What to do if you cannot connect to your Deco remotely?
- Step 1.. Please check whether the mobile device with the Deco app installed has internet access or not when you are...
- Step 2.. Check if the Deco units have internet access. You can connect your phone to Deco’s Wi-Fi and then go to the...
- Step 3.. Test if you can manage Deco via the Deco app in the local network. If...
Full Answer
How do I connect my Deco to the Internet?
Ÿ Wired: Turn off the Wi-Fi (if any) on your computer and connect to the router using an Ethernet cable. Ÿ Wireless: Connect to the wireless network of your Deco. (The wireless network you configured during the internet setup) 2.
How to find the IP address of the Deco network?
Tips: To find the IP address, launch the Deco app and go to More > Advanced->LAN IP. 3. Enter the password of your TP-Link ID to log in. Tips: The Owner TP-Link ID is the ID that you used to set up the Deco network via Deco app.
How to log into the web-based interface of my Deco?
How to log into the web-based interface of my Deco? After configuration on the Deco app successfully, you can check the internet status or manage your Deco via a web browser. Currently, only some models support web-based management, but don’t worry, other models will support this feature via firmware updates in the future.
Where can I check the Internet and Deco information?
You can check the internet, Deco, and clients’ information on the web management page, and there are some advanced settings on the web management page. Here takes Deco M5 as an example. Is this faq useful? Your feedback helps improve this site.
Can you access Deco remotely?
If the mobile device doesn't have internet access, it won't be unable to manage Deco remotely. Step 2. Check if the Deco units have internet access. You can connect your phone to Deco's Wi-Fi and then go to the internet on the phone to check.
How can I access my tp-link router remotely?
How do I configure Remote Management for my TP-Link Wireless Router?Open the web browser and in the address bar type in:Type the username and password in the login page. ... Click Security->Remote Management on the left side.With the default setting (Port 80 and IP address 0.0. ... Click Save to save the settings.
How do I access my Deco router admin page?
How to log into the web-based interface of my DecoConnect your device to Deco (wired or wirelessly). ... Launch a web browser, enter http://tplinkdeco.net or the LAN IP address shown on the Deco app in the address bar to log into the web management page of your Deco. ... Enter the password of your TP-Link ID to log in.More items...•
How can I access my router remotely from anywhere?
To connect to your personal router remotely, go to your web browser on your phone. Type in your router's IP address. It's the same IP address you used when you were setting up the remote access. A log-in page will be displayed.
Can I access router settings from phone?
In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings: Make sure your phone is connected to your router's Wi-Fi network. Tap on the network name. Look for a 'gateway', 'router' or other entry in the list.
How do I connect to TP-Link DDNS?
Go to Advance > Network > Dynamic DNS. Select TP-LINK as the DDNS service provider. Click Register, enter a hostname to create your own domain name, for example, test.tplinkdns.com. Then just click Save and the domain name will be bound to your router automatically.
Can I connect Deco to PC?
How to connect a device to my Deco? Deco supports both wired and wireless connections. For wireless devices, you only need to search Deco's Wi-Fi name on the client and connect with the Wi-Fi password. Besides, each Deco provides two Ethernet ports on the back for wired devices such as PC, printers, TVs, etc.
What is the Deco default password?
IP Address192.168.1.1 Load AdminUsernamePasswordSSIDUsers ManualUser Manual
How do I log into Deco M5?
By using a web browser of your choice and entering the IP address of your Deco M5 router in the address bar you will load the login screen. You can find the ip address on the back of your router. Now enter the default username and password of your router and you will be granted access to its admin panel.
How do I connect to WIFI from far away?
If you want to connect to your neighbor's wifi, which is a mile away, then the only way to get free internet from that far away is to have a directional antenna with a line of sight, or in layman terms, no barriers in between.
How can I remotely access my wifi?
How To Get WIFI In Remote Areas – 6 Ways To Get Internet (Guide)Go for satellite internet.Tethering.Use a USB dongle.Use a MIFI device.Mobile wireless.DSL internet.
How can I use my home IP while in another location?
To use your home IP while away from your home, you've two options at best. Buy dedicated Firewall/VPN device and install/configure in your home so that you can connect to your home IP anywhere around the globe through VPN(which will cost you quite a bit of money).
How do I log into my TP-Link tether app?
How to use Tether to setup your TP-Link RouterStep 1: Go to your smartphone's wireless settings and connect to your router's wireless network. ... Step 2: Open the Tether App.Step 3: Tap on your router Icon under Local Devices. ... Step 4: You may be prompted to log in or change the password.More items...•
How do I access my TP-Link IP camera from the Internet?
How to view your IP camera remotely via a web browserOpen a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera. ... After you change the port, you will need to reboot the camera in order to save the changes.More items...•
What is TP-Link Cloud?
TP-LINK Cloud Cameras are cloud-based Wi-Fi video monitoring devices with free live streaming and remote viewing that makes it easy to stay connected with whatever you care for most from the people in your life, to your business, from wherever you are.
What is a TP-Link ID?
A TP-Link ID allows you to manage your home network and devices with a single account using apps such as Tether, Kasa and Deco. With a TP-Link ID, remembering endless usernames and passwords is a thing of the past.
How to connect to a Deco router?
1. Connect your device to Deco (wired or wirelessly). Ÿ Wired: Turn off the Wi-Fi (if any) on your computer and connect to the router using an Ethernet cable. Ÿ Wireless: Connect to the wireless network of your Deco. (The wireless network you configured during the internet setup)
Can you check the status of a Deco?
After configuration on the Deco app successfully, you can check the internet status or manage your Deco via a web browser. Currently, only some models support web-based management, but don’ t worry, other models will support this feature via firmware updates in the future.
PSA: RAID is not a backup
This ISN'T a recently learned lesson or fuck up per-se, but it's always been an acceptable risk for some of my non-prod stuff. My Plex server is for me only, and about half of the media was just lost due to a RAID array failure that became unrecoverable.
I don't understand why the native Plex apps don't keep a local index of meta data and shows for fast searching and browsing
Third party clients like Infuse and PKC do this and it makes using Plex so much better, especially remotely.
Can we Auto skip intro?
I was wondering if there is a setting to auto skip intro and not have to keep hitting the skip button.
Plex Best Features
I've had Plex for about a year now, and I JUST discovered the shuffle option. My god, this changes everything! I can shuffle episodes of a single TV show, or all of my TV shows. I can even filter my shows (ie - shows from 1990) and shuffle those, and it feels like I'm back in my childhood!
I guess i am addicted to plex now!
For questions and comments about the Plex Media Server. The Plex Media Server is smart software that makes playing Movies, TV Shows and other media on your computer simple.
