Remote-access Guide

csiro remote access

by Delmer Gaylord Published 2 years ago Updated 2 years ago
image

Can csironet be controlled from multiple hosts?

Developments were underway to allow CSIRONET to function and be controlled and monitored from multiple disparate hosts – especially PDP-11 systems running RSX-11. The i/o package, the Monitor and Alarm System, and the Network Information Logger were early examples.

What is the history of the CSIRO Division of Computing Research?

The newsletter 28 announced on 1 October 1967 that the Computing Research Section would in future be known as the Division of Computing Research – the standard discipline-based unit for CSIRO. But DCR was different – it did do research, but was mainly providing a service. Dr Godfrey Lance was the inaugural Chief.

Are csironet’s charges really lower than comparable services?

The above addressed the issue of costs, asserting that CSIRONET’s charges were lower than comparable services, and they probably were. But, scientists crave freedom of access to facilities, and are reluctant to spend on things that they can acquire freely.

Are visits to DCR Canberra beneficial to other CSIRO divisions?

Visits by staff from other CSIRO Divisions to DCR Canberra were facilitated, and reported to “have been of considerable mutual benefit”. (I certainly enjoyed my time at DCR, despite the mid-winter cold in Canberra, and learnt a lot.)

image

What was the DCR in CSIRO?

The newsletter 28 announced on 1 October 1967 that the Computing Research Section would in future be known as the Division of Computing Research – the standard discipline-based unit for CSIRO. But DCR was different – it did do research, but was mainly providing a service. Dr Godfrey Lance was the inaugural Chief.

Who was the Chief of CSIRO in 1977?

Thus in 1977, Godfrey Lance handed over the Chief’s role to Dr Peter Claringbold, following the failure to gain more resources from the CSIRO Executive to meet the growing service load. To what extent he was forced to do this may remain unknown. He remained as Assistant Chief in charge of research, but departed soon after. He was at the Avon Universities Computer Centre, Bristol, UK in October 1980 (csiro dms Newsletter no. 70, November 1980), and lived in Bermagui NSW in retirement. He died in 2020 – see obituary.

What package is used for a DCR report?

For the first time, the report was prepared using the COMTEXT package developed by DCR and the COMp 80 system.

What is the interactive system on the CDC 3600?

The interactive system on the CDC 3600 under the DAD operating system allowed interactive users at the consoles to submit short jobs for priority execution, which of course led to contention. Here is an attempt to put a dynamic time-limit on such jobs, dependent on how long the currently-running job has to go.

When was the DCR network developed?

DCR developed a packet-switched network from about 1969, the year the DARPANET was started (which became the Internet). Over time, users could have remote card-readers, printers, plotters, and paper-tape readers and punches, and teletypes or visual terminals attached to a local node (PDP-11). Ten characters per second was the standard speed for teletype terminals, with 30 characters per second for display terminals being considered fast. Most CSIRO sites acquired the basic node, card reader and printer, and often had a DCR staff member as operator by the mid-1970s. For example, Kay Challis at Aspendale.

CSIRONET

DCR developed a packet-switched network from about 1969, the year the DARPANET was started (which became the Internet). Over time, users could have remote card-readers, printers, plotters, and paper-tape readers and punches, and teletypes or visual terminals attached to a local node (PDP-11).

1971-72 – CSIRONET in operation, PDP-11 nodes at branches, reentrant FRED

The 1971-1972 Annual Report can be found here . The contents page is similar to previous years, and there were no new branches (but see below):The network came into operation under the name CSIRONET: Here is the list of consoles: most major CSIRO sites had access, along with several Government Departments.

1972-73 – Extension of CSIRONET to provide local nodes, TED replaces FRED – boxes

CoResearch 170, July 1973, highlighted the arrival of the Cyber 76 qnd the intention to plug it into the ‘CSIRONET’ network.

1980-81 – CSIRONET: 110 nodes, more gateways, microprocessor developments, encryption, software development

The introduction outlined key features of the year, highlighting the VLSI program.

1982-83 – CSIRONET – 141 nodes, micronode deployment, gateways, VAXes

The 1982-83 DCR Annual report can be found here (109 pages). The front cover showed a board from a micronode.

1983-84 – CSIRONET – 100 user nodes, micronode deployment, gateways, UNIX workstation

The 1983-84 DCR Annual report can be found here (78 pages). It was to be the last such annual report for the Division of Computing Research.

Summary

Trevor Pearcey and others had a vision for a networked computing service in the 1940s. CSIRO built up a computing service almost from scratch in the early 1960s, acquiring staff, a site and systems to meet the needs of science, providing a network of 4 host computers in the ACT and 3 state capitals.

What is remote access?

Remote access is the act of connecting to IT services, applications or data from a location other than headquarters or a location closest to the data center. This connection allows users to access a network or computer remotely via an internet connection or telecommunications. Secure remote access benefits include: ...

Why is Citrix remote access important?

Remote access is great for teleworkers, contractors, those who work from home , or individuals displaced from their home office due to natural disaster or other circumstances. It is valuable for businesses to have a strategy for allowing remote access to their users. Employees may have the flexibility to work from home, or have a plan in place if they are not able to go into the office during a natural disaster. View Citrix Remote PC Access

What is Citrix Networking?

With Citrix Networking and SmartAccess, organizations have the capability to control printers, client devices, session connectivity, and reactive security postures. Admins are also able to leverage the full capabilities of Citrix Analytics to collect data for improving app performance, supporting continuous operations, and enhancing security.

How does remote access benefit a business?

Remote access can bring many benefits to your business, from lowering costs to increasing worker satisfaction and productivity.

What happens when an employee is displaced due to a business continuity disruption?

If an employee has been displaced due to a business continuity disruption, they can continue to be productive using a secure remote access connection.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9