configure netgear router for remote access

To remotely access your router from your Windows computer:

1. Connect your computer or Wi-Fi device to a different Wi-Fi network.
2. Click the genie icon on your desktop or in the Windows taskbar.
3. The Home screen displays.
4. Select Router Settings.
5. The Router Login window displays.
6. From the Login as menu, select Remote Access.
7. Type your remote genie email and password and click the OK button.

Full Answer

How do I remotely access my Netgear router using readycloud?

• Set up a ReadyCLOUD Account To use ReadyCLOUD, you must have a ReadyCLOUD account. If you do not have a ReadyCLOUD account, click here and click on "Create Account".
• Router Setup Connect a USB storage device to your router's USB port. ...
• Enjoy your data anywhere and anytime through ReadyCLOUD Visit http://readycloud.netgear.com. ...

How to connect Netgear router to computer?

Try restarting both your modem and router.

• Power off your computer and unplug your modem from its power source.
• Unplug your router from its power source. Then verify that both Ethernet cables and the coaxial cable are fastened securely to your devices.
• Reconnect the modem to its power source. Then reconnect the router to its power source.
• Wait two minutes, then power on your computer. ...

How to secure Netgear wireless router?

To offset the potential risks of using the Internet, follow security best practices:

• Use strong passwords for your login credentials. ...
• Keep the firmware of your router, devices, and browsers up to date. ...
• If your router supports it, change your WiFi security option to WPA3 (Wi-Fi Protected Access). ...
• Make sure that remote management access is disabled on your router. ...

More items...

How to factory reset a Netgear wireless router?

To reset your NETGEAR cable modem or modem router:

• Locate the Reset button on the back of your cable modem router.
• Using a paper clip or similar object, press and hold the Reset button for about seven seconds.
• Release the Reset button and wait for your cable modem router to reboot. Factory default settings are restored.

How do I setup my Netgear router for Remote Access?

To remotely access your router from your Windows computer:Connect your computer or Wi-Fi device to a different Wi-Fi network.Click the genie icon. ... Select Router Settings. ... From the Login as menu, select Remote Access.Type your remote genie email and password and click the OK button.More items...

Does NETGEAR support Remote Access?

Using your NETGEAR Desktop genie, you will be able to access your router remotely and configure its settings.

How do I configure my router for Remote Access?

All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.

How do I enable anywhere access on my Netgear router?

To enable or disable Anywhere Access on your NETGEAR or Orbi router:Connect your mobile device to your WiFi network.Launch the Nighthawk or Orbi app. The dashboard displays.Tap the Menu icon in the upper-left corner.Tap SETTINGS > Anywhere Access. ... Toggle the Enable Anywhere Access slider button on or off.

Can I connect to my Nighthawk router remotely?

To use remote access: Type your router's WAN IP address into your browser's address or location field followed by a colon (:) and the custom port number. For example, if your external address is 134.177. 0.123 and you use port number 8080, enter http://134.177.0.123:8080 in your browser.

What can you do with remote access to router?

3:017:55How to Access your Router from Outside Network - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne you will have to turn on remote sharing from your router setting. And second you will have toMoreOne you will have to turn on remote sharing from your router setting. And second you will have to figure out a way to bypass this dynamic IP address for that we will use services like dynamic DNS.

How do I access my home network remotely?

You can access your home network remotely by manually turning on the remote management feature on your home router. You should also set up dynamic DNS to tackle the dynamic public IP address problem. Other options include a remote access VPN, third-party apps like “TeamViewer”, or a “Remote Desktop”.

How does NETGEAR anywhere access work?

The Anywhere Access feature enables you to use the Nighthawk or Orbi app to manage your NETGEAR or Orbi router's settings from anywhere with your Android or iOS device. Anywhere Access is enabled by default to give you reliable access to your router.

Is NETGEAR anywhere access safe?

The Anywhere Access feature in the Nighthawk and Orbi apps uses a secure, authenticated connection through the NETGEAR Cloud and does not open any ports. To avoid confusion between these similar features that function differently, NETGEAR is renaming the app feature from Remote Management to Anywhere Access.

What port does NETGEAR use for remote access?

Normal web browser access uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote web management interface. Choose a number from 1024 to 65535, but do not use the number of any common service port. The default is 8443, which is a common alternate for HTTP.

Can I reboot my NETGEAR router remotely?

Tap Connect remotely. The Nighthawk app dashboard displays. Tap the home icon on the top left of your screen. Tap REBOOT.

How do I turn off my NETGEAR router remotely?

Click Advanced Setup. Click Remote Management. Note: On some products, this option is called Web Services Management. If the check box for Turn Remote Management On is selected, click the checkbox to deselect it and click Apply to save your changes. Remote Management is now turned off.

Is there a Netgear Nighthawk app for PC?

Download the Netgear router app from the Play Store or the App Store. You can also download the app from Nighthawk app com web page. With the Netgear Nighthawk app for PC and smartphone, it becomes really easy to perform the Netgear router setup. The app lets you know how to setup Nighthawk router.

How to check if Netgear router supports Genie?

To check if your router supports NETGEAR Desktop genie, just click this link. Note: For security reasons, you will need to use your local computer first to register your router to your Remote genie account. Once properly set up, you can then use your remote computer to remotely access your router.

How to confirm Netgear email?

A confirmation E-mail will be sent to you by NETGEAR genie Support Team. Open that E-mail and click on Confirm Emailto confirm your E-mail account .

How to create a remote genie account?

Note: In case it automatically logged in after clicking on Router Settings, you can just click on Logout to go back to the login screen. Click on Sign up to create your Remote genie account. Fill out the blank fields and click on Create.

How to use Netgear Desktop Genie?

Use your remote computer (this is the computer outside your network) and open the NETGEAR Desktop genie software. Click on Router Settings and log in using your Remote genie account. Once logged in, a cloud icon will appear on the top-right corner of the Desktop genie window. It means that you are remotely managing this feature of the router.

How to find the model number of a Netgear device?

To find the model/version number, check the bottom or back panel of your NETGEAR device.

How to exit remote access after changing settings?

After changing the settings that you want, just click on Logoutto exit the Remote access.

Can you remotely access Netgear router?

Using your NETGEAR Desktop genie, you will be able to access your router remotely and configure its settings. This article will provide you with the steps that you need on how to enable the NETGEAR genie with remote access.

How to connect a Netgear router to a modem?

First make sure your router is connected to the modem with an ethernet cable and both the devices are powered on. Connect your device (Computer/Smart phone) to the Netgear Router’s wifi network. Launch web browser and type netgearrouter-login.net in the URL bar and login using your login credentials.

How to log into Netgear router?

Log in to the router interface using “admin” for the username and “password” for the password. These are the default login credentials for Netgear routers. You will now be logged into your Netgear router.

How long does it take for Netgear to boot up?

Connect the Netgear router to its power supply unit, then power on the router. The router will take approximately one minute to fully boot up.

What does a reset do on a Netgear router?

A reset will restore your router’s default factory settings and can help resolve software problems associated with your router.

What to do if router doesn't work?

Try to restart both the router and computer. If that does not work, then call the router manufacturer for assistance .

How to connect a modem to a router?

Use an ethernet cable to connect your modem to the port labeled “ Internet” on your Netgear router.

What cable to use to connect to LAN?

Use an ethernet cable to connect your computer to any port labeled “LAN” on your Netgear router.

How to manage router settings?

The easiest way to manage your router's settings and wireless network is the Nighthawk app. You can use the Nighthawk app to update your router's firmware or check the speed of your network. To download the app, visit nighthawkapp.com. If you'd still like to use routerlogin.com or routerlogin.net, visit the Router login page cannot be displayed. ...

What is the default gateway IP for my router?

The default gateway IP for your router is 192.168.1.1.

Are you trying to shop for a Router?

NETGEAR wireless routers are packed with features, value, and industry-leading performance that’s been trusted for over 20 years

How to connect to remote desktop from router?

To do this, right-click the Start menu and select Settings. In the Settings menu, select Update & Security > Windows Security > Firewall & network protection.

How to access router web portal?

To begin, access your router’s web administration page using your web browser (typically 192.168.1.1, 192.168.1.254, or a similar variation) and sign in. You’ll need to make sure that the device you’re using to access the web portal is connected to the same network. If you’re unsure, consult with the user manual for your network router for additional information.

What is RDP port forwarding?

With the RDP port mapped, port forwarding should be active and ready to allow Remote Desktop connections over the internet. You should be able to connect to your PC remotely using your public IP address and RDP port number, with your network router forwarding the requests to your PC.

What port is RDP on Windows 10?

Now, you should change the default RDP port used by Windows for RDP connections from port 3389 to an alternative port number.

How to allow RDP through firewall?

Once you’ve unlocked this menu, find the Remote Desktop and Remote Desktop (WebSocket) options in the list provided. Select the checkboxes next to these options to allow RDP connections through the firewall. Select the OK button to save your choices.

How to change RDP port?

To change the RDP port, right-click the Start menu and select the Run option. Alternatively, select the Windows key + R on your keyboard. In the Run dialog box, type regedit before selecting OK. This will open the Windows Registry Editor. ...

Why change ports on RDP?

This is because the risk of Remote Desktop Protocol attacks is extremely high. While changing ports isn’t the only way to secure your RDP connections, it will help to slow down and limit the risks from random, port scanning bots that search for open RDP ports on your router.

Where is Remote Management on Netgear router?

Some routers called it Remote Access and it’s usually found under Advanced Settings. On Netgear router, you can find this option under Settings > Remote Management.

How to share a router?

Part 1: Turn On remote sharing. Turning on remote sharing on the router is easy. All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router’s web portal, look for the Remote Management option.

How to find which DNS service to choose?

The best way to find, which service to choose, is by checking which service is supported on your router So follow these steps. 1. Login to your router and look for an option that says Dynamic DNS. If it’s not there, then you can download IP updater software from any Dynamic DNS provider.

What is the IP address of a router?

8080. So, if your public IP address is 74.12.168.14, then you’ll have to type 74.12.168.14:8080 on the web browser. 1.

Can I connect an external hard drive to my router?

And finally, you can connect an external hard drive to your router and access it from anywhere.

Can I access my DDNS from my router?

So now that you have set up DDNS and remote access on your router, you can access it from anywhere via the Internet. In case you have an old router here are some tips on how to boost network on your old Wi-Fi