How do I access my dns-320l remotely?
Users can also access their DNS-320L remotely using the mydlink™ portal, or by using the mydlink Access NAS app on a mobile phone or tablet. When configuring the DNS-320L, you can create and assign users and groups to folders with either read or read/write permissions.
Can I use the dns-320l with the mydlink cloud service?
The mydlink Cloud service offers complete data management of files, music, photos, and video in the Cloud. So not only can you use the DNS-320L via the Cloud but you can also continue accessing files through the Internet using the built-in FTP server, web file server and the WebDAV protocol.
What is the sharecenter dns-320l?
The ShareCenter DNS-320L is an easy to install data storage platform used for remote access through a local network or over the Internet. This ShareCenter supports up to 2 SATA hard drives and includes the product features listed below: To use your DNS-320L, you will need at least one hard drive installed.
What are the different firmware versions of dns-320l?
DNS-320L firmware 1.09 DNS-320L firmware 5.4.2017. Download DNS-320L firmware 1.06b03 DNS-320L firmware 28.7.2015. Download Software Version Description Date
How do I access my Dlink NAS remotely?
Take note of the IP address under the WAN section....How to Access the Web Interface of the DNS-320 Remotely using D-Link RouterPut a check mark on the row to enable the rule.Enter a name for the policy you would like to create.Enter the IP Address of the DNS-320 (On Step 2)Enter Port 80 both on Public and Private port.
How do I access my D-Link DNS-320L?
To access your DNS-320L using your mobile phone or tablet, please download the 'mydlink Access-NAS' application from the Apple App Store or Google Play. 2. I HAvE LOST my D-LINK CD, wHAT CAN I DO? You can download the software drivers and user manual from the D-Link website.
How do I access my D-Link DNS 321?
Type 192.168. 0.32 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Dlink DNS-321 is admin.
How do I access Dlink Share Center?
ConfigurationConnect to the D-Link NAS device using its IP address in a web browser. Enter username and password. Select Configuration. As alternative option, use the DNS Easy Search utility program from D-Link.Go to Advanced -> Network Access. D-Link 323 (v1.09) D-Link 343 Firmware (v1. ... Under Network Access Settings:
How do I reset my DNS 320L?
To factory reset the DNS-320L locate the small hole on the bottom of the machine marked “reset”. After the DNS-320L has been powered on for at least one minute insert an unfolded paper clip or tiny screw driver in the hole. Push gently until you feel a click and then hold for 10 seconds. Then release the button.
How do I access my DNS 320 from the Internet?
How to Access the Web Interface of the DNS-320 Remotely using D-Link RouterPut a check mark on the row to enable the rule.Enter a name for the policy you would like to create.Enter the IP Address of the DNS-320 (On Step 2)Enter Port 80 both on Public and Private port.
How do I setup my DNS 320?
D-Link DNS-320L Quick Install Guide Manual InstallationRemove the top cover of your device by pressing the push button in and then lift the cover up.Attach the strap to your hard drive(s) with the supplied screws.Insert one or two 3.5” SATA hard drive(s) into the drive bay until they are firmly seated.More items...•
How do I reset my Dlink Share Center?
While the ShareCenter is powered-up, press and hold the reset button located on the rear or bottom of the unit for more than 8 seconds. Note: This procedure should not restore the installed firmware to the factory default version, only the user configurations will be restored to the factory default settings.
What is a DNS 320L?
The ShareCenter ™ DNS-320L is an easy to install data storage platform used for remote access through a local network or from the Internet. This ShareCenter ™ supports up to 2 SATA hard drives and includes the product features listed below:
Why does DNS 320L require more space?
In order to protect your data from hard drive failure, your DNS-320L requires more space than what you will use for your data, sometimes more than double the amount of space required.
How long does it take for DNS 320L to recognize?
Note: Allow 1-2 minutes for the DNS-320L to be recognized.
What is step 41 D link?
Step 41 - D-Link has provided a mydlink service that allows you to remotely access the files from your NAS through the mydlink portal. Read the installation instructions and wait for the process to complete.
What is step 42 in a Dlink server?
Step 42 - The wizard connects you to the mydlink servers and configures your cloud service.
Can you use DHCP on ShareCenter?
You may also use DHCP to configure the IP network settings of the ShareCenter™. In this situation, leave the parameters blank as your router should automatically configure them.
Is D-Link a registered trademark?
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
How to add DNS 320L to mydlink?
Connect your NAS to your mydlink-enabled cloud router and Zero Configuration will automatically configure your DNS-320L and automatically add it to your mydlink account. After the short time it takes to do this you can remotely access your NAS from the www.mydlink.com website to manage and monitor your DNS-320L.
What is a DNS 320L?
The ShareCenter DNS-320L is an easy to install data storage platform used for remote access through a local network or over the Internet. This ShareCenter supports up to 2 SATA hard drives and includes the product features listed below:
How to use NAS wirelessly?
Use the included Ethernet cable and plug it into the DNS-320L. Plug the other end into an available port on your router. If you wish to use your NAS wirelessly, you will be able to remove the cable from the router after Zero Configuration Setup is complete.
How to check for new devices on my Dlink?
Open a web browser and login to your mydlink account. The mydlink page will check for new devices and display a New Device Found! pop-up notification in the bottom-left corner. Click the notification to continue.
How to connect NAS to power adapter?
Connect the power adapter to the power connector on your NAS, then plug the power adapter into a wall outlet.
What is mydlink zero configuration?
If you have a mydlink-enabled cloud router (DIR-808L, DIR-810L, DIR-820L DIR-850L, DIR-860L, DIR-868L, DIR-865L, DIR-855L, DIR-836L), you can take advantage of Zero Configuration setup. Zero Configuration automatically configures your NAS’s settings for you, and adds it to your mydlink account. This type of setup allows you to set up your DNS-320L by simply plugging it in and connecting it to your mydlink-enabled router.
Is D-Link a registered trademark?
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
