Connect the Netgear N300 Wireless Router to the Comcast Business Internet Gateway. Insert one end of the yellow Ethernet cable into the yellow colored port labeled Internet on the Netgear N300 Wireless Router. Insert the other end into one of the four open ports on the Business Internet Gateway.
Full Answer
How do I access the configuration page on my Comcast gateway?
Accessing the IP Gateway configuration To gain access to the configuration pages of the IP Gateway (Comcast modem), enter 10.1.10.1 (or the current LAN IP if the default LAN configuration has been changed) into the address bar of your web browser on a computer which has a connection to the internet through the Gateway.
How do I change the WAP configuration for my Comcast Business device?
Manage the WAP configuration settings to meet your Comcast Business WiFi needs. These settings are editable, once you log in to the device, via the Gateway > Connection > WiFi page.
How do I add a static route to my Comcast router?
Enter your local LAN Gateway IP address (The LAN IP assigned to the router connected to the Comcast commercial gateway). Select Add. The new static route will be added to the static routing table. Repeat steps 1 through 5 to add additional static routes. Select Apply to activate the static routes.
How do I enable remote management for my wireless gateway?
Once logged in, navigate to Advanced > Remote Management. On this page, you will note that Remote Management can be performed via HTTP and HTTPS. Enable whichever option makes sense for your needs, and then you will be able to access your wireless gateway's Admin Tool remotely using the protocol you have specified.
How do I access my Comcast modem remotely?
Once logged in, navigate to Advanced > Remote Management. On this page, you will note that Remote Management can be performed via HTTP and HTTPS. Enable whichever option makes sense for your needs, and then you will be able to access your wireless gateway's Admin Tool remotely using the protocol you have specified.
How can I configure my modem remotely?
All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.
What is Comcast Business bridge mode?
Yeah, bridge mode disables all routing capabilities of the gateway and essentially turns it into a regular retail cable modem. Comcast uses specific routing technologies to allow customer-assigned static IPs onto their network, and bridge mode disables these technologies.
How do I setup a third party modem with Comcast?
Activating a Different Gateway or Third-Party Modem/RouterPlace Your Gateway or Modem. Find the cable outlet most centrally located in your home. ... Connect Your Gateway. ... Wait for Your Gateway or Modem to be Ready. ... Establish a Temporary Internet Connection. ... Activate Your Gateway or Modem. ... Connect to Your Home Network.
Can I remotely access my modem?
The modem can be remotely accessed now from the Internet via its Public IP Address. To access the modem on a remote PC you need to enter “http://165.228.178.7:80“ in the address bar.
How can I access my router remotely from anywhere?
To connect to your personal router remotely, go to your web browser on your phone. Type in your router's IP address. It's the same IP address you used when you were setting up the remote access. A log-in page will be displayed.
What is the difference between router mode and bridge mode?
Differences Between Bridge Mode and Router Mode. The primary difference here is that a single router's bridge feature is used to connect devices within the same network, whereas a router mode is used to connect devices to the Internet at large.
How do I put my modem in bridge mode?
How to Set Up Bridge ModeOpen a web browser from the device that's connected to the network of the router that will run in bridge mode.On the login screen, enter the router's username and password.Head over to Settings > Advanced Settings > Advanced Setup > Wireless Bridge.Click the Enable Bridge Mode checkbox.More items...•
What is bridge mode on a modem?
Configuring a High-Speed Internet modem in Bridge Mode allows your PC, separate router or other device to establish a connection to the Internet. The device usually connects directly behind the High-Speed Internet modem and is configured with the PPPoE (Point-to-Point Protocol over Ethernet) username and password.
How can I bypass Comcast activation?
HOW TO BYPASS COMCAST'S GARDEN WALL/ACTIVATION SCREEN: Locate a telephone. Dial 1-800-266-2278. Follow the prompts and select "Sales" department. Instruct agent who answers you want Comcast Internet.More items...•
How do I activate my Comcast modem without the app?
Activate Your Equipment Online Connect your Internet, Voice and/or TV equipment and turn it on. Go online to Xfinity.com/activate for easy step-by-step activation instructions. If you're activating your Xfinity Mobile device, go to xfinitymobile.com/activate.
How do I change my Comcast modem settings?
To change your modem with Xfinity, buy a compatible unit. Then use the Xfinity mobile app or call their tech support to activate it. Once you finish, set up your network name and password. Then return the old modem to Comcast.
Can I reset my home router remotely?
Not only can you remotely reset the power via an app on your phone, you can set schedules to auto reset or use IP monitoring to automatically power-cycle when it detects the Internet connection has gone down.
How do I access my router settings without Internet?
3 AnswersConnect a wired ethernet cable from your computer to the router.Connect it to the LAN, the ports numbered 1,2,3,4. ... You may want to check if your network card is set to DHCP, Start -> Run -> ncpa.cpl -> right click NIC -> Properties -> Internet Protocol (TCP/IP) -> Properties.More items...•
How do I find my router's IP address without connecting?
1.1" or "192.168. 0.1." If you cannot find your router's IP address, click "Start," type "cmd" and press "Enter." Type "ipconfig" in the Command Prompt window and press "Enter." Look for "Default Gateway" to locate the IP address.
Can I access my router from my phone?
In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings: Make sure your phone is connected to your router's Wi-Fi network. Tap on the network name. Look for a 'gateway', 'router' or other entry in the list.
When your network is hidden, do you need to configure each of your wireless devices manually?
When your network is hidden, you will need to configure each of your wireless devices manually.
What channels are available on 2.4 GHz?
For a 2.4 GHz network, select a channel from 1 through 11. Only channels 1, 6 and 11 are non-overlapping channels.#N#For a 5 GHz network, select a channel from 40, 48, 153, and 161.
What is the default domain name for Comcast?
Enter the Domain Suffix: The default domain name is wp.comcast.net (not typically required in most network configurations)
How many static routes can be added to a router?
A maximum of eight static routes may be added. To set up a static route rule, you must first know the destination IP address, the subnet mask of the destination IP address, and your LAN IP assigned to the router by the Comcast commercial gateway.
What is a static routing table?
Static routing setup. A routing table is the mechanism by which a modem or router memorizes where traffic should go when received. When a router is connected to the LAN of the Comcast Gateway, that router’s routing table is dynamically added (in most cases) to the routing table of the Comcast Gateway.
What is the default DHCP start IP address?
This will be the first LAN IP address of the range of IPs that can be assigned by the LAN DHCP server. The default start IP address is 10.1.10.10.
What is a gateway LAN?
The gateway is configured to use private IP addresses on the LAN side and to act as a DHCP server.#N# If you have an existing TCP/IP network, you can change the Gateway's default LAN to integrate with it.
What is the LAN IP address?
Enter in the LAN IP Address: The LAN IP address is the IP address of the Gateway (a.k.a. the default gateway when configuring a LAN device) as seen by devices on the local network. The default LAN IP address of the Gateway is 10.1.10.1.
Question
I've read lots of questions and discussions on the subject without success. Not being a very smart network person, I need someone to PLEASE walk me thru setting up the Remote Desktop connection (without leaving out any steps assuming I 'knew or should have known something').
Answers
I know this post is old, but i was searching for answers to why my RDP connection won't work. This may help you though if you haven't figured it out yet:
All replies
To connect through the Internet you have to use a registered public IP. Your PC is on a private network, so you cannot connct to it directly across the Internet.