From the dd-wrt wiki: If for some reason you completely lost web access to the router, the web server (HTTP daemon) may be shut down. To regain access try starting the web server.
Full Answer
See more
How do I access my DD-WRT remotely?
Go to Administration -> Management -> Remote Access. Enable the necessary settings for remote Web or SSH access (note the WAN IP and port number), then in your main router forward that port to the WAN IP address of the Repeater.
How to access my home router from outside?
When you want to access your router from inside the network; all you have to do is type in the router's IP address in the web browser. Similarly, to access your router from outside, you need to type in your public IP address followed by remote control port no i.e. 8080.
How to enable Remote Access router?
To turn on remote management:Log in to the router, if you haven't already done so.Click Advanced > Remote Management.Select Turn Remote Management On.Decide whether to give router access to one computer, or several computers in a range of IPs.More items...•
What is the DD-WRT default password?
adminThe default username is root and the default password is admin (from v23 SP1).
How can I access my home Wi-Fi from anywhere?
Take Advantage of Windows Firstly, you need to add users to a “remote desktop” group. Then you need to forward a port past the firewall of your router to your target system. The next step is to enter the router's IP address. Finally, connect to your local system using Remote Desktop to your desired device.
Can I connect to my home network from anywhere?
You'll need to dig into your router settings and set up port forwarding for all the services you want to access from outside your home network. The same goes for any services hosted by the router itself.
How do I access my router DDNS?
How to Configure DDNS (Dynamic DNS) in a RouterStep 1: Login to your router via the default gateway address.Step 2: Enter your router credentials into the login page. ... Device Username Password.Step 3: Next, locate the Dynamic DNS (DDNS) settings. ... Step 4: On the DDNS page, select No-IP as the service provider.More items...
How do I access a remote IP address?
Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.
How do I find my DD-WRT password?
Both routers have a password of "admin" by default. Click on "support and documentation" in your router's manufacturer's website to find out their default password.
What does DD-WRT stand for?
DresDren-Wireless RouTerWhat Does DD-WRT Mean? DD-WRT (DresDren-Wireless RouTer) is a type of firmware for routers based on the Linux kernel. It was designed especially for 802.11a/b/g/h/n routers having the Broadcom or Atheros chipsets.
How do I reset DD-WRT to default settings?
Turn the device on, and then hold the Factory Reset button for 30 seconds. After you release, it should be reset to the default username and password.
How do I connect to Wi-Fi from far away?
If you want to connect to your neighbor's wifi, which is a mile away, then the only way to get free internet from that far away is to have a directional antenna with a line of sight, or in layman terms, no barriers in between.
Can I access my router from my phone?
In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings: Make sure your phone is connected to your router's Wi-Fi network. Tap on the network name. Look for a 'gateway', 'router' or other entry in the list.
How do I connect to my home network while traveling?
To use your home IP while away from your home, you've two options at best. Buy dedicated Firewall/VPN device and install/configure in your home so that you can connect to your home IP anywhere around the globe through VPN(which will cost you quite a bit of money).
How do I connect to a network in a different location?
What you need is a Branch Office VPN(Virtual Private Network). A VPN is a method of connecting two separate networks securely through the internet using shared credentials. This technology is installed on your routers/firewals, and knows the internal network range and external IP address of the other router.
What happens if you lose web access to your router?
If for some reason you completely lost web access to the router, the web server (HTTP daemon) may be shut down. To regain access try starting the web server. SSH or telnet into the router and enter the following commands:
Can you restart HTTP daemon?
You can try restarting the HTTP daemon since you can still SSH in. If that doesn't work, you may have to resort to a full reset/reboot.
How to fix Linksys flakey?
Doing a sanity check on the Linksys hardware would probably help. Try restoring it to run on the latest Linksys code. If it's still flakey, you most likely have a hardware issue. One other suggestion is to confirm that you are using the original AC adaptor that came with the Linksys. They have several similar looking, but different voltage AND current ratings, and your hardware might not be getting enough power if the AC adaptor is the wrong one, or is failing.
Which layer does WAN port go from?
2: According to dd-wrt, using the WAN port as a LAN port devolves it from Layer 3 to Layer 2.
