configure remote access on windows server 2008 r2

Enable Windows Server 2008 R2 Remote Desktop Services

• On the Windows® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ...
• Click Roles, and then click Add Roles. ...
• Select Remote Desktop Services, and then click Next. ...
• Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes. ...
• Click Next. ...

More items...

Full Answer

How do I install remote desktop on Windows Server 2008 R2?

Installing Remote Desktop Services Windows Server 2008 R2 Remote Desktop Services may be installed from the Server Manager tool. Within Server Manager, click on Roles in the left hand pane and click on Add Roles in the resulting screen to invoke the Add Roles Wizard. If the introductory screen appears, click on Next to list the available roles.

How do I enable network level authentication for Remote Desktop connections?

Allow connections only from computers running Remote Desktop with Network Level Authentication (more secure). Review the information in the Remote Desktop dialog box, and then click OK twice. PowerEdge, Microsoft Windows 2008 Server R2, Microsoft Windows 2008 Server Service Pack 2, Microsoft Windows 2012 Server, Microsoft Windows 2012 Server R2

How do I access my Remote Desktop settings?

To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.

How do I configure and monitor a VPN remote access server?

In this lesson, you will learn how to configure and monitor a VPN remote access server running Windows Server 2008 and Windows Server 2008 R2. To install the RRAS role service, use the Add Roles Wizard and then select Network Policy And Access Services. RRAS is a role service within this role.

How do I give remote access to a server 2008 R2?

Enable Windows Server 2008 R2 Remote Desktop ServicesOn the Windows ® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ... Click Roles, and then click Add Roles. ... Select Remote Desktop Services, and then click Next. ... Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes.More items...

How do I setup Windows server for remote access?

Steps How to Windows Server Enable Remote Desktop (RDP)Launch the Start menu and open Server Manager. ... Click on the Local Server on the left hand side of the Server Manager window. ... Select the Disabled text. ... Click on Allow remote desktop connections to this Computer on the System Properties window.More items...•

How do I set up remote user access?

This is typically done on your Office Computer.Click the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

How do I setup Remote Desktop Services?

ProcedureLog in to the RDS host as an administrator.Start Server Manager.Select Add roles and features.On the Select Installation Type page, select Role-based or feature-based installation.On the Select Destination Server page, select a server.On the Select Server Roles page, select Remote Desktop Services.More items...•

How do I enable Remote Access to my server?

Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.

How do I give someone Remote Access to my server?

Click Start, point to Administrative Tools, and then click Routing and Remote Access. Double-click Your_Server_Name, and then click Remote Access Policies. Right-click Connections to Microsoft Routing and Remote Access server, and then click Properties. Click Grant remote access permission, and then click OK.

How do I manage Remote Desktop Services?

Click Start, point to Administrative Tools, point to Remote Desktop Services, and then click Remote Desktop Services Manager. Click Start, click Run, type tsadmin....You can run Remote Desktop Services Manager from any of the following locations:Start menu.Server Manager.Microsoft Management Console.

How do I enable RDP on Windows?

How to enable Remote DesktopOn the device you want to connect to, select Start and then click the Settings icon on the left.Select the System group followed by the Remote Desktop item.Use the slider to enable Remote Desktop.It is also recommended to keep the PC awake and discoverable to facilitate connections.More items...•

How do I enable Remote Access on Windows Server 2019?

Open Server Manager from the Start menu. Click on the “Local server” on the left section. Click on the “Remote Desktop” disable button. Agree to Remote Desktop firewall exception warning and add users to allow by clicking on “Select Users“.

How can I access a server from outside the network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How do I enable Routing and Remote Access on Windows Server 2019?

Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN) to permit remote computers to dial in or connect to this network through the Internet. Click Next.

How to access remote desktop settings?

To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.

Who has access to remote desktop?

Remote Desktop Users. Administrators have access by default.

Can you restrict remote desktop access to a few users?

Normally, all servers have Remote Desktop enabled for all users. While this works well, you may want to restrict remote desktop access to a few select users. To do this, click on the third option then click on the Select Users… button.

Can you modify user access for remote desktop?

All user access for Remote Desktop can be modified from here in the future. Once you see that the user is added to the list, click OK. Note that as long as Remote Desktop is enabled the Administrator account will always have access. You can then click Apply to apply the settings to the server and OK to exit the configuration.

What is RemoteApps in Windows Server 2008?

RemoteApps are a part of the Windows Server 2008 R2 Remote Desktop Services role. Up until this point, Remote Desktop Services have been covered in the context of displaying an entire virtual desktop session on a local client from a remote server (otherwise known as an RD Session Host). Whilst this can be useful in a number of situations it is actually more common that only individual applications running on a remote server needs to be displayed on a local client, essentially making the applications appear as though they are running locally. This functionality is provided by RemoteApps and is the focus of this chapter.

How to configure RemoteApp?

To configure an application as a RemoteApp, begin by clicking on the Add RemoteApp Programs link in the Actions panel located in the top right hand corner of the RemoteApp Manager screen. This will display the RemoteApp wizard containing a list of currently installed applications. One or more applications may be selected from the list before pressing the Next button:

What are RemoteApps?

RemoteApps are part of the Windows Server 2008 R2 Remote Desktop Services role. The objective behind remote desktop services is to allow client systems to access desktops and applications running on remote servers. As the description suggests, remote desktop access presents an entire desktop session from the remote server on the screen of the local client. This allows the user to perform a number of desktop based tasks including launching and interacting with applications on the remote host. The RemoteApps feature avoids the necessity to access an entire desktop on the remote system in order to launch an application, instead allowing the user to launch individual applications from their local system. When launched, each RemoteApp appears in its own window on the client's desktop just as any locally running would.

How to launch an application on a remote computer?

To launch an application the user simply clicks on the icon for the required application. First to appear will be the RemoteApp Connecting dialog. This will be followed by a second dialog which contains warnings about any risks inherent in running the application. A Details button is provided to display settings allowing the user to decide which resources on the local system (such as drives, devices, keyboard, mouse, printers, ports etc) should be made available to the application running on the remote system. This can be particularly useful, for example, if a user needs to print from the remote application onto a local printer, or save a file onto a local disk or USB drive:

How to access RemoteApp Manager?

This can be accessed either from the Start -> All Programs -> Remote Desktop Services -> RemoteApp Manager or by running remoteprograms.msc in a Run dialog or at a command prompt. Once launched, the manager will appear as follows:

How to create a RDP file?

To create an RDP file for a RemoteApp, right click on the RemoteApp program in question on the RemoteApp Manager RemoteApp Programs list and select Create .rdp File from the menu. When the RemoteApp Wizard welcome screen appears click on Next to proceed to the package setting screen. On this screen, set the target directory where the .rdp is to be generated. Also on this screen are settings for controlling which server and Remote Desktop Protocol (RDP) port the client system will be directed to in order to launch the RemoteApp. The final setting allows access to the RemoteApp to be protected through the use of digital signatures.

How to access remote app?

By default, RemoteApps are configured to be accessible via RD Web Access (for details on installing and configuring the RD Web Access service role refer read Configuring Windows Server 2008 RD Web Access ). As outlined above this setting can be checked during the RemoteApp configuration process by verifying that the RemoteApp is available through RD Web Access box is set in the properties dialog. This setting can be modified at any time by right clicking on the RemoteApp program in question on the RemoteApp Manager RemoteApp Programs list and selecting either the Show in RD Web Access or Hide in RD Web Access menu option.

How to enable remote access to a server?

To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.

What is VPN in Windows Server 2008 R2?

Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.

How to configure NPS data?

You can configure which NPS accounting data is sent to the computer running SQL Server by selecting options in the SQL Server Logging properties dialog box shown in Figure 9-9. Clicking Configure in this dialog box allows you to specify the properties of the data link to the computer running SQL Server. When configuring the data link properties for the SQL Server connection, you must provide the server name, the method of authentication that will be used with the computer running SQL Server, and the database on the computer running SQL Server that you will use to store the accounting data. Just as it is a good idea to have a separate partition on a computer to store NPS accounting data, it is a good idea to have a separate database that stores NPS accounting data.

Why use IKEv2 over VPN?

The benefit of using IKEv2 over other protocols is that it supports VPN Reconnect. When you connect to a VPN server using the PPTP, L2TP/IPsec, or SSTP protocol and you suffer a network disruption, you can lose your VPN connection and need to restart it. This often involves reentering your authentication credentials.

What is L2TP/IPsec?

L2TP/IPsec is the protocol that you need to deploy if you are supporting remote access clients running Microsoft Windows XP because such clients cannot use SSTP . L2TP/IPsec provides per-packet data origin authentication, data integrity, replay protection, and data confidentiality.

What is EAP TLS?

Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.

What is VPN authentication?

VPN Authentication. A VPN is an extension of a private network that encompasses encapsulated, encrypted, and authenticated links across shared or public networks. A client connects to a public network, such as the Internet, and initiates a VPN connection to a remote server.

How to add remote desktop services to Windows Server 2008 R2?

Windows Server 2008 R2 Remote Desktop Services may be installed from the Server Manager tool. Within Server Manager, click on Roles in the left hand pane and click on Add Roles in the resulting screen to invoke the Add Roles Wizard. If the introductory screen appears, click on Next to list the available roles. On the Select Server Roles screen, select Remote Desktop Services and click on Next to select the specific services required. For the purposes of this chapter just the basic Remote Desktop Session Host option needs to be selected (the other options will be covered in subsequent chapters):

How to switch between remote sessions?

To switch between sessions simply click on the name of the session in the left hand panel and the corresponding desktop will be displayed.

How to invoke Remote Desktop Client?

To invoke the Remote Desktop Client select Start -> All Programs -> Accessories -> Remote Desktop Connection or enter the following in the Run dialog or at a command prompt:

What happens when you exit a remote desktop session?

When the Remote Desktop Client is exited by pressing the 'X' on the control panel the remote session continues to run on the server even though no client is connected. Next time the user connects the desktop session will appear exactly as it was left before.

What is remote desktop services?

Remote Desktop Services provides both remote desktop and remote application access. Under remote desktop access an entire desktop session running on the server is displayed on the client. The user then interacts with the desktop to launch and interact with applications (details on installing applications for use with Remote Desktop Services is covered in Installing Applications for Windows Server 2008 R2 Remote Desktop Services ). In the case of remote applications, the remote application running on the server appears in its own window on the client desktop, to all intents and purposes looking like a local application to the user. Remote applications are covered in detail in Configuring RemoteApps on Windows Server 2008 R2 .

How to close a remote desktop session?

To end the session select Start in the remote desktop session, click on the right arrow button in the bottom right hand corner of the menu and select Log Off. This will close down the remote desktop session and close the remote desktop client.

How to change configuration options for each session?

To change configuration options for each session right click on the desired session in the left hand panel and select Properties. This panel has a number of tabs which enable credentials, screen size and program start properties to be defined. Having configured Remote Desktop Services on a Windows Server 2008 R2 system, the next step is to install applications suitable for remote access as outlined in the next chapter.

How to change service property in Windows Server 2008?

To change a service property, right-click on the service name, and then click Properties. From the Startup type list box, select Automatic. If the Service status is not started, click Start. Click OK. Close the Services window. You are now ready to enable DCOM on your Windows Server 2008.

Where is the security button for ROOT CIMV2?

Click the Security button below the menu tree. The Security for ROOTCIMV2 window is displayed.

What permissions do you need for DCOM?

The user or group you configured for DCOM access must also have Windows Management Instrumentation (WMI) permission to access the Windows event logs required by QRadar.

Can I use WinCollect on Windows 2008?

Event collection over WMI using Windows 2008 is only supported on 64-bit operating systems. Windows 32-bit operating systems do not include the required registry keys to complete the procedcures listed below. Therefore, WMI event collection is not supported on Windows 2008, 32-bit operating systems. Administrators with Windows 2008, 32-bit operating systems can use WinCollect to remotely poll for Security, Application, and System event logs.