DVR remote viewing configuration for software You just need to follow the same process and set up a different port to view your DVR remotely using software or App from a mobile phone. Go to the DVR's network menu and check which port is used for software.
Full Answer
How many cameras can you have on a Cobra DVR?
COBRA 8 Channel Surveillance DVR With 4 HD Cameras – Item 63890 This 8 channel security camera system can monitor up to eight separate cameras at one time. Easy remote access lets you view and control the system from your smartphone or tablet.A huge 1TB hard drive comes pre-installed and ready for recording.
How do I remotely access the DVR?
This configuration works to allow you to remotely access the DVR via a web browser by using a specific port (HTTP) that is found in the DVR's network menu. As long as you have the necessary information you can configure the router.
What port does the DVR remote view use?
As you can see, now it's possible to use the DVR remote viewing feature using a web browser (port 8080) or a software (port 37777). The router knows how to handle the request for both ports and will send the traffic to the DVR that inside your local network.
How do I link my DVR to Safari on a Mac?
Launch Safari on your Mac and enter the DVR static IP address or DDNS domain name (Host Name) that you have set on the DVR in the URL box. Item 63890 For technical questions, please call 1-888-866-5797. Page 33... Preview is closed. Click to open live preview. Figure BV Preview is opened, click to close live preview.
How do I view my Cobra cameras on my phone?
How To Connect Cobra Surveillance System To PhoneInstall it.Open the App.Allow Rc view to your camera and etc.The connected device has been shown.Tap on any one of a box and click at the top right corner.This is how you add your camera on this app one by one.For more Information Contact their support Team.More items...
How do I connect my Cobra 63890 to my phone?
2:3412:43Setting Up Mobile App For The Harbor Freight Cobra Security CamYouTubeStart of suggested clipEnd of suggested clipOkay when you scan you'll see your device come up click on that now you need to know your username.MoreOkay when you scan you'll see your device come up click on that now you need to know your username. So put in your username. And if you have a password you need to put in your password.
Is there an app for Cobra security cameras?
1) Go to cobra.com/support/CobraTag in a browser on the Android phone. 2) TAP THE LINK TO DOWNLOAD THE ANDROID APP FILE (BAC11292012. APK). 3) Download progress can be observed by dragging the title bar down to reveal notifications.
How can I access my DVR remotely?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
Do Cobra cameras need wifi?
Overall, this was very easy to install and does not require wifi, unless you want to put the app on your phone.
What is the default password for Cobra wireless surveillance system?
Step 4: Simply, type in these codes 0000, 1122, 4321, 12345. These are the default security codes set by the manufacturer.
How do I set up RXCamView app?
Open up RXCamView on your device and tap on the head and shoulders icon to open the side menu. Then tap on 'Device List'. On the Device Manager page, tap on the '+' icon then tap on 'IPC/NVR/DVR'. The app will request permission to use your camera, allow it to.
How do I connect my Cobra security camera to my TV?
These are the steps to follow to connect your security camera to your TV monitor:Mount your camera to the wall or ceiling. ... Connect the cables of the camera to the TV. ... Plug in your P4 connector to the camera to make it operational. ... Connect the camera to the power supply. ... Connect your surveillance camera to your TV.
How do I update my Cobra security cameras?
Updating CAM via the Internet1) Start the COBRA Administration Manager.2) Choose the 'File' menu option.3) Select the 'Update Software via Internet' option.4) Choose the type of Internet connection you have.5) Click the 'Next' button.6) Wait for the files to be downloaded and then click 'Next' to proceed.More items...
How do I connect my Cobra camera to the Internet?
0:004:19Cobra 4 Channel Wireless Security System - Install Phone App for ...YouTubeStart of suggested clipEnd of suggested clipAnd it's searching the network and it found my camera. So we'll just go into that and put in aMoreAnd it's searching the network and it found my camera. So we'll just go into that and put in a password the default password is one two three four five six zeros enter and i'll do a save.
How do you record with a cobra camera?
0:005:16Setting Up The Recording Schedule On The Cobra 63890 8 ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipClick that open. And go back down here where it says record. Hit record and schedule down below hereMoreClick that open. And go back down here where it says record. Hit record and schedule down below here says schedule. And this will give up and give you a schedule when you want to record things.
How do I install Cobra wireless surveillance?
0:365:24Harbor Freight Cobra 4 Camera Wireless Surveillance Security ...YouTubeStart of suggested clipEnd of suggested clipThere's also another one here that you spin the camera. So it's kind of a tight fit to be honest.MoreThere's also another one here that you spin the camera. So it's kind of a tight fit to be honest. There's three screws i've got to tighten to get this in place.
Why did my security camera stop working?
At times when the security camera's lights don't work at night is due to poor cable connections. Make sure to check that all connections, cables, and power is intact and tightly connected. If your security cameras are wireless, check the internet and make sure that it is connected successfully to the WiFi.
Page 2: Table Of Contents
These carry important safety information. If unreadable or missing, contact 2. Use as intended only. Harbor Freight Tools for a replacement. 3. Do not modify. Page 2 For technical questions, please call 1-888-866-5797. Item 63890...
Page 3: Service
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. SAVE THESE INSTRUCTIONS. Item 63890 For technical questions, please call 1-888-866-5797. Page 3...
Page 4: Grounding
Figure A: Outlets for 2-Prong Plug Extension Cords Note: Do not use an extension cord with the Power Adapters. Symbology Double Insulated Volts Canadian Standards Association Alternating Current Underwriters Laboratories, Inc. Amperes Page 4 For technical questions, please call 1-888-866-5797. Item 63890...
Page 6: Components And Controls
BNC Video Input USB 2.0 Port RCA Audio Input HDMI Video Output RCA Audio Output VGA Video Output RJ45 LAN Ethernet Port RS485 PTZ Connector 12VDC Power Input Figure C Page 6 For technical questions, please call 1-888-866-5797. Item 63890...
Page 8: Setup
Note: Date and Time are set automatically only when system is connected to the Internet. Otherwise, Date and Time Format can be set manually during the Startup Wizard process. To change settings or set up other functions, see the Owner’s Manual & Safety Instructions Page 8 For technical questions, please call 1-888-866-5797. Item 63890...
Page 9: Operation
Full account information for the account the emails will be sent FROM will need to be entered, as well as the email addresses where the emails will be sent to. See Figure F. Figure F Item 63890 For technical questions, please call 1-888-866-5797. Page 9...
Page 11: Live Screen
No Camera: Camera has not been Click this to start/stop cruise for a PTZ camera. connected to the DVR. Click to playback videos. No HDD: HDD is not installed. Click to view system information. Item 63890 For technical questions, please call 1-888-866-5797. Page 11...
What port is remote viewing on a DVR?
As you can see, now it's possible to use the DVR remote viewing feature using a web browser (port 8080) or a software (port 37777).
What is the default port for a DVR?
Go to the DVR's network menu and check which port is used for software. Let's say you are using a Dahua DVR, the default port is 37777 or if you are using a Hikvision DVR the default port is 80000. Make sure to check your DVR. Open your web browser again and use the port for the configuration.
Can you use the same principle to configure IP cameras for remote viewing?
You can use the same principle to configure IP cameras for remote viewing.
Network Security for Security Cameras
There has been a lot of buzz lately in the news about the network security while remotely monitoring your security camera system. The news stories we watched notified its viewers about the vulnerability and informed anyone who owns a system to change their default passwords. While press releases are good, some information seemed to be lacking.
How to connect your security camera to the Internet
Security cameras that can be connected to the internet directly are called IP cameras or PoE cameras. They are digital cameras that allow the camera to be connected to an internet connection without the need for a recorder or a computer to allow internet connectivity.
How to Remote View Security Cameras for Free
After you’ve connected our smartphone app to a camera or system, you may be wondering how to use the app. CCTV Camera World's mobile Apps allow you to do a lot more than just view your security cameras for free. You can playback recorded footage, control PTZ cameras or motorized lenses, and record short clips on your cell phone just to name a few.
How To View Security Cameras from an iPhone or Android
Once you have setup your security camera system by connecting the cameras to the DVR or NVR, and you have video displaying from each camera on a monitor, the next step is to setup remote viewing for your security cameras.
Dummies Guide To Remote Viewing Security Cameras
If you are not tech savvy and you are looking for an easy to setup surveillance system for your home or business, then look no further. CCTV Camera World's DVR systems and IP camera systems are easy to setup for remote viewing so you can watch your cameras from anywhere in the world.
How to connect your security cameras to the Internet
Knowing how to network your security cameras is crucial to installing and establishing Internet connectivity to your security camera system.
How To View Recorded Video On Your Smartphone
Having a complete security camera system entails being able to access your cameras and view recorded video using your Smartphone. Products from CCTV Camera World give you this luxury.
How to view your system remotely?
For viewing your system remotely with custom ports you first need to fill out the appropriate device credentials using your external IP address . Next, you need to update the default port (as you did in Step 9) to display the custom port number you're using. In this case, the custom TCP port is 45777, indicated below. Lastly, select Start Live Preview to view your system remotely.
What port is used for DVR?
If you changed the TCP port number in your DVR or NVR, then you need to update the port number displayed in the IP/Domain screen in the app as it will default to 37777. In this case, we changed our TCP port to 45777 in our DVR and then updated the app's IP/Domain screen to display Port: 45777 when creating this entry. Next, click Start Live Preview to view your system.
How to view security cameras from the internet?
To view security cameras from the internet, you have to configure port forwarding rules on your router to allow data to pass through its firewall and reach the camera recorder . Port forwarding is not necessary if you want to view the security camera system from the local network only, or if you would like to use the Peer-to-Peer (P2P) ...
What is port forwarding for DVR?
Port forwarding provides a secure direct connection from your phone to your DVR and is highly recommended. Proper configuration of your router's port forwarding rules is a necessary step you must take to view your cameras from the outside world. By default, your router or firewall will block the ports that the DVR or NVR uses to communicate.
What is the default TCP port for DVR?
The default TCP is 37777, and this can remain in place as long as you have not changed your default TCP port. Next, type in the DVR's username and password, and select Start Live Preview to view your system.
Where is the password on a recorder?
Confirm you are using the correct username and password for the recorder. All of the new units have a password label located on top of the unit towards the front.
