You can tunnel remote desktop, vnc and what ever you need. you only need a dd-wrt router with ssh enabled and putty! 1. Enable ssh login port 443 on your linksys router running dd-wrt (Administration -> Management -> Remote Access -> SSH Remote Port) AND (Services -> Services -> Secure Shell
Secure Shell
Secure Shell, or SSH, is a cryptographic (encrypted) network protocol operating at layer 7 of the OSI Model to allow remote login and other network services to operate securely over an unsecured network.
Full Answer
How do I login to the DD-WRT via SSH?
The DD-WRT firmware can use user/pass logon or only allows connections from clients whose public keys are manually entered via the web interface. Multiple keys can be entered by placing them on separate lines. If you want to use user/password to login using SSH use user "root" with the password you set in the webinterface
What is the default port for DD-WRT to auto login?
This is useful when you need dd-wrt to auto-login to another host via SSH. Choose a random, non-standard port number >1024, especially if you enabled SSH access from the Internet! Most attackers will use a port scanner that only scans for common open ports by default.
What is remote SSH management and how do I enable it?
This feature makes it possible to connect securely to the router's HTTP web interface, even when the interface has been configured to only be accessible by computers on the router's LAN. First, 'Remote SSH Management' must be enabled under Administration -> Management if you wish to connect to your router from the WAN.
What is the ssh port on my router?
For instance, if your router's WAN IP address is 12.23.34.35, its remote administration SSH port is 9999 and its LAN-accessible web interface is at port 80: The resulting connection:
How do I SSH into DD WRT?
To connect to a router running DD-WRT firmware perform following:Login into router's web GUI as administrator.Go to Services > Services and "Enable" SSHd under Secure Shell.Go to Administration > Management and "Enable" SSH Management under Remote Access.More items...
How do I telnet to SSH?
Telnet/SSH CLIClick the. ... Enter the IP address of a host or device and port number that a service is listened to on a remote machine. ... Select a connection protocol from the Protocol list. ... Enter the user name and password to access the device.Select a Jumpbox from the Local Jumpbox list.More items...
What is the DD WRT default password?
adminThe default username is root and the default password is admin (from v23 SP1).
Which is better Telnet or SSH?
The most important is that SSH is much more secure than Telnet, which has caused it to replace Telnet almost completely in everyday use. Telnet and SSH use different default ports. While Telnet can only transfer data as plain text, SSH can encrypt traffic in both directions.
What is remote SSH?
SSH or Secure Shell is a network protocol that connects users to a remote computer over a secure connection. This allows administrators and other authorized users to connect to secure computers over a network that is not secure, like the Internet. This is accomplished through the use of encryption.
How do I find my DD-WRT password?
Both routers have a password of "admin" by default. Click on "support and documentation" in your router's manufacturer's website to find out their default password.
What does DD-WRT stand for?
DresDren-Wireless RouTerWhat Does DD-WRT Mean? DD-WRT (DresDren-Wireless RouTer) is a type of firmware for routers based on the Linux kernel. It was designed especially for 802.11a/b/g/h/n routers having the Broadcom or Atheros chipsets.
Why DD-WRT is better?
Essentially, it echoes the signal to widen its range. With DD-WRT, you can take a regular router and make it into a range extender. A stronger, better, optimized DD-WRT signal may also be able to more easily reach farther devices, even without a range extender.
How do I use Telnet?
AnswerOpen a command prompt.Type in "telnet
How do I SSH?
How to use an SSH clientStart PuTTY.In the Host Name (or IP address) text box, type the hostname or IP address of the server where your account is located.In the Port text box, type 7822. ... Confirm that the Connection type radio button is set to SSH.Click Open.More items...
How do I telnet in Linux?
To use telnet command to log in to a server, use the syntax below. In the black console, specify the username and password. To login using putty, enter the server's IP address and click on the 'Telnet' radio button as shown.
What are the telnet commands?
Telnet commands and optionsCommandCodeDescriptionNOPX'F1'No operation.Data MarkX'F2'The data stream portion of a Synch. This should always be accompanied by a TCP Urgent notification.BreakX'F3'NVT character BRK.Interrupt ProcessX'F4'The function IP.12 more rows
How does SSH work?
For the latter to work, a small public key is given to the server and the server gives your client its public key. Your client encrypts information to the server using the servers public key and the server encrypts information sent to you using your public key. Private keys are never exchanged, and are used to decrypt the information encrypted with the associated public key.
How to use user/password to login using SSH?
If you want to use user/password to login using SSH use user "root" with the password you set in the webinterface
What is Dropbear SSH?
The Dropbear SSH client allows you to specify the password through an environment variable. This is useful when you need dd-wrt to auto-login to another host via SSH.
How to enable key authentication in Putty?
In Putty, you can enable key authentication by opening the SSH authentication configuration (Connection -> SSH -> Auth) and entering or browsing to your private key file. Also make sure your auto-login username is root (in Connection -> Data).
How to log into router web interface?
Open your local browser window and point it to http://localhost:12345, and you should be able to log into the router's web interface as if you were on the router's local area network. This connection is secure!
What is the default password for a router?
When asked for the password, enter your router's password (default "admin")
Can DD-WRT use user/pass?
The DD-WRT firmware can use user/pass logon or only allows connections from clients whose public keys are manually entered via the web interface. Multiple keys can be entered by placing them on separate lines.
Authentication
We'll start with an optional part first; the key pair. So you understand, you have 3 options when it comes to authenticating to your router:
Router Configuration
Go to " Services " and then the " Services " sub-tab and scroll down to where you see " Secure Shell "
Loopback Adapter Configuration
Note: this is only required if you want to enable Windows file sharing.
PuTTY Configuration
Open PuTTY and it will bring you to the Session options. Enter your IP or DDNS information and the listening port. You can come back to this area when your done configuring PuTTY and save the options as well so you don't have to type them in every time.
Browser Configuration & Drive Mapping
Configure IE for Internet browsing (understand that all Internet traffic will be re-directed through your SSH tunnel, but DNS requests won't):
More Encryption
If you created a key pair you may want to have it available at all times. What I did was use a free program called Jetico BestCrypt Traveller, which requires no installation at all which makes it perfect for use on all computers. It creates encrypted containers that I then put my key and PuTTY in and store it on the web.
Permission Denied Using SSH with DD-WRT
If you’re like me, you have probably hit a brick wall when trying to SSH into the router after it’s been imaged with DD-WRT.
Check All SSH Settings
There are two place you want to update SSHD settings. Navigate to the following location
How many users does DD-WRT have?
DD-WRT's CLI has two users: root and reboot. They both have the same password. Logging in as reboot is just a fast way to reboot the router. You might also want to rename this user.
Can you tunnel in SSH?
You could also setup tunneling in your SSH client and not enable remote https management. For example, in Putty you could add:
Is SSH tunneling secure?
That's a very good point! It's a secure solution, while also having benefit of saving valuable router resources (no need for extra HTTPS service running in the background). Just encrypt the HTTP traffic through SSH tunnel.
Does SSH tunnel work for RDP?
I use the SSH tunnel a lot so I don't have to open many ports to the world, and like you said the entire connection is encrypted. It works well for RDP connections as well. I also like the ability to use the router as a proxy server through the SSH tunnel. Most networks allow port 22 through.
Big vs Mega-Are they Swapped or is Big just the Ultimate adjective
So, I been seeing this around the forums for a while with people asking why the DDWRT Big ( dd-wrt.v24-44715_NEWD-2_K3.x_big.bin ) [24.9MB] file is so much larger than the Mega file. ( dd-wrt.v24-44715_NEWD-2_K3.x_mega.bin ) [7.25MB] I am a newbie to this so I can't speak from authority, but as far as I can tell they seem to be swapped.
I have a router from Flashrouter.com who flashed DDWRT for me. I found in the DDWRT Administration tab, (under Command Shell), commands that look like it's for Flashrouter.com. Please see below
Part of one command is under COMMAND SHELL:"nvram set flashr_last_......"
My experience with dd-wrt on a Netgear R6700 v3 router and IP Address 0.0.0.0 issues
I'm hoping to just open some general discussion and maybe save someone in the future some headaches based on my experience.
Need help with WDS on DDWRT
I have two r6700v3s and a r6300v2 running ddwrt . One r6700v3 is functioning as my gateway and the others are in wds. I followed all the guides and have wds running, however I can never get internet access on the two routers that are nodes in wds. Anyone knows what am I doing wrong? Any help is greatly appreciated. Thanks in advance!
