Once logged in, navigate to Advanced > Remote Management. On this page, you will note that Remote Management can be performed via HTTP and HTTPS. Enable whichever option makes sense for your needs, and then you will be able to access your wireless gateway's Admin Tool remotely using the protocol you have specified.
Full Answer
How to connect my router to a Comcast modem?
Try restarting both your modem and router.
- Power off your computer and unplug your modem from its power source.
- Unplug your router from its power source. Then verify that both Ethernet cables and the coaxial cable are fastened securely to your devices.
- Reconnect the modem to its power source. Then reconnect the router to its power source.
- Wait two minutes, then power on your computer. ...
How do I install a Comcast modem?
- Older homes that don’t have a coax outlet to plug your modem into will need one installed. ...
- Locations that haven’t had Xfinity service for 12 months or more require a technician to come check the cable line.
- Installations that require more pieces of equipment than comes in a standard installation kit might require professional installation. ...
How do I access my wireless modem?
What to Know
- To access a router, you must know the router's IP address and the administrative user's password and username.
- To request a connection to the router, enter the IP address in a web browser— http://192.168.1.1, for example.
- Make sure you're using the correct IP address. ...
Can I use my own modem with Comcast?
Yes, you can use your own modem and router with Comcast. But should you? Hinch: Yankees letter doesn't change anything. 'We were wrong.' Editorial: Abbott’s plan to slam school door on undocumented... Yes, you can use your own modem and router with Comcast. But should you?
Can I access my Comcast modem remotely?
Once logged in, navigate to Advanced > Remote Management. On this page, you will note that Remote Management can be performed via HTTP and HTTPS. Enable whichever option makes sense for your needs, and then you will be able to access your wireless gateway's Admin Tool remotely using the protocol you have specified.
How do I access my Comcast modem?
Xfinity Router Login:Make sure you are connected to your Xfinity network.Open a browser and go to 10.0. 0.1.Enter a username and password.Change your password.Can't remember your username or password?Other options.Next up: Speed up your wifi connection.
How do I enable remote access to my modem?
Enabling Remote Access on an ADSL GatewayAccess the gateway's web-based setup page. ... Click Status and check the gateway's Internet IP Address.Access the gateway's web-based setup page. ... On the Setup page, click the Administration tab.Change the Gateway Password for added security.Set Remote Management to Enable.More items...
Can I reset my Comcast modem remotely?
0:001:17How to Remotely Restart your Router's Wifi for xfinity - YouTubeYouTubeStart of suggested clipEnd of suggested clipVo tutorial I'll be showing you how to remotely restart your Wi-Fi router. Given that its XfinityMoreVo tutorial I'll be showing you how to remotely restart your Wi-Fi router. Given that its Xfinity router first thing I want to do is I'll go go ahead and put in the address of your router for me it's
What is the IP address for Comcast modem?
To gain access to the configuration pages of your Comcast-provided Gateway, enter 10.1. 10.1 (or the current Gateway's IP address if the default LAN configuration has been changed) into the address bar of your web browser on a computer which has a connection to the internet through the Gateway.
How do you I access my router settings?
Tap on the network name. Look for a 'gateway', 'router' or other entry in the list....Find router IP address on Android or iOSTap on Wi-Fi.Make sure your phone is connected to your router's Wi-Fi network.Tap the 'i' to the right of the network name.Your router's IP address is shown next to 'Router'
How can I remotely control my router?
To turn on remote management: Log in to the router, if you haven't already done so. Click Advanced > Remote Management. Select Turn Remote Management On. Decide whether to give router access to one computer, or several computers in a range of IPs.
Can I access my home network remotely?
You can access your home network remotely by manually turning on the remote management feature on your home router. You should also set up dynamic DNS to tackle the dynamic public IP address problem. Other options include a remote access VPN, third-party apps like “TeamViewer”, or a “Remote Desktop”.
How can I connect to my home internet away from home?
Check out the Remote Desktop utility. It takes a little configuration to set up: You have to add users to a “remote desktop” group, forward a port through your router's firewall to your target system, grab the router's IP address, and connect to your local system using Remote Desktop on your remote PC.
Can you reset modem from computer?
Using the modem configuration utility, users can reset their modem. Most broadband modems have a configuration utility that can be loaded from within a web browser. The utility can be used to monitor signal levels, obtain addresses, and retrieve error codes.
What is WPS stand for?
Wi-Fi Protected SetupWi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier. IMPORTANT for Android TV™ models.
What does the WPS button do?
Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network. This information is provided to help connect your TV, Blu-ray Disc™ player, or other supported home video products to a wireless network using WPS.
What is the default login for Xfinity modem?
Hard reset the device to factory defaults by pressing and holding in the recessed reset button on the rear for 30 seconds. The user name and the password will now become the defaults of admin and password.
How do I change my Comcast router settings?
Using Xfinity xFiOpen the Xfinity app and sign in with your Xfinity ID and password.Go to the Connect tab.Select your network.Select Advanced Settings.Select 2.4 and 5 GHz WiFi.Select Edit next to the WiFi band you want to update.More items...
What is my IP address for my router?
Right-click the Start button then select Command Prompt. Step 2: On the Command Prompt window, enter “ipconfig” and press the [Enter]. The numbers indicated on the Default Gateway section is your router's IP Address.
How many devices can a Comcast remote control?
The Comcast Platinum remote can control up to three devices like a DVR box, sound system, DVD player and/or TV. The Comcast Silver with Red OK/Select remote controls up to three devices like a DVR box, sound system, DVD player and/or TV.
Is Xfinity remote free?
The Xfinity large-button remote is free and may be easier to use if you have a visual impairment or disability. To find out how to order this remote, visit the Accessibility Support Center for Customers with Disabilities.
Does Xfinity XR5 remote work with X1?
The Xfinity XR5 remote works with all X1 TV Boxes. It’s almost the same as the XR2 (below), but can sense tilt, motion, inactivity and shock vibration. The Xfinity XR2v3 remote works with all TV Boxes and Digital Transport Adapters (DTAs).
How to set up Comcast remote?
For Remote With Setup Button 1 Power on the TV and the cable box. 2 Change the input of the TV to which the cable box has been connected. 3 Press and hold the “Setup” button your TV remote and wait for the LED at the top to change to green. 4 Press the “Xfinity” button on the remote until the LED on the top starts to flash green.#N#Green LED Comcast Remote 5 Enter the code that the TV screen shows and press “OK”. 6 The remote will now be paired to the TV.
Why is my Comcast remote not paired?
Pairing Issue: In some cases, it is possible that the Remote and the TV might not have been paired properly due to which the error is being triggered. It is important that both the TV and the Remote pair together correctly that the remote is recognized by the TV box for it to work. This might also trigger the error code 225 on the Comcast device.
Why are my remotes weak?
Weak Batteries: It is possible that the batteries being used by the remote have become weak and aren’t able to supply enough power to send the remotes’ signal. Over the course of time, the batteries being used become weak and need to be replaced to keep the current flow steady.
Do you need to pair a remote and cable box?
The remote and the cable box need to be paired before they can be used together. This pairing is often done when the cable box is first connected but they can get unpaired over the course of time and might need to be paired again. There are two types of remotes, one with the Setup button and others without them.
How to access Xfinity modem?
Once you are connected to the internet, open your browser and type ‘192.168.100.1‘ in the address bar for xfinity modem login. If it fails to open, you can access the Admin tool at http://10.0.0.1. And if still doesn’t open, take out the user manual which came along with your Comcast and checks for the IP address.
What is Comcast modem?
0. Comcast is a high-speed internet service provider for your business through a coaxial cable which carries television and internet signals. Comcast modem basically separates these two networks and provides you the real internet connection for your work. This modem can also connect directly to a single computer or a network router.
How to connect a Comcast router to a computer?
Connect the Ethernet cable from your Comcast to the Ethernet port of your computer, or you can also use your in-home Wi-Fi network to perform comcast router login.
Question
I've read lots of questions and discussions on the subject without success. Not being a very smart network person, I need someone to PLEASE walk me thru setting up the Remote Desktop connection (without leaving out any steps assuming I 'knew or should have known something').
Answers
I know this post is old, but i was searching for answers to why my RDP connection won't work. This may help you though if you haven't figured it out yet:
All replies
To connect through the Internet you have to use a registered public IP. Your PC is on a private network, so you cannot connct to it directly across the Internet.
What is the LAN address of Netgear?
NETGEAR firmware automatically sets 10.0.0.1 as LAN address if it detects another router is connected to your network, like the ISP device you have. You may try login to http://10.0.0.1
Is Netgear a router or modem?
your Netgear "modem" is not a modem but a router. Your ISP provided device is a modem/router combo. Connecting these two together without setting your ISP modem/router into bridge mode creates a double NAT which you should avoid