Are You Ready for the next generation of COMPOOL?
Now that you have experienced the push-button ease of a Compool control system, you are ready for the next generation in pool and spa convenience-with an all-new, one-step upgrade to todays EasyTouch automated controls. Why upgrade now? Easy.
How do I remotely connect to the Intellicenter control system?
The majority of IntelliCenter users typically connect remotely to the IntelliCenter Control System via a Wi-Fi Link Kit (primary client bridge). This option is available in the various “bundled” system kits - IntelliCenter Bundled and Component Parts List
What is the UPC code for Pentair COMPOOL upgrade to easytouch?
Product name: Compool Upgrade to EasyTouch by Pentair Model 521107 UPC Code : 788379803803 Upgrade your Compool system and make your old pool technology new again.
What is the Intellicenter touch screen?
IntelliCenter Touch Screen: The IntelliCenter features a 4” x 3” “capacitive-touch” (glass) color touch screen which is simply a control display that uses the conductive touch of a human finger for input as an interface to the IntelliCenter Control System. The touch screen can be set for daylight, or nighttime optimal viewing.
What is an easy touch control?
What is the Pentair control system?
Does the new remote work on the Easytouch?
About this website
How do I update my Pentair firmware?
Verify Your IntelliCenter Firmware Update Verify the firmware update: From the Home screen, tap Settings > Advanced System Configuration > System > Firmware. Once your firmware is 1.047, you can wait 48 hours for the 1.064 notification or repeat the 1.047 install process with the 1.064 file.
How do I control IntelliCenter on my phone?
0:506:56Pentair Intellicenter Smart Phone Pool and Spa Control App - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe could tap our heater button. And we're going to scroll to heater. And set at 10 103. We see theMoreWe could tap our heater button. And we're going to scroll to heater. And set at 10 103. We see the flame pop-up we're now heating the spa and isolating that water in the spa.
How do I connect to IntelliCenter WiFi?
0:512:51The IntelliCenter™ Control System for Pool and Spa- Wireless ConfigurationYouTubeStart of suggested clipEnd of suggested clipAdvanced system configuration. And then network and Wi-Fi setup tap connect to a wireless networkMoreAdvanced system configuration. And then network and Wi-Fi setup tap connect to a wireless network and wait for your home network to be displayed. Select your home network. And enter the password.
How do you use Pentair Easytouch control system?
1:332:55EasyTouch® Pool and Spa Control Outdoor Panel Overview - YouTubeYouTubeStart of suggested clipEnd of suggested clipButton is this here icon right here you simply hit that that turns on the heater from the outsideMoreButton is this here icon right here you simply hit that that turns on the heater from the outside panel. This is for your solar. If you have two solar panel hooked up to the roof. Sometime.
How do I access Pentair remotely?
0:0410:16ScreenLogic®- iPad Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf we're not on the same local network we can use the remote sign-in option to connect via theMoreIf we're not on the same local network we can use the remote sign-in option to connect via the internet. The first time we connect to the system we'll need to enter the system name manually.
Can I control my pool with my phone?
AquaConnect Web allows you to manage your pool via the Internet from anywhere. The NEW AquaConnect App for iPhone® and iPad® makes it easier to access your pool from your smart device, and streamlines platform use to make settings easier to change and diagnostics easier to read.
Why is my Pentair Intellicenter offline?
If your system shows “Offline”, it means that your system has been disconnected from WiFi for over 60 minutes. Offline status may interrupt notifications and data exchange between the sensor and the app. Once WiFi connection has been restored, your Pentair Home app will automatically reconnect the sensor.App FAQs - Pentairhttps://www.pentair.com › en-us › app-support › app-faqshttps://www.pentair.com › en-us › app-support › app-faqsSearch for: Why is my Pentair Intellicenter offline?
How do I connect my Pentair ScreenLogic to my router?
0:000:44Set up Screen Logic - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn order for your screen logic to work you have to plug in the protocol. Box to your router or modemMoreIn order for your screen logic to work you have to plug in the protocol. Box to your router or modem.Set up Screen Logic - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do I connect my Pentair ScreenLogic to my router?
How do I reset my Pentair Intellicenter WIFI?
Push “Settings” Button on Pool Controller.Scroll Down to “Advanced System Configuration” and Select.Select “Network and WIFI Setup” Then Select “Reboot WIFI Device”Push “Settings” Button on Pool Controller.Scroll Down to “Reboot This Panel” and Select.How To Reboot WIFI Antennae on Intellicenter Pool Controlshttps://allisonpools.com › wp-content › uploads › 2021/03https://allisonpools.com › wp-content › uploads › 2021/03Search for: How do I reset my Pentair Intellicenter WIFI?
How can I remotely control my Android phone from my iPhone?
Part 2. Remote Control iPhone from Android with TeamViewer:From the iPhone, download and install the TeamViewer QuickSupport app for iOS, which you can find from the Apple App Store;Additionally, download and install TeamViewer on Android to connect with the device iPhone;More items...
How do I connect my Pentair app to my WiFi?
From the Home screen, tap Settings > Advanced System Configuration > Network and WiFi Setup. 2. Tap Connect to a Wireless Network and wait for your home network to be displayed. This can take up to a minute or more to complete.
Why does my Pentair Intellicenter say offline?
If your system shows “Offline”, it means that your system has been disconnected from WiFi for over 60 minutes. Offline status may interrupt notifications and data exchange between the sensor and the app. Once WiFi connection has been restored, your Pentair Home app will automatically reconnect the sensor.
pentair easy touch not " NO COMM " | Trouble Free Pool
May 23, 2015 20,587 Tucson, AZ Pool Size 16000 Surface Plaster Chlorine Salt Water Generator SWG Type Pentair Intellichlor IC-60
EASYTOUCH CONTROL SYSTEM 8 AND 4 FOR POOL AND SPA
v EasyTouch Control System User’s Guide iS4 Spa-Side Remote Controller (P/N 520094) QuickTouch® wireless remote (P/N 520148) EasyTouch 4 Indoor Control Panel (P/N 520548)
Pool School: How to Program Your Pentair Easytouch Automation by ...
This session of Pool School by Presidential Pools, Spas & Patio Service Manager, Bill Watson, explains how to program the Pentair Easytouch Automation Panel.
Pentair Easytouch 8 Wireless Troubleshooting | eHow
The Pentair Easytouch 8 Wireless system is designed to allow you to access functions of a spa by remote control. Upon setting up your device, you may begin to experience problems with the power and the remote control functions.
What is the low voltage compartment on IntelliCenter?
Low Voltage Compartment: Top compartment of the IntelliCenter Load/Power Center that contains all low-voltage wiring and components. It is adjoined by the Low Voltage Raceway on the left-hand side of the Load/Power Center.
Where is the IntelliCenter control system transformer located?
IntelliCenter Control System Transformer: The IntelliCenter Control System Transformer is included and installed in either an IntelliCenter Load Center or Power Center. The system transformer is mounted in the high voltage compartment just above the IntelliChlor transformer (if installed).
How many amps does a Pentair power relay have?
According to some references, the Pentair Power Relays support a maximum of 20 amps. But the relay itself indicates a maximum of 25 amps. It may be possible that Pentair de-rated the amperage of the power relay. I cannot say with any confidence.
What is IntelliCenter used for?
In addition, the IntelliCenter Control System can be used to automate other powered items as well, such as landscape lighting, patio and gazebo lights, etc. The IntelliCenter was first introduced to the consumer pool equipment market in the 4th quarter of 2018.
How many relays are included in the load center?
Five (5) power relays are included with the Load Center. Additional relays are included with the i8P / i8PS (3 additional) or i10P / i10PS (5 additional) Personality Kits. Further information on kits can be found in Section 8. of this guide.
How many tabs are on a high voltage panel?
The High Voltage Cover Panel is secured at the bottom by three tabs and secured at the top by two ¼” retaining hex-screws.
Can you use an IntelliCenter relay on a pool cover?
WARNING: The IntelliCenter power relays (Filter/Auxiliary Circuits) should NEVER be utilized for controlling the opening and closing of pool covers, otherwise swimmers may become entrapped under the cover.
What is an easy touch control?
The EasyTouch Control System eliminates the inconvenience of trips to your pool equipment pad, memorizing operating sequences, opening and closing valves and resetting time clocks and thermostats. With push-button operation and clear, intuitive instructions and displays, your EasyTouch system includes all circuitry and fully programmable controls in a single Load Center installed near your pool or spa equipment. This avoids expensive wiring and installation costs to make an EasyTouch system affordable for any budget.
What is the Pentair control system?
Pentair control system with smart phone app is very responsive and easy to adjust items such as temperatures, timers, etc. The additional relays allowed us to add deck lighting to the pool area as well. One criticism is the inability to access controls through the internet; app only works when we are home near modem. Previous system allowed me to start/stop pool from literally anywhere. With wireless camera, we are able to see our pool when away and now wish I still had that access to shut down the system if I saw a problem with water level, a leak at the filter, etc.
Does the new remote work on the Easytouch?
If that's the case and you select one of those items, it will give an error because it doesn't exist in the Easytouch motherboard. - It will function normally otherwise.
What is Pentair IntelliConnect?
The Pentair IntelliConnect system is small in size and replaces any single or dual mechanical time clock. With this system you can download a free app, Link2.0, which will allow you to set your pump schedules, turn equipment on/off, and even allow you to control a Pentair IntelliFlo VSF Variable Speed Pump. You can do all of this, and more, from the convenience of your couch via your mobile device. The Pentair IntelliConnect is very affordable and easy to use.
How many relays can you add to a pool and spa system?
If you have a pool or pool and spa combination you can add on items to meet your systems needs. Even though the box starts with 4 high-voltage relays you can add up to 10, giving you the option to control more equipment. For pool and spa combination systems you can additionally purchase two Hayward Goldline GVA-24 valve actuators to switch between pool mode and spa mode. If you would like to convert your system to saltwater you simply purchase a Hayward Salt Cell and it plugs right into the base system not extra parts required. It also includes a built in 125A subpanel with 12 breaker slots to house all of the equipment wiring.
How many actuators can you add to a pool?
Valve Actuators - You can add up to 4 val ve actuators for whatever your pool demands.
What is OmniLogic app?
New OmniLogic® smartphone app makes controlling your pool and spa equipment simple and even more intuitive
How to contact the pool boys?
Give us a call at 832-473-5715 to schedule an appointment, or Contact The Pool Boys for more information.
Which is better: Hayward OmniHub or Intelliconnect?
It can control your spa and valve actuators, whereas the Intelliconnect and IQPUMP01 cannot. This system still has its limitations when compared to a full feature system like the Hayward OmniLogic, but is a great choice when you have a small to midsize equipment pad.
Can Omnilogic be used with Alexa?
The OmniLogic does have the capability to be used through Amazon’s Alexa for an ultimate user experience. Another great future of this system is the ability to update the software on the existing board. In the past, if your software was outdated and could not handle a new piece of equipment you had to replace the entire board. Now Hayward will put out an update that may include software updates, new user features, or even software bug fixes. When an update comes out you can download it to a USB Stick and upload it into the OmniLogic.
What is an easy touch control?
The EasyTouch Control System eliminates the inconvenience of trips to your pool equipment pad, memorizing operating sequences, opening and closing valves and resetting time clocks and thermostats. With push-button operation and clear, intuitive instructions and displays, your EasyTouch system includes all circuitry and fully programmable controls in a single Load Center installed near your pool or spa equipment. This avoids expensive wiring and installation costs to make an EasyTouch system affordable for any budget.
What is the Pentair control system?
Pentair control system with smart phone app is very responsive and easy to adjust items such as temperatures, timers, etc. The additional relays allowed us to add deck lighting to the pool area as well. One criticism is the inability to access controls through the internet; app only works when we are home near modem. Previous system allowed me to start/stop pool from literally anywhere. With wireless camera, we are able to see our pool when away and now wish I still had that access to shut down the system if I saw a problem with water level, a leak at the filter, etc.
Does the new remote work on the Easytouch?
If that's the case and you select one of those items, it will give an error because it doesn't exist in the Easytouch motherboard. - It will function normally otherwise.
