Full Answer
How do I open a port on my Linksys DD-WRT?
The basic process to open a port is: Setup a static IP address on either your computer or device that you want to forward a port to. Login to your Linksys DD-WRT router. Navigate to the port forwarding section.
How do I access the DD-WRT Web-GUI?
See Telnet/SSH_and_the_Command_Line for more details. After installing DD-WRT Firmware you can access the DD-WRT Web-GUI using a web browser pointing to the same IP address as before you installed DD-WRT.
What is a DD-WRT WAP?
With DD-WRT you can buy a device marketed as a router and use it as a WAP. [edit]Secondary Router on a Separate Subnet This is simply a gateway router that is downstream of a primary gateway router.
Do I need DD-WRT If I have an Ethernet cable?
Linking routers by Ethernet cables does not require DD-WRT on any router. However, some more advanced settings are available in DD-WRT. As an example, some colleges still allow students to have their own WAP.
How do I access my DD-WRT remotely?
Go to Administration -> Management -> Remote Access. Enable the necessary settings for remote Web or SSH access (note the WAN IP and port number), then in your main router forward that port to the WAN IP address of the Client router.
How do I access DD-WRT interface?
Type "192.168. 1.1" into your Web browser's address bar and press "Enter" to access the Web-based interface. Log in with the user name "root" and the password "admin" to continue. You can use the Web interface to configure your DD-WRT router's settings, including setting a custom user name and/or password.
What is the default IP address for DD-WRT?
192.168.1.1The default for DD-WRT and many devices is [192.168. 1.1], or see [wikidevi.com Wikidevi]. If the IP address is unknown, see Obtaining Router IP. If still having issues, erase the nvram.
What is the DD-WRT default password?
adminThe default username is root and the default password is admin (from v23 SP1). Some earlier versions of DD-WRT did not require a username.
How do I access DD-WRT Repeater Bridge?
Go to the wireless tab.Choose Repeater Bridge under wireless mode.Match your SSID and channel settings exactly to the main router you will be connecting to.Make sure bridged is selected.Click Save.
Which is better OpenWrt or DD-WRT?
DD-WRT is a close, close second. It's proven to be a solid choice for custom router firmware, but it lacks in some features, customization, and update availability. OpenWrt is the best choice for most people with modern routers and with the time to sink into learning what exactly they can do with it.
Does DD-WRT support VLAN?
What you can do with VLAN support in DD-WRT: Create different subnets for each Ethernet port or groups of ports. Make LAN ports function as WAN ports. 802.1q tagging so that a single port can carry frames for multiple VLAN's.
What is my router static IP?
To find your router's IP address on an Android device, swipe down from the top of your screen and tap “Internet.” Then select your WiFi network and tap the gear icon to the right. Finally, scroll down, and you will see your router's IP address next to Gateway.
Is DD-WRT still good?
DD-WRT can greatly improve your router and make connecting to the internet a much better experience. However, this software does have some potential dangers and downsides you should think about before you decide to flash your router. First of all, installing DD-WRT may void the warranty on your router.
What is client bridge mode?
What is the bridge mode? A wireless bridge (client bridge mode), usually, connects two wired networks using a wireless connection, allowing two or more routers (or access points) to communicate between each other.
How do I find my DD-WRT password?
Both routers have a password of "admin" by default. Click on "support and documentation" in your router's manufacturer's website to find out their default password.
What does DD-WRT stand for?
DresDren-Wireless RouTerWhat Does DD-WRT Mean? DD-WRT (DresDren-Wireless RouTer) is a type of firmware for routers based on the Linux kernel. It was designed especially for 802.11a/b/g/h/n routers having the Broadcom or Atheros chipsets.
How do I reset DD-WRT to default settings?
Turn the device on, and then hold the Factory Reset button for 30 seconds. After you release, it should be reset to the default username and password.
How do I find my DD-WRT password?
Both routers have a password of "admin" by default. Click on "support and documentation" in your router's manufacturer's website to find out their default password.
How to forward a range of ports?
If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Start Port box and then enter highest number into the End Port box. From the Protocol box select the protocol for the ports that you want to forward.
How to port forward on a PC?
Navigate to the port forwarding section.#N#Click the Applications & Gaming link.#N#Click the Port Range Forward or the Port Forward button to forward ports. 1 Click the Applications & Gaming link. 2 Click the Port Range Forward or the Port Forward button to forward ports.
What port does remote desktop use?
Remote Desktop uses port 3389. If you have more than one, set the incoming as a different port and the outgoing to 3389 and then specify the computer. All you have to do then is remember which port number (i.e. 3390, 3391, etc.) goes to which computer. VNC, at least for Windows, uses port 5900.
What port does VNC use?
VNC, at least for Windows, uses port 5900. Again you can change that by either doing the above method OR you can change the port VNC uses in the program settings. (You can do this for Remote Desktop but you have to dig into the registry).
What port is SSH on?
It should be dropped by the company's firewall. If you using the trick to have a ssh server listening on port 443, you are able to get this connection over a proxy server. If you have an open ssh connection, you are able to tunnel every port to your home network ;) Putty overs also a SOCKS proxy server.
How to use SSH on Linksys router?
1. Enable ssh login port 443 on your linksys router running dd-wrt (Administration -> Management -> Remote Access -> SSH Remote Port) - if you don't have free internet access, you can use also a proxy server to connect. 4. After you have established the ssh connection to your router, you can use remote desktop.
What Does a Router Do? An Intro to Port Forwarding
To understand port forwarding, you first have to understand the basics of routers. Every Internet Service Provider (ISP) assigns a public IP address to an internet connection. However, every device on a network uses a unique Private IP.
How Do I Set Up Port Forwarding On a Router?
There a few easy steps to set up and use port forwarding on a DD-WRT router. As always, make sure that your router is in working condition and the internet connection is active before changing settings.
How to Troubleshoot Port Forwarding
If you turn on the Universal Plug n Play (UPnP) option in DD-WRT, it will overwrite static port forwards that you set here. If your static port forwarding is important, turn off UPnP.
Best Routers For Port Forwarding
Trying to decide on a new router for your home network? We have the best routers to help forward your ports with DD-WRT!
What is a WAP router?
For a large network where the DD-WRT router does not provide suitable network core, Wireless Access Point(WAP or just 'AP') allows wireless clients to be a part of the larger network. In this case, clients normally get DHCP configuration from the gateway or some other DHCP server, and could be accessed by other clients on the network (if allowed).
What happens if you don't turn off DHCP?
If you did not turn off DHCP, when you plug your router into the network (after configuration), your WAP may provide IP addresses to clients on the wired network, and this may be inappropriate.
Why do vendors charge more for WAPs?
Vendors such as Linksys typically charge more for devices which work as standalone WAPs because routers are typically used by home users and WAPs are more popular for businesses . With DD-WRT you can buy a device marketed as a router and use it as a WAP. [edit]Secondary Router on a Separate Subnet.
Does DD-WRT router use WAN port?
Normally, the router does Layer 3 IP routing. but by "Assigning WAN Port to Switch," your DD-WRT router will bypass that functionality and just pass on the Layer 2 ethernet packets from your wired network to the wireless network and vice versa.
Does DD-WRT support 802.11?
Because of that, the IEEE 802.11r-2008 protocol, a.k.a. Fast Transition (FT), was developed. DD-WRT does not currently support 802.11r FT but there is support for it in OpenWRT. The wireless client must also support Fast Roaming for this protocol for it to work; typically it will be cell phones that support it.
Access Via A Web Browser
- After installing DD-WRT Firmware you can access the DD-WRT Web-GUI using a web browser pointing to the same IP address as before you installed DD-WRT. These are some of the most common default IP addresses: 192.168.1.1 (most commonly used on Linksys and Asus), 192.168.2.1 (some Belkins), 192.168.11.1 (some Buffalos), 192.168.10.1 or 192.168.30.1 (s...
Username and Password
- The latest versions of DD-WRT will require you to set your own username and password when you first access the web interface. Because the SSH user is always root, it is critical that a strong password be used. These passwords should be a minimum of 12 characters and use numbers and valid non-alphabetic characters.12 characters dramatically reduces the probability of a succ…
Elements of The Web-Gui
- The Web-GUI has five main elements 1. 1.The tabbed menu system 2. 2.Main area 3. 3.Action buttons 4. 4.Help information 5. 5.Some system essentials Clicking these text buttons gives you access to furter information 1. 1.More... (More Help) 2. 2.Firmware details Some notes about the screen elements. 1. The default information screen is the same as menu selection: Status->Sys-I…
Menu Interface Map
- Select one of the menu points below for information about settings within that menu page. (Menu structure as of June 2012 - svn19342 Mega). 1. Setup 1.1. Basic Setup 1.2. DDNS 1.3. MAC Address Clone 1.4. Advanced Routing 1.5. VLANs 1.6. Networking 1.7. EoIP Tunnel 2. Wireless 2.1. Basic Settings 2.2. Radius 2.3. Wireless Security 2.4. MAC Filter 2.5. Advanced Settings 2.6. …
Setting Details About The Web-Gui
- Under Administration -> Managementyou can set various details about the Web-GUI. Like: 1. set Username and Password 2. control Access to the Web-GUI locally/remotely and more 3. select between different Router GUI styles [[Image:
Regaining Access
- [edit] Locally
If for some reason you completely lost web access to the router, the web server (HTTP daemon) may be shut down. To regain access try starting the web server. SSH or telnetinto the router and enter the following commands: To connect through secure HTTP, add the option -Sat the end of … - [edit] Remotely
Method 1: See Enable Web Interface Over SSH? Method 2: If you're at a remote location and have access to your router through SSH or telnet, but you'd like to enable remote web access, you may use the following command to allow access from one remote IP address: 1. 1.1. iptables -I INPU…
Simulation
- (This section has not been updated for quite some time). A setup simulation of V22-DD-WRT interface is here. A setup simulation of V23-DD-WRT interface is here. A setup simulation of V24beta-DD-WRT interface is here.