SSH to the Cloud Key If you're on Windows then grab PuTTY to use as your SSH client or Mac/nix users can SSH directly from the terminal. Grab the IP for your Cloud Key and connect on port 22 using the username root and password ubnt. Once you've connected it's probably a good idea to change that password using the passwd command.
Full Answer
How do I SSH into the cloud key?
Whatever you are using to login to the Web interface is what you should be using to SSH into the Cloud Key. So if you changed the default username from ubnt to admin and the default password from ubnt to iloveubnt, you would login with ubnt/iloveubnt. Make sure you are SSH'ing into the correct IP address as well.
How to connect a UNIFI AP to remote unifi server via SSH?
How To Connect a UniFi AP to remote UniFi Server via SSH. The default username and password is ubnt. The UniFi should now show up in the UniFi controller as “Pending”. Adopt it and go back the the Unifi AP and run the above set-inform command again. If everything went well the UniFi AP should now be active in the UniFi controller.
How do I connect to a remote server using SSH?
To initiate an SSH connection to a remote system, you need the Internet Protocol (IP) address or hostname of the remote server and a valid username. You can connect using a password or a private and public key pair. Because passwords and usernames can be brute-forced, it's recommended to use SSH keys.
How do I connect the cloud key Gen2 to my Network?
Ethernet Port Connects to a gigabit switch port on your LAN. Power can be provided by an 802.3af PoE switch, such as the UniFi PoE Switch. Side Panel Rack-Mount Notch Rack-Mount Notch Secures the Cloud Key Gen2 into the docking bay of the optional Rackmount Accessory, model CKG2-RM (sold separately).
How do I SSH into ubiquiti Cloud Key?
SSH to the Cloud Key. If you're on Windows then grab PuTTY to use as your SSH client or Mac/nix users can SSH directly from the terminal. Grab the IP for your Cloud Key and connect on port 22 using the username root and password ubnt .
How do I SSH into my UniFi controller?
Open the controller, and select the settings (gear) icon. 2. Navigate to System Settings —> Controller Configuration. Now select Device SSH Authentication and change the Username and/or Password (or add SSH Keys for public-key authentication).
Does Cloud Key run controller?
The Cloud Key is actually a mini computer running the controller software.
What does a Cloud Key do?
The UniFi Cloud key is capable of configuring and managing dozens of UniFi devices in your network such as UniFi Access Points, Switches and Security Gateway routers. Replacing a dedicated server or computer, the UniFi Cloud Key is an ultra-low energy solution with virtually no footprint.
How do I access my UniFi remote remotely?
UniFi OS consoles can be accessed remotely at unifi.ui.com. We recommend using our UniFi OS Consoles and Gateways for the most seamless remote access experience because it eliminates issues introduced by third party factors.
How do I SSH into a device?
ConnectOpen a Command prompt window on your technician PC.Connect to the device: To connect using a username and password: cmd Copy. ssh user@192. 168. ... Enter the password for your user if you're connecting with a username and password, or if you configured your key to require a password.
Is UniFi Cloud Key a router?
A few weeks ago, Ubiquiti unveiled the UniFi Dream Machine, an all-in-one networking device that for $299 combines a router, a switch with four Ethernet ports and a Wi-Fi access point. It has what Ubiquiti calls an integrated cloud key that lets you control your network.
How do I log into my Cloud Key?
The default login is ubnt/ubnt. After the UniFi Setup Wizard is finished, the UniFi Controller management interface will appear. Log in with the Admin Name and Password that you created, and then you can manage your UniFi devices and view network statistics using the UniFi Controller management interface.
Can I host my own UniFi controller?
Hosting your own UniFi controller is a perfect option when you want to start small and have the time to test new releases and keep the server up to date. But make sure that you probably secure the server and make offsite backups.
Is UniFi Cloud Key free?
Unlimited Number of Devices and Clients for Free However, to avoid misuse of this free service, we require users to connect at least one Ubiquiti device within the first day of usage and at least 10 devices during the first month.
Do I need a UniFi controller?
To get the full benefits of the UniFi ecosystem, I recommend that you have an always-available controller, no matter how it's hosted. If you can't run the software, you can setup a UniFi access point in standalone mode using the UniFi mobile app.
Does Ubiquiti require licensing?
Ubiquiti does not charge software licensing or maintenance fees.
How do I login to my Ubiquiti controller?
Windows users: Start > All Programs > Ubiquiti UniFi. 2. The UniFi login screen will appear. Enter the admin name and password in the appropriate fields and click Login.
How do I SSH into UniFi AP using putty?
2:233:58How To SSH Into Any Device Using Putty (Works With Ubiquiti, Cisco ...YouTubeStart of suggested clipEnd of suggested clipIt should be the same so you just click accept. And i will click or i will put in ubnt. Here andMoreIt should be the same so you just click accept. And i will click or i will put in ubnt. Here and then ubnt. And there you go you have officially ssh into your device.
How do I adopt UniFi via SSH?
Use Set-Inform on Unifi Access PointOpen PowerShell. We first need to connect the access point over SSH. ... Connect SSH. Type ssh ubnt@192.168.1.142 (replace 192.168.1.142 with the IP Address of your access point) ... Complete the adoption in the controller.
How do I access UniFi CLI?
UniFi Switch: How to access the CLI & Config via SSHSSH to the switch & login. The credentials can be found in your UniFi controller's settings.At the # prompt, telnet to 127.0.0.1.At the (UBNT) > prompt type “enable“Type “show run” to output the running configuration of the switch.
What firmware is CloudKey Gen 2 Plus?
This was done on CloudKey Gen 2 Plus with firmware 2.1.4
Why is unifi remote access less secure?
Because of how UniFi implemented remote access it means this: Isolating a cloudkey on your network actually makes it less secure because it doesn't check for two-factor. Because of this I dug through the local DB and found a way to remove UniFi cloud accounts from the local accounts.
Does TP Link Omada support firewall?
For small deployments have a look at TP Link Omada. They have only just brought in support for Firewall/Switching but their wireless has been very solid for us. Their OC200/300 controllers also have a nice ON/OFF for cloud access. Local accounts and no cloud.
What is a GSW-2620VHP?
GSW-2620VHP The GSW-2620VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.
What is UAP-AC-HD?
UAP-AC-HDThe UniFi UAP-AC-HD Enterprise WiFi Access Point from Ubiquiti Networks is an indoor/outdoor, high-performance, 802.11AC Wave 2 dual-band access point capable of throughput speeds of up to 2533Mbps and a maximum range of up to 122 metres . Engineered from the ground up to take advantage of 802.11AC Wave 2, the UAP-AC-HD provides unparalleled...
What is UC-CK?
UC-CKThe UniFi UC-CK Cloud Key is an integrated computer and software controller minus the bulk. It features a quad-core processor with 1GB RAM, operating the latest version of the UniFi Controller with built-in hybrid cloud technology. The UniFi Cloud Key is fully capable of configuring and managing dozens of UniFi devices in your deployment. Replacing a...
What is the smallest wireless access point?
UAP-nanoHD The UAP-nanoHD from Ubiquiti Networks is the smallest model in the UniFi indoor wireless access point series. The nanoHD features simultaneous dual-band 4x4 MU-MIMO technology to deliver speeds up to 300 Mbps on 2.4GHz wireless and 1733 Mbps on 5GHz wireless for 200+ users. This model also features convenient 802.3af power over Ethernet.
How to turn off Cloud Key Gen 2?
Power Button Press to turn the Cloud Key Gen 2 on or off.
What switch is used for UniFi Cloud Key?
The UniFi Cloud Key can be powered by a UniFi PoE Switch or other 802.3af-compliant switch.
Can you return a UBIQUITI product without an RMA number?
No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: