configure openvpn remote access on windows

• Allow Remote Desktop connections on the server PC. Right-click the Windows 10 * Start button and go to System. Select Remote Desktop. Turn on Enable Remote Desktop and click Confirm.
• Create a VPN server using your router. Using a web browser, log in to your router admin panel. Locate the VPN area and inspect the available protocols.
• When in doubt, always use OpenVPN. OpenVPN is a modern and safe protocol that can truly protect you from eavesdroppers and hackers. ...
• PPTP might be easier, but it’s less secure. PPTP is one of the oldest protocols, and it’s native to most platforms. ...
Set up a VPN connection on the client PC. On Windows 10, click the Start button or press Win key. Type VPN settings and press Enter. ...
Connect to the server PC using Remote Desktop. On Windows 10 *, click Start or press Win key. Type Remote Desktop Connection and press Enter. ...
FAQ: Learn more about Remote Desktop and VPN

Full Answer

How do I set up remote access on a VPN Server?

Before you get started, make sure to enable IPv6 on the VPN server. Otherwise, a connection cannot be established and an error message displays. In this procedure, you install the Remote Access role as a single tenant RAS Gateway VPN server. For more information, see Remote Access. Open Windows PowerShell as Administrator.

How do I access the OpenVPN access server’s web server?

This section of the OpenVPN Access Server’s web server is available at the standard URL of the Access Server (https://yourserveraddress/) and provides an interface for your users to login and retrieve a personalized copy of the OpenVPN Connect Client.

How do I deploy an OpenVPN client to a user?

With clients configured, the next step is deploying the configuration profile to users. Go to OpenVPN, then browse to the Server tab . Click the Download Client button for a user. This will generate the client installation files. Select the appropriate installation file for the user's operating system.

How to use OpenVPN on Windows 10 remote desktop?

Right-click the Start button on Windows 10 and proceed to System Remember, Remote Desktop is only compatible with the Windows 10 Pro Edition. Search the VPN area and analyze the available protocols (In case your router is compatible with OpenVPN then you can use it. If it does not you can activate PPTP)

How do I setup a VPN remote access?

Configure Remote Access as a VPN ServerOn the VPN server, in Server Manager, select the Notifications flag.In the Tasks menu, select Open the Getting Started Wizard. ... Select Deploy VPN only. ... Right-click the VPN server, then select Configure and Enable Routing and Remote Access.More items...•

How do I enable OpenVPN on Windows?

Navigate to the OpenVPN Access Server client web interface.Login with your credentials.Click on the Windows icon.Wait until the download completes, and then open it (the exact procedure varies a bit per browser).Click 'Run' or 'Open' to start the installation process. ... Click Install.More items...

How do I connect to OpenVPN server with my device Windows?

Steps: Access your Client UIOpen a browser and enter your Access Server IP address or the custom hostname if you have set that up (recommended).Enter your username and password. Once you have signed in, the recommended OpenVPN Connect app for your device displays at the top.

How do I access my computer using OpenVPN?

After you have installed the OpenVPN Connect app, follow these steps:Click + to add a new connection.Enter your server URL (IP address or custom hostname) in HTTPS format, or alternatively, upload a config file.Enter your user credentials and click Import.

Can you run OpenVPN server on Windows?

Download and Install OpenVPN On a Windows server, we begin by downloading the Windows installer and then running it on our Windows server. Once that has completed, we begin the configuration portion of the setup.

Does OpenVPN work on Windows 10?

You can separately download and install the OpenVPN client on all popular devices for free if you want to create a secure tunnel to the web. Or, you can turn to a commercial VPN provider that adopts OpenVPN. However, OpenVPN may stop working on Windows 10 computers, due to various issues.

Can you connect to OpenVPN without client?

OpenVPN protocol is not one that is built into Windows. Therefore a client program is required that can handle capturing the traffic you wish to send through the OpenVPN tunnel, and encrypting it and passing it to the OpenVPN server.

How does OpenVPN client connect to server?

In such a network, you should use OpenVPN.Install OpenVPN Connect (only once for the first time) Start "App Store" , search and download the "OpenVPN Connect" . ... Download and install a connection setting file (. ovpn file) of OpenVPN (only once at the first time) ... Connect a VPN. ... Enjoy Internet via VPN relaying.

What is the URL for OpenVPN?

https://vpn.businessname.com/

Is OpenVPN Access Server free?

OpenVPN Access Server is free to install and use for 2 simultaneous VPN connections for testing purposes. The OpenVPN community and the OpenVPN Inc. team work together to provide a robust and transparent security product.

How use OpenVPN command line?

To run OpenVPN, you can:Right click on an OpenVPN configuration file (. ovpn) and select Start OpenVPN on this configuration file. ... Run OpenVPN from a command prompt Window with a command such as: openvpn myconfig.ovpn. ... Run OpenVPN as a service by putting one or more .

How do I setup a VPN server on Windows?

To create a VPN server on Windows 10, use these steps:Open Control Panel on Windows 10.Click on Network and Sharing Center.Using the left pane, click the Change adapter settings link. ... On “Network Connections,” use the Alt keyboard key to open the File menu and select the New Incoming Connection option.More items...•

How do I open an OVPN file in Windows 10?

How to Setup OpenVPN on Windows 10Download the official OpenVPN Client.Run the setup with administrator privileges and follow the installation steps. ... Download the configuration file and unzip it. ... Click with right on the OpenVPN desktop icon, click on "Settings" and go to the tab "Compatibility".More items...

How do I OpenVPN in Chrome?

Set up virtual private networks (VPNs)At the bottom right, select the time.Select Settings .In the “Network” section, select Add connection.Next to "Add built-in VPN," select Add .In the box that opens, fill in the info. ... Select Connect.

How do I setup a VPN server on Windows?

To create a VPN server on Windows 10, use these steps:Open Control Panel on Windows 10.Click on Network and Sharing Center.Using the left pane, click the Change adapter settings link. ... On “Network Connections,” use the Alt keyboard key to open the File menu and select the New Incoming Connection option.More items...•

What is OpenVPN Access Server?

OpenVPN Access Server provides web services to run both the Admin Web UI and the Client UI. The Client UI provides your users with pre-configured VPN clients, which simplifies the process of connecting to your VPN server.

What is the OpenVPN admin manual?

For more information about each Admin Web UI section, refer to the OpenVPN Access Server Admin Manual, which provides details about the different configuration options through your Admin Web UI portal as well as details on typical network configurations.

What is the CLI on a VPN?

The Command Line Interface ( CLI) You can use the CLI to manage all of the Access Server VPN settings. And, the CLI enables you to use more advanced functions that aren’t available through the Admin Web UI. Access to the CLI is typically established through an SSH session to your server or directly on your server’s console.

How to know if VPN is on or off?

The Status Overview section indicates whether the VPN server is currently on or off. If it’s on, you can click on Stop the Server to stop the OpenVPN daemons. If the server is off, you can click on Start the Server to start the OpenVPN daemons.

What is the Active Configuration section?

The Active Configuration section displays some important configuration settings that are managed in the configuration and authentication sections of the Admin Web UI.

How to access CLI?

Access to the CLI is typically established through an SSH session to your server or directly on your server’s console. On the CLI you can create your own shell scripts to automate tasks such as creating new users with custom settings or implementing custom authentication options.

Which protocol is better for OpenVPN?

The protocol used for the OpenVPN tunnel itself — UDP is generally the better choice here.

How to deploy OpenVPN?

Deploying the OpenVPN Client 1 Go to OpenVPN, then browse to the Server tab . Click the Download Client button for a user. This will generate the client installation files. 2 Select the appropriate installation file for the user's operating system. 3 Distribute OpenVPN configuration file to user through your preferred method (Ex: email, USB drive, Google Drive, Dropbox, shared folder on network, etc.)#N#The following steps are for Microsoft Windows only. For OSX/Linux/Android/etc. installation, please see our OpenVPN Wiki page. 4 Download the Windows OpenVPN client https://openvpn.net/client-connect-vpn-for-windows/. You can find other Operating System options linked from the Untangle OpenVPN wiki . 5 Run the installer and follow the Installation Wizard: 6 Open the OpenVPN client and choose to import the profile from a file. 7 Browse to the configuration profile you obtained in steps two and three. 8 Click Add. 9 Toggle the switch to connect.

How to enable OpenVPN on NG firewall?

The first step is to enable the OpenVPN server on your NG Firewall by navigating to Apps > OpenVPN > the Server tab . On this page, place a check next to "Server Enabled".

What is NAT OpenVPN?

NAT OpenVPN Traffic will NAT all traffic from remote networks to local networks to a local address. This helps solve routing and host-based firewall issues. The default and recommended value is enabled.

How to install Remote Access Role in VPN?

On the VPN server, in Server Manager, select Manage and select Add Roles and Features. The Add Roles and Features Wizard opens. On the Before you begin page, select Next.

How to start remote access?

Select Start service to start Remote Access. In the Remote Access MMC, right-click the VPN server, then select Properties. In Properties, select the Security tab and do: a. Select Authentication provider and select RADIUS Authentication.

How to select a server from the server pool?

On the Select destination server page, select the Select a server from the server pool option. Under Server Pool, select the local computer and select Next. On the Select server roles page, in Roles, select Remote Access, then Next. On the Select features page, select Next. On the Remote Access page, select Next.

How many Ethernet adapters are needed for VPN?

Install two Ethernet network adapters in the physical server. If you are installing the VPN server on a VM, you must create two External virtual switches, one for each physical network adapter; and then create two virtual network adapters for the VM, with each network adapter connected to one virtual switch.

Can you assign a VPN to a pool?

Additionally, configure the server to assign addresses to VPN clients from a static address pool. You can feasibly assign addresses from either a pool or a DHCP server; however, using a DHCP server adds complexity to the design and delivers minimal benefits.

Where to install a server?

Install the server on your perimeter network between your edge and internal firewalls, with one network adapter connected to the External Perimeter Network, and one network adapter connected to the Internal Perimeter Network.

Can you use a VPN as a RADIUS client?

When you configure the NPS Server on your Organization/Corporate network, you will add this VPN Server as a RADIUS Client. During that configuration, you will use this same shared secret so that the NPS and VPN Servers can communicate. In Add RADIUS Server, review the default settings for: Time-out.

How to add VPN to Windows 10?

On Windows 10, click the Start button or press the Win key. Type VPN settings and press Enter. Click Add a VPN connection and set the following: VPN provider to Windows (built-in). Connection name to any display name. Server name or address to the public IP address * of the server PC.

What is PPTP VPN?

Enable the VPN server. PPTP is one of the oldest protocols, and it’s native to most platforms. That means that you don’t have to install any additional software since you can create a manual PPTP VPN connection using the Windows 10 built-in VPN provider or the integrated PPTP support of another OS.

Why use a VPN?

Use a VPN to protect your privacy and secure your connection.

Can a router use PPTP?

Most routers support PPTP but few of them work with OpenVPN. Unfortunately, PPTP can be easily hacked. In fact, many VPN companies and other security groups consider that PPTP is now obsolete, and they strongly advise against using it. For example, using PPTP VPN in corporations is out of the question.

Is OpenVPN safe?

OpenVPN is a modern and safe protocol that can truly protect you from eavesdroppers and hackers. If your router supports it, we highly suggest using it because it surpasses PTTP.

Can PPTP be hacked?

Unfortunately, PPTP can be easily hacked. In fact, many VPN companies and other security groups consider that PPTP is now obsolete, and they strongly advise against using it. For example, using PPTP VPN in corporations is out of the question.

Is it safe to use RDP port 3389?

In the first case, you only need to forward the RDP listening port (default is 3389) to the PC’s local IP address. But it’s dangerous because it means exposing your home network to the web. The second option is more secure but requires a bit of tinkering: setting up a VPN with Remote Desktop on Windows 10.

How to access remote access server?

On the Remote Access server, open the Remote Access Management console: On the Start screen, type, type Remote Access Management Console, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.

Where is the Configure button in Remote Access Management Console?

In the middle pane of the Remote Access Management console, in the Step 3 Infrastructure Servers area, click Configure.

How to deploy DirectAccess for remote management only?

In the DirectAccess Client Setup Wizard, on the Deployment Scenario page , click Deploy DirectAccess for remote management only, and then click Next.

How to add roles and features to DirectAccess?

On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.

How to install Remote Access on DirectAccess?

On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. On the Select Server Roles dialog, select Remote Access, and then click Next.

How to add domain suffix in remote access?

On the DNS Suffix Search List page, the Remote Access server automatically detects domain suffixes in the deployment. Use the Add and Remove buttons to create the list of domain suffixes that you want to use. To add a new domain suffix, in New Suffix, enter the suffix, and then click Add. Click Next.

What is a remote access URL?

A public URL for the Remote Access server to which client computers can connect (the ConnectTo address)

How to give VPN access to a user?

Go to the Computer Management Section >> Expand Local users and Groups >> Choose Users >> Right click a user where we wish to give VPN access and choose properties.

How to enable routing and remote access?

In the Routing and Remote Access Console , right click server name and choose ” configure and Enable routing and remote access ” option.

How many network interfaces are needed for VPN?

Less than two network interfaces were detected on this machine. For standard VPN server configuration at least two network interfaces need to be installed. Please use custom configuration path instead.

How to open a search engine in Windows 10?

Click Windows Start button >> search run and open it.

How to open a file named hosts?

Go to folder location C:WindowsSystem32driversetc and Choose Show all files. It will list file named hosts. Select it and Click Open.

Can a VPN client communicate over SSTP?

In this section we attach the self signed certificate we created at part Part 3 to the routing and Remote Access service, then only the remote vpn clients can communicate over SSTP.

How to open VPN on desktop?

Double-click the shortcut on your desktop (or go to the Start menu and type OpenVPN to find and click to start the application)

How many configuration files are there in OpenVPN?

Note: The OpenVPN GUI application only supports up to 50 configuration files present in the /config/ folder. Thus, you’ll have to copy only a few configuration files to that folder. Since each file represents a server, you’ll have to know beforehand which servers you’ll want to connect to. Once the installation is complete, you can easily switch between the servers you have copied over.

How to log into ProtonVPN?

Log into your ProtonVPN dashboard at account.protonvpn.com/login. If you do not yet have an account, sign up for a Free plan for Windows.

How to connect to a server on Windows 10?

Right click the application icon, hover over one of the servers, and click connect.

Does ProtonVPN have a VPN server map?

Note: Advanced features available in the ProtonVPN client such as Connection Profiles, the Network Killswitch protection, the VPN Server Map and similar will not be available when using third party OpenVPN clients.

How to import a file from OpenVPN?

Right-click on the OpenVPN GUI systray symbol and click Import file

How to connect to a remote desktop?

Click the Start Button on Windows 10 or press Win key. Key in Remote Desktop Connection and press Enter. Configure your computer to the server PC name. Click connect.

What to do if you have a dynamic IP address?

If you are using a dynamic IP address, register for a dynamic DNS server and use it for remote desktop and VPN connections. You may also need to acquire a static IP address from your internet service provider.

What is a VPN on Windows 10?

A virtual private network encrypts user network traffic to ensure that should hackers access the data they would have no way of decrypting it. The Best VPN service comes with numerous advantages for internet users. In this article, we shall discuss how to configure a VPN with Remote Desktop on Windows 10.

How to enable remote desktop on Windows 10?

Below are steps to help you do it. Right-click the Start button on Windows 10 and proceed to System. Choose Remote Desktop. Activate Enable Remote Desktop and click Confirm. Write the name of the PC.

What is remote desktop?

Remote Desktop, VPN, and a router that supports VPN connections allow you to connect to another computer from any part of the world.

What is remote desktop download?

The Remote Desktop download is available for Android, Windows 10, and iOS. It facilitates remote connection to a server PC