12, you must change the security level of interface vlan1 to a lower value than that of vlan 12.

Can Cisco ASA 5505 be used as a VPN?

When configuring the Cisco ASA 5505 as an Easy VPN hardware client, you can specify a tunnel group or trustpoint configured on the Easy VPN server, depending on the Easy VPN server configuration. See the section that names the option you want to use:

Does Easy VPN use UDP?

By default, the Easy VPN hardware client and server encapsulate IPsec in User Datagram Protocol (UDP) packets. Some environments, such as those with certain firewall rules, or NAT and PAT devices, prohibit UDP. To use standard Encapsulating Security Protocol (ESP, Protocol 50) or Internet Key Exchange (IKE, UDP 500) in such environments, you must configure the client and the server to encapsulate IPsec within TCP packets to enable secure tunneling. If your environment allows UDP, however, configuring IPsec over TCP adds unnecessary overhead.

Can Cisco devices be used for authentication?

Devices such as Cisco IP phones, wireless access points, and printers are incapable of performing authentication . Enter the following command in global configuration mode to exempt such devices from authentication, thereby providing network access to them, if individual user authentication is enabled:

What is ASA 5505?

A very popular scenario for small networks is to have a Cisco ASA 5505 as border firewall connecting the LAN to the Internet. Administrators in such networks are usually encountered with requests from their users that are not very security conscious.

Can a remote desktop be attacked by a password?

Remote Desktop machines are very prone to attacks, especially brute- force password attacks. In windows, the administrator account does not get locked-out by default. So a brute force administrator password attack on the RDP server from remote attackers can be successful especially if the administrator password is weak.

Is the IP address of an ASA fixed?

Assume that the ASA receives IP address dynamically from the ISP (via DHCP protocol). So the outside IP of the ASA is not fixed.

Can you create 3 DMZ vlans?

However, companies with limited budget might have purchased a Cisco ASA 5505 with basic license which restricts the creation of a DMZ Vlan (although you can create 3 Vlans, the third Vlan can only communicate with one of the other two Vlans but not both).

How many interfaces does an ASA have?

An ASA has at least two interfaces, referred to here as outside and inside. Typically, the outside interface is connected to the public Internet, while the inside interface is connected to a private network and is protected from public access.

What is the default LAN to LAN tunnel group?

There are two default tunnel groups in the ASA system: DefaultRAGroup, which is the default remote-access tunnel group, and DefaultL2Lgroup, which is the default LAN-to-LAN tunnel group. You can change them but not delete them. The ASA uses these groups to configure default tunnel parameters for remote access and LAN-to-LAN tunnel groups when there is no specific tunnel group identified during tunnel negotiation.

What is the first phase of ISAKMP?

Phase 1 creates the first tunnel to protect later ISAKMP negotiation messages. Phase 2 creates the tunnel that protects data travelling across the secure connection.

Is transparent mode supported in firewall?

Supported only in routed firewall mode. Transparent mode is not supported.

Do you need a mask for a VPN?

The address mask is optional. However, You must supply the mask value when the IP addresses assigned to VPN clients belong to a non-standard network and the data could be routed incorrectly if you use the default mask. A typical example is when the IP local pool contains 10.10.10.0/255.255.255.0 addresses, since this is a Class A network by default. This could cause routing issues when the VPN client needs to access different subnets within the 10 network over different interfaces.