To retrieve the IP, pick up the handset and (if required) open a line. Dial **** (four asterisks) SPA112 At the voice prompt menu, enter 110 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration.
Full Answer
How do I connect a Cisco SPA112 to my Network?
Dialing ****110# will give one address, ****210# will give the other. Attach the Cisco SPA112 to your network. Access your router's remote administration interface via your web browser (typical addresses may be 192.168.0.1 or 192.168.1.1).
What is a SPA112 phone adapter?
GENERAL INFORMATION. Cisco's SPA112 (SPA1XX) series of products are the successors to the popular PAP2 and PAP2T line of adapters. These telephone adapters are reliable and work with the Callcentric service when placed behind your broadband internet router.
What is the default username and password for the spa112/spa122?
For the SPA112/SPA122 please specify "admin" as the username, and "admin" as the password (without quotes). Once you have made your changes click on the Submit button to save your changes.
How do I get a CA certificate for the SPA112 device?
As per CISCO's requirements, a CA certificate is needed to use Secure calls with the SPA112's device. To achieve this you will need to import the CA Cert. Go to Voice >> Provisioning and once there navigate to CA Settings, at Custom CA URL enter the following:
How do I access Cisco SPA112?
How to access the web configuration utility on the Cisco SPA112Open a web browser and enter the IP address of the phone adapter in the address bar, then press Enter.Enter the username of the device in the Username field. ... Enter the password of the device in the Password field.More items...
How do I access Cisco SPA122?
ProcedureUsing a LAN/Ethernet cable, connect the computer to the yellow Ethernet (LAN) port of the SPA122.Open Internet Explorer browser (IE is required to ensure the adapter's configuration page displays properly).Log in: admin / (administrator password)Click Voice > Provisioning.Click Submit.More items...•
How do I factory reset my SPA112?
To reset the device to the default factory configuration, there are two options:Dial **** and at the prompt dial 73738# and then press 1 to confirm.Locate the Reset Button on the back of the SPA112. ... Regardless of how you reset the device, it will take approximately 150 seconds to finish it's reset and reboot.
How do I reset my SPA122?
1 ReplyPlug in power adapter.Plug in a phone to 'Phone 1′ port of the SPA122.Dial ****You should hear 'Configuration Option Menu'Dial 73738# (RESET#)Press 1 to confirm the reset.
How do I log into my Cisco router?
Cisco router login:Make sure you're connected to your network.Open a browser, and go to 192.168. 15.1.Enter the username and password.Default login credentials.Next Up: Speed up your Wi-Fi connection.
How do I log into my network configuration utility?
To open the web-based configuration utility: Open a Web browser. Enter the IP address of the WAP device that you are configuring in the address bar on the browser, and then press Enter. The Login page opens.
How do I reset my Cisco phone adapter?
Factory reset your Cisco SPA112 Hold the reset button down for 30s, or until the power LED light begins to flash again. Release the button. Allow the device to boot up; it may take 2-5 minutes for the reset process to complete. The power LED light will stop flashing once it has initialized.
How do I default a Cisco ATA?
Dial the following IVR code using the phone keypad: 73738 (RESET) followed by the # key. The IVR will ask you to confirm by pressing the 1 on the phone keypad. You must hang-up the phone to commence the reboot sequence.
How do I reset my Cisco 2 port phone adapter?
Press and hold for 10 seconds to restore the factory default settings. Connect to an analog phone, using an RJ-11 phone cable.
How do I log into ATA?
Enter this IP address into your browser 192.168. 15.1 to be prompted for login. Log in to the device using the default (case-sensitive) username ("admin") and password ("admin"), and then click Log In. Navigate to Administration tab.
How do I set up an ATA?
Step 1 Connect the network cable to your network and to the NETWORK port on the ATA. Step 2 Connect the phone cable to the PHONE 1 port on the ATA and to your analog device (phone or fax machine). If connecting a fax machine, connect it directly to the ATA.
What does a Cisco ATA do?
Your analog telephone adapter (ATA) allows you to connect an analog device, such as an analog phone or fax machine, to your network. The connected device can then function like the IP phones in your network.
How to get IP address from Cisco SPA112?
There are two ways to retrieve the IP address of your Cisco SPA112: via analog phone menu, and via your internet router. Analog phone interface. Internet Router. Attach the Cisco SPA112 to your network and attach an analog phone to one of the phone ports, then do the following: Dial **** from the phone, even though there is no dial tone.
What is the NAT address on a SPA122?
Depending on configuration, this leaves the SPA122 with two addresses; a local area network address (such as 192.168.15.1) and an outside Internet address. Dialing ****110# will give one address, ****210# will give the other.
How long does it take for a SPA112 to initialize?
Be sure to allow at least a minute or two for the box to initialize; even a correctly configured and installed SPA112/122 will give no power or dialtone to the phone until initialization is complete.
What is the SIP T1 size?
Cisco's defaults (SIP T1 = 0.5 sec, RTP packet size 0.030 on most Sipura adapters) respectively may cause unnecessary retransmission of commands over connections with high latency and create issues with outbound audio "breaking up".
Is SIP compatible with TLS?
These devices are compatible with TLS, however, some settings need to be adjusted to have it working. This section will be assuming that your SIP account is already enabled to use TLS, if you have not enable it yet, please follow these instructions before going further:
Does ATA phone call go through network?
These calls are not going through our Network but rather through the internet directly to your ATA Device.
Can you disable NAT on a SPA122?
Set NAT Mapping Enable to Yes, then set NAT Keep Alive Enable to Yes. If your environment does not use NAT, you can leave these settings disabled. These features can usually be disabled on the SPA122 if it is connected directly to your modem since its traffic will not be subject to NAT in this configuration.
How to find IP address of Cisco SPA112?
There are two ways to retrieve the IP address of your Cisco SPA112: via analog phone menu, and via your internet router.
How long does it take for a SPA112 to initialize?
Be sure to allow at least a minute or two for the box to initialize; even a correctly configured and installed SPA112/122 will give no power or dialtone to the phone until initialization is complete.
What is the SIP T1 size?
Cisco's defaults (SIP T1 = 0.5 sec, RTP packet size 0.030 on most Sipura adapters) respectively may cause unnecessary retransmission of commands over connections with high latency and create issues with outbound audio "breaking up".
Can you disable NAT on a SPA122?
If your environment does not use NAT, you can leave these settings disabled. These features can usually be disabled on the SPA122 if it is connected directly to your modem since its traffic will not be subject to NAT in this configuration.
Does ATA phone call go through network?
These calls are not going through our Network but rather through the internet directly to your ATA Device.
