To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard.
How to set up a routing and remote access server?
1 Click Start, point to Administrative Tools, and then click Routing and Remote Access. 2 In the left pane of the console, click the server that matches the local server name. ... 3 Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. ... More items...
How do I enable remote access to a Windows Server?
Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN)to permit remote computers to dial in or connect to this network through the Internet.
How do I create a remote access policy in Windows 10?
Create a group that contains members who are permitted to create VPN connections. Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.
How many routing options are there in Windows Server 2008?
Windows Server 2008 has one solid static routing option and one scalable dynamic routing option – RIPV2. I discussed how OSPF has been removed from Windows 2008 (and how I feel about that).
How do I set up Remote Access and Routing?
Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies. Right-click the right pane, point to New, and then click Remote Access Policy.
How do I give Remote Access to a server 2008 R2?
Enable Windows Server 2008 R2 Remote Desktop ServicesOn the Windows ® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ... Click Roles, and then click Add Roles. ... Select Remote Desktop Services, and then click Next. ... Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes.More items...
How do I setup Remote Desktop on Windows Server 2008?
How to configure Remote Desktop in Windows Server 2008 R2 step by...Step 1: Begin the installation. ... Step 2: Select Remote Desktop Services roles you want to install. ... Step 3: Pick the license mode. ... Step 4: Allow access to Remote Desktop Session Host (not required) ... Step 5: Configure the client experience.More items...•
What does Routing and Remote Access do?
Routing and Remote Access Service (RRAS) is a Microsoft API and server software that makes it possible to create applications to administer the routing and remote access service capabilities of the operating system, to function as a network router.
How do I manually grant permissions to remote desktop?
Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I enable Remote Desktop Services?
Set up the PC you want to connect to so it allows remote connections:Make sure you have Windows 10 Pro. ... When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop.Make note of the name of this PC under How to connect to this PC.
What is port for RDP?
Remote Desktop Protocol (RDP) is a Microsoft proprietary protocol that enables remote connections to other computers, typically over TCP port 3389.
What is RD Session Host?
The Remote Desktop Session Host (RD Session Host) holds the session-based apps and desktops you share with users. Users get to these desktops and apps through one of the Remote Desktop clients that run on Windows, MacOS, iOS, and Android. Users can also connect through a supported browser by using the web client.
What is the new name of terminal server?
Terminal Services has been renamed to Remote Desktop Services.
Where can I find Remote Access and routing?
4:257:49Install and Configure RRAS (Routing and Remote Access Service)YouTubeStart of suggested clipEnd of suggested clipAnd i'm gonna close the configure remote access window as well. And then i will just use the toolsMoreAnd i'm gonna close the configure remote access window as well. And then i will just use the tools under routing and remote access. And i'm gonna use the option called configure and enable routing and
How do I restart Routing and Remote Access Service?
To ensure that the service is running, type Get-Service iphlpsvc at a Windows PowerShell prompt. To enable the service, type Start-Service iphlpsvc from an elevated Windows PowerShell prompt. To restart the service, type Restart-Service iphlpsvc from an elevated Windows PowerShell prompt.
How can I use my Windows Server as a router?
Press “Start” and under “Windows Administrative Tools” find “Routing and Remote Access”. Right-click on the server name and select “Configure and Enable Routing and Remote Access”. Press “Next” at the wizard welcome screen. Choose “Network address translation (NAT)” and press “Next”.
What tab must be configured for a user to obtain remote access?
Click Start, point to Administrative Tools, and then click Active Directory Users and Computers. Right-click the user account that you want to allow remote access, and then click Properties. Click the Dial-in tab, click Allow access, and then click OK.
What is port for RDP?
Remote Desktop Protocol (RDP) is a Microsoft proprietary protocol that enables remote connections to other computers, typically over TCP port 3389.
Question
I am having an issue mapping drives over my VPN connection using the MS Routing and Remote access connection.
Answers
I'm not sure why this has come up recently in multiple threads in the past week. Nonetheless, it's more than likely a configuration issue when it was setup, such as leaving that filter checkbox checked running the config wizard.
All replies
I'm not sure why this has come up recently in multiple threads in the past week. Nonetheless, it's more than likely a configuration issue when it was setup, such as leaving that filter checkbox checked running the config wizard.
How many networks can you use RIP on Windows Server 2008?
On the other hand, on a network where you want the Windows Server 2008 system to route for 25 networks or to exchange routes with a Cisco network that uses RIP, you will want to choose dynamic routing. Obviously, you do not want to have to key in those 25 networks manually nor can you provide the true dynamic features that RIP provides.
What was important in the route add command?
What was important in the route add command was the network we want to add, its subnet, the destination/gateway, and the interface for that route.
How to configure RIPv2?
To do this, go to the RIP section, right click, click on New Interface, select the interface you want to add under RIP as you see in Figure 9.
What is static routing?
With static routing, you must make an entry on your Windows Server for every network that will be routed by that server. Thus, for a simple network with a single windows server, routing traffic between two networks, static routing is a “no brainer”. You could configure it with two simple route add commands.
What are the interface numbers in Windows Server?
Windows Server IP interfaces are labeled with an interface number. The interface numbers in Figure 1 are 16, 14, 1, 15, 20, and 12. These interface numbers are used whenever you add or delete routes to the routing table.
What is the second important thing in the route print output?
The second important thing in the route print output is the IPv4 Routing Table. This shows us the network destination, network mask, the default gateway, interface, and metric. This table tells the Windows Server where to route the traffic.
Does Windows Server 2008 have static routing?
Windows Server 2008 has one solid static routing option and one scalable dynamic routing option – RIP V2. I discussed how OSPF has been removed from Windows 2008 (and how I feel about that). We talked about why you would use static routing versus dynamic routing. Finally, I showed you how to configure static routing with the route command and dynamic routing by installing RIPV2 in Windows 2008 Routing and Remote Access.
How to enable remote access to a server?
Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next.
How to reconfigure a server?
To reconfigure the server, you must first disable Routing and Remote Access. You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message.
How to connect to a dial up network?
If they are, see your product documentation to complete these steps. Click Start, click Control Panel, and then double-click Network Connections. Under Network Tasks, click Create a new connection, and then click Next. Click Connect to the network at my workplace to create the dial-up connection, and then click Next.
Can you grant callbacks in Windows 2003?
Administrators can only grant or deny access to the user and specify callback options, which are the access permission settings available in Microsoft Windows NT 4.0. The remaining options become available after the domain has been switched to native mode.
What is VPN in Windows Server 2008 R2?
Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.
How to enable remote access to a server?
To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.
How to configure NPS data?
You can configure which NPS accounting data is sent to the computer running SQL Server by selecting options in the SQL Server Logging properties dialog box shown in Figure 9-9. Clicking Configure in this dialog box allows you to specify the properties of the data link to the computer running SQL Server. When configuring the data link properties for the SQL Server connection, you must provide the server name, the method of authentication that will be used with the computer running SQL Server, and the database on the computer running SQL Server that you will use to store the accounting data. Just as it is a good idea to have a separate partition on a computer to store NPS accounting data, it is a good idea to have a separate database that stores NPS accounting data.
What is L2TP/IPsec?
L2TP/IPsec is the protocol that you need to deploy if you are supporting remote access clients running Microsoft Windows XP because such clients cannot use SSTP . L2TP/IPsec provides per-packet data origin authentication, data integrity, replay protection, and data confidentiality.
What is EAP TLS?
Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.
What is VPN authentication?
VPN Authentication. A VPN is an extension of a private network that encompasses encapsulated, encrypted, and authenticated links across shared or public networks. A client connects to a public network, such as the Internet, and initiates a VPN connection to a remote server.
How to configure a RADIUS client?
To configure a RADIUS client using NPS, open the Network Policy Server console from the Administrative Tools menu. Right-click RADIUS Clients and then click New RADIUS Client. This will open the dialog box shown in Figure 9-6.
How to install IIS Web Server 2008?
Perform the following steps on the VPN server to install the IIS Web server role: Open the Windows 2008 Server Manager. In the left pane of the console, click the Roles node. Figure 1. Click the Add Roles link on the right side of the right pane. Click Next on the Before You Begin page.
How to add a role in a server?
In the Server Manager, click the Roles node in the left pane of the console. In the Roles Summary section, click the Add Roles link. Click Next on the Before You Begin page. On the Select Server Roles page, put a checkmark in the Network Policy and Access Services checkbox.
How to access CRL distribution points?
Click the Details tab of the certificate and scroll down to the CRL Distribution Points entry and click on that entry. In the lower pane you will see the various distribution points based on the protocol used to access those points. In the certificate seen in the figure below, you can see that we need to allow the SSL VPN client access to the CRL via the URL:
How do you know what URL the SSL VPN client needs to connect to in order to download the CRL?
How do you know what URL the SSL VPN client needs to connect to in order to download the CRL? That information is contained within certificate itself. If you go to the VPN server again and double click on the certificate in the IIS console, as you did earlier, you will be able to find this information.
Where is the certificate icon in IIS?
In this example, the name of the server is W2008RC0-VPNGW. Click on the Server Certificates icon in the right pane of the IIS console.
Can you authenticate using a domain?
Since the VPN server is a member of the domain, you can authenticate users using domain accounts. If the VPN server were not a member of the domain, then only local accounts on the VPN server could be used, unless you decide to use the NPS server. I'll do an article on how to use an NPS server in the future.
Is CRL site name secure?
I should note here that using the default CRL site name might not be the more secure option, since it exposes a private computer name to the Internet. You can create a custom CDP (CRL Distribution Point) to prevent this if you consider exposing the private name of your CA in your public DNS a security issue. You can find some information on how to change these values at How to Change the Policy Settings for a Certification Authority (CA) in Windows 2000.
Introduction
Should You Use Static Or Dynamic Routing?
- The question of whether you should use static or dynamic routing is really a question of administrative overhead. In the end, the result of your network traffic being routed to the correct network should be the same, no matter what method you choose. With static routing, you must make an entry on your Windows Server for every network that will be routed by that server. Thus…
Static Routing in Windows Server 2008
- Static routing in Windows Server is nothing new. We have been using the route command for years. You can configure static routing in Windows 2008 Server using either the route command or using the GUI. However, if you use the Windows GUI interface, those routes will not be listed in the CLI interface, when you type route print. Thus, I highly recommend that if you are going to us…
Dynamic Routing in Windows Server 2008 Using RIPv2
- Earlier in the article, I talked about the benefits of configuring dynamic routing. So, now let me provide you the steps to configuring RIPv2 in Windows 2008: 1. The first step is to install the Routing and Remote Access (RRAS) role in Windows 2008 Server. If you go into the Add Roles Wizard, the RRAS role can be difficult to find because what you ...
Summary
- Windows Server 2008 has one solid static routing option and one scalable dynamic routing option – RIPV2. I discussed how OSPF has been removed from Windows 2008 (and how I feel about that). We talked about why you would use static routing versus dynamic routing. Finally, I showed you how to configure static routing with the route command and dynamic routing by installing RI…