To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard.
How do I enable the routing and remote access service?
To Enable the Routing and Remote Access Service Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the left pane of the console, click the server that matches the local server name. If the icon has a red arrow in the lower-right corner, the Routing and Remote Access service isn't enabled. Go to step 3.
How do I enable remote access to a Windows Server?
Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN)to permit remote computers to dial in or connect to this network through the Internet.
What is the routing and Remote Access Service (RRAS) role service?
The Routing and Remote Access Service (RRAS) role service is available as part of the Network Policy And Access Services server role. You should deploy the Remote Access Service (RAS) component of the RRAS role service when you want to provide either of the following resources to your network environment:
How do I configure and monitor a VPN remote access server?
In this lesson, you will learn how to configure and monitor a VPN remote access server running Windows Server 2008 and Windows Server 2008 R2. To install the RRAS role service, use the Add Roles Wizard and then select Network Policy And Access Services. RRAS is a role service within this role.
How to enable remote access to a server?
What is VPN in Windows Server 2008 R2?
How to configure NPS data?
Why use IKEv2 over VPN?
What is L2TP/IPsec?
What is EAP TLS?
What is VPN authentication?
See 4 more
About this website
How do I access Routing and Remote Access?
Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.
How do I give Remote Access to a server 2008 R2?
Enable Windows Server 2008 R2 Remote Desktop ServicesOn the Windows ® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ... Click Roles, and then click Add Roles. ... Select Remote Desktop Services, and then click Next. ... Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes.More items...
How do I connect to a remote access server?
Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.
How do I add Nat to Routing and Remote Access?
Right-click the server, and select Configure and Enable Routing and Remote Access.When the wizard opens, click Next.Select Network address translation (NAT) and click Next.Select the network interface that your users will use to connect to the internet, and then click Next.More items...
How do I setup Remote Desktop on Windows Server 2008?
How to configure Remote Desktop in Windows Server 2008 R2 step by...Step 1: Begin the installation. ... Step 2: Select Remote Desktop Services roles you want to install. ... Step 3: Pick the license mode. ... Step 4: Allow access to Remote Desktop Session Host (not required) ... Step 5: Configure the client experience.More items...•
How do I manually grant permissions to remote desktop?
Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I connect to a remote server or SSH?
How to Connect via SSHOpen the SSH terminal on your machine and run the following command: ssh your_username@host_ip_address. ... Type in your password and hit Enter. ... When you are connecting to a server for the very first time, it will ask you if you want to continue connecting.More items...•
How can I access my server from outside my network?
Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.
How do I open TCP port 3389?
You can open the Remote Desktop Connection client by going to Run –> mstsc. Simply put, the default port for using the Remote Desktop Protocol is 3389. This port should be open through Windows Firewall to make it RDP accessible within the local area network.
How do you set up a NAT?
Let's walk through setting up a new NAT network.Open a PowerShell console as Administrator.Create an internal switch. PowerShell Copy. ... Find the interface index of the virtual switch you just created. ... Configure the NAT gateway using New-NetIPAddress. ... Configure the NAT network using New-NetNat.
Can a server act as a router?
As you can see, Windows Server can be used as a router in situations in which purchasing a hardware router is not a practical option. Using the Windows Server router can be especially effective in virtualized environments in which virtual machines reside on a number of different virtual networks.
What is the use of NAT?
How does NAT work? A. Basically, NAT allows a single device, such as a router, to act as an agent between the Internet (or public network) and a local network (or private network), which means that only a single unique IP address is required to represent an entire group of computers to anything outside their network.
What tab must be configured for a user to obtain remote access?
Click Start, point to Administrative Tools, and then click Active Directory Users and Computers. Right-click the user account that you want to allow remote access, and then click Properties. Click the Dial-in tab, click Allow access, and then click OK.
What is port for RDP?
Remote Desktop Protocol (RDP) is a Microsoft proprietary protocol that enables remote connections to other computers, typically over TCP port 3389.
Unable to access via remote desktop Windows Server 2008 R2
Hi Arturo, If it's definitely enabled, then check as to whether the Remote Desktop Services service is started, as the netstat output definitely confirms nothing is listening.
Server 2008 R2: Access denied in Remote Desktop Services managers
Server: Windows Server 2008 R2 with Remote Desktop Services. Environment has a SBS 2008 as the PDC. Error: When logging on as a Administrator via RDP, I launch Remote Desktop Services Manager. Once there, I select Sessions, and right click on the session I would like to monitor/assist and ... · Hi, Have you checked whether this user has ...
Denying/Allowing Remote Desktop Users in Windows 2008 Server R2
I'm managing a Windows 2008 R2 Server box. For maintenance, I need for some hours to deny access to all users in the Remote Desktop Users and allow Administrators only. I've tried in gpedit.msc u...
How to enable remote access to a server?
To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.
What is VPN in Windows Server 2008 R2?
Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.
How to configure NPS data?
You can configure which NPS accounting data is sent to the computer running SQL Server by selecting options in the SQL Server Logging properties dialog box shown in Figure 9-9. Clicking Configure in this dialog box allows you to specify the properties of the data link to the computer running SQL Server. When configuring the data link properties for the SQL Server connection, you must provide the server name, the method of authentication that will be used with the computer running SQL Server, and the database on the computer running SQL Server that you will use to store the accounting data. Just as it is a good idea to have a separate partition on a computer to store NPS accounting data, it is a good idea to have a separate database that stores NPS accounting data.
Why use IKEv2 over VPN?
The benefit of using IKEv2 over other protocols is that it supports VPN Reconnect. When you connect to a VPN server using the PPTP, L2TP/IPsec, or SSTP protocol and you suffer a network disruption, you can lose your VPN connection and need to restart it. This often involves reentering your authentication credentials.
What is L2TP/IPsec?
L2TP/IPsec is the protocol that you need to deploy if you are supporting remote access clients running Microsoft Windows XP because such clients cannot use SSTP . L2TP/IPsec provides per-packet data origin authentication, data integrity, replay protection, and data confidentiality.
What is EAP TLS?
Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.
What is VPN authentication?
VPN Authentication. A VPN is an extension of a private network that encompasses encapsulated, encrypted, and authenticated links across shared or public networks. A client connects to a public network, such as the Internet, and initiates a VPN connection to a remote server.
What do I get with a subscription?
With your subscription - you'll gain access to our exclusive IT community of thousands of IT pros. You'll also be able to connect with highly specified Experts to get personalized solutions to your troubleshooting & research questions. It’s like crowd-sourced consulting.
Who are the certified experts?
Our certified Experts are CTOs, CISOs, and Technical Architects who answer questions, write articles, and produce videos on Experts Exchange. 99% of them have full time tech jobs - they volunteer their time to help other people in the technology industry learn and succeed.
How quickly will I get my solution?
We can't guarantee quick solutions - Experts Exchange isn't a help desk. We're a community of IT professionals committed to sharing knowledge. Our experts volunteer their time to help other people in the technology industry learn and succeed.
How to enable remote access to a server?
Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next.
How to reconfigure a server?
To reconfigure the server, you must first disable Routing and Remote Access. You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message.
How to connect to a dial up network?
If they are, see your product documentation to complete these steps. Click Start, click Control Panel, and then double-click Network Connections. Under Network Tasks, click Create a new connection, and then click Next. Click Connect to the network at my workplace to create the dial-up connection, and then click Next.
Can you grant callbacks in Windows 2003?
Administrators can only grant or deny access to the user and specify callback options, which are the access permission settings available in Microsoft Windows NT 4.0. The remaining options become available after the domain has been switched to native mode.
How to install IIS Web Server 2008?
Perform the following steps on the VPN server to install the IIS Web server role: Open the Windows 2008 Server Manager. In the left pane of the console, click the Roles node. Figure 1. Click the Add Roles link on the right side of the right pane. Click Next on the Before You Begin page.
How to add a role in a server?
In the Server Manager, click the Roles node in the left pane of the console. In the Roles Summary section, click the Add Roles link. Click Next on the Before You Begin page. On the Select Server Roles page, put a checkmark in the Network Policy and Access Services checkbox.
How to access CRL distribution points?
Click the Details tab of the certificate and scroll down to the CRL Distribution Points entry and click on that entry. In the lower pane you will see the various distribution points based on the protocol used to access those points. In the certificate seen in the figure below, you can see that we need to allow the SSL VPN client access to the CRL via the URL:
How do you know what URL the SSL VPN client needs to connect to in order to download the CRL?
How do you know what URL the SSL VPN client needs to connect to in order to download the CRL? That information is contained within certificate itself. If you go to the VPN server again and double click on the certificate in the IIS console, as you did earlier, you will be able to find this information.
Where is the certificate icon in IIS?
In this example, the name of the server is W2008RC0-VPNGW. Click on the Server Certificates icon in the right pane of the IIS console.
Can you authenticate using a domain?
Since the VPN server is a member of the domain, you can authenticate users using domain accounts. If the VPN server were not a member of the domain, then only local accounts on the VPN server could be used, unless you decide to use the NPS server. I'll do an article on how to use an NPS server in the future.
Is CRL site name secure?
I should note here that using the default CRL site name might not be the more secure option, since it exposes a private computer name to the Internet. You can create a custom CDP (CRL Distribution Point) to prevent this if you consider exposing the private name of your CA in your public DNS a security issue. You can find some information on how to change these values at How to Change the Policy Settings for a Certification Authority (CA) in Windows 2000.
How to enable remote access to a server?
To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.
What is VPN in Windows Server 2008 R2?
Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.
How to configure NPS data?
You can configure which NPS accounting data is sent to the computer running SQL Server by selecting options in the SQL Server Logging properties dialog box shown in Figure 9-9. Clicking Configure in this dialog box allows you to specify the properties of the data link to the computer running SQL Server. When configuring the data link properties for the SQL Server connection, you must provide the server name, the method of authentication that will be used with the computer running SQL Server, and the database on the computer running SQL Server that you will use to store the accounting data. Just as it is a good idea to have a separate partition on a computer to store NPS accounting data, it is a good idea to have a separate database that stores NPS accounting data.
Why use IKEv2 over VPN?
The benefit of using IKEv2 over other protocols is that it supports VPN Reconnect. When you connect to a VPN server using the PPTP, L2TP/IPsec, or SSTP protocol and you suffer a network disruption, you can lose your VPN connection and need to restart it. This often involves reentering your authentication credentials.
What is L2TP/IPsec?
L2TP/IPsec is the protocol that you need to deploy if you are supporting remote access clients running Microsoft Windows XP because such clients cannot use SSTP . L2TP/IPsec provides per-packet data origin authentication, data integrity, replay protection, and data confidentiality.
What is EAP TLS?
Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.
What is VPN authentication?
VPN Authentication. A VPN is an extension of a private network that encompasses encapsulated, encrypted, and authenticated links across shared or public networks. A client connects to a public network, such as the Internet, and initiates a VPN connection to a remote server.