Remote-access Guide

defender dvr remote access

by Mrs. Vincenza Carroll IV Published 2 years ago Updated 2 years ago
image

Part of a video titled DEFENDER External Networking Tutorial - 21000 Series
0:08
3:25
Started. Begin by retrieving your routers IP address to do this click on the start button in yourMoreStarted. Begin by retrieving your routers IP address to do this click on the start button in your lower left-hand corner then click run in the window that appears enter the letter CMD.

What is defender 1 step™ remote viewing?

The DEFENDER 1 Step™ Remote Viewingsoftware offers consumers a simple, less than five minute port forwarding solution never before seen in do-it-yourself security. Offered as a free download at www.defender-usa.com, the program guides users through the settings and options that need to be enabled on a DVR and router to begin port forwarding.

How do I set up remote access agent DVR?

Click on the server icon, remote access Agent DVR uses WebRTC to setup remote connections so doesn't require any port forwarding setup and will work even over mobile internet connections. To connect remotely you will need to pair Agent with your iSpyConnect account.

Should I connect my security camera DVR to my Network?

First, here are some of the benefits of connecting your DVR to your network. Being able to watch your security cameras while you are away from the location is one of the most important features of current DVRs.

What port does DVR use on the Internet?

HTTP PORT: 88 (You can use port 80 but there are some Internet Service providers which block the use of port 80. I usually just change it to be on the safe side.) Configure Your Browser’s Security Settings In Order To Download the DVR Web Service.

How does Defender 1 step work?

How long does it take to get 1 step remote viewing?

image

Can I access my DVR remotely?

DVRs/NVRs that have a built-in network capability can be accessed over the internet remotely or outside your home network on a computer, desktop video surveillance software, phone apps or web browsers.

How do I access my defender camera online?

Locate the Defender Web Plugin and set it to Always Activate. Close Firefox and restart. Enter the URL and log in. The Live View page is where you will be able to watch a live view of your cameras.

How do I setup my DVR for remote access?

How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.

How do I connect my defender HD to my phone?

0:404:19How to Install and Setup the Defender HD App on an Android™ SmartphoneYouTubeStart of suggested clipEnd of suggested clipWhen you log into the app you'll see a screen with a grid and several icons at this point you willMoreWhen you log into the app you'll see a screen with a grid and several icons at this point you will need to add your DVR to the account.

How do I download the defender app?

Open https://aka.ms/AndroidDefender on your Android device to go to Microsoft Defender in the Google Play Store. Note: If your device has both a Personal Profile and a Work Profile, then you need to install the app in the Personal Profile. Follow the installation steps on the Play Store page.

How do I get the verification code for defender 4k?

3:145:38How to Setup and Activate the Defender 4K (8MP) DVR ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipApp we recommend writing this code down for when you setup the app. At this stage you can set upMoreApp we recommend writing this code down for when you setup the app. At this stage you can set up your mobile. App. This QR code can also be found on the bottom of the DVR.

How can I access my DVR from my phone?

0:316:00How to connect to a DVR using an Android Phone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. AndMoreThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. And the username and password to. Start we're going to click this icon right here on the top left corner.

How can I remotely access my DVR without static IP?

Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.

How do I find the public IP address of my DVR?

If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the 'Setup' button. Enter the system password and press 'Enter'. Select 'System Setup' and press 'Enter'.

How do I reset my defender camera?

0:003:06How To Reset Your Defender Guard Camera - YouTubeYouTubeStart of suggested clipEnd of suggested clipButton to reset the camera simply press and hold the reset button for 15. Seconds ensure that theMoreButton to reset the camera simply press and hold the reset button for 15. Seconds ensure that the led. Light beside the reset button is flashing green before attempting to add your camera.

Why can't I see my CCTV remotely?

What to Do If You Cannot Remotely View Security Cameras Using the Internet via Port Forwarding. Make sure your cameras are connected to the network. Ensure all the ports of the network configuration are mapped to the Internet. Open the firewall in the router to allow Internet access to the camera.

How do I setup my Swann DVR for remote viewing?

0:291:32how to link your Swann DVR/NVR with your phone or tablet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have download the Swan view link app you just scan the QR code like this and hey presto youMoreOnce you have download the Swan view link app you just scan the QR code like this and hey presto you're connected to see what's happening anywhere in the world the same Swan link technology keeps.

How do I setup my QVIS DVR for remote viewing?

Step 1: Setting up your DVR. Plug your DVR to your router via a standard ethernet cable. ... Step 2: Getting your remote details. Once the unit is back on select the Menu button in the bottom left and go to Settings and Network again. ... Step 3: Adding your DVR to the app. ... Step 4: Live viewing your cameras. ... Step 5: Playback.

How do I log into my DVR?

0:041:19How to Login to your DVR or NVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn this video we're going to show you how to log into your DVR. Here we have a four-channel DVR.MoreIn this video we're going to show you how to log into your DVR. Here we have a four-channel DVR. First we're going to right click then click main menu this brings you to the graphical login interface

How does Defender 1 step work?

The DEFENDER 1 Step™ Remote Viewingsoftware offers consumers a simple, less than five minute port forwarding solution never before seen in do-it-yourself security. Offered as a free download at www.defender-usa.com, the program guides users through the settings and options that need to be enabled on a DVR and router to begin port forwarding. Following the input of a DVR’s IP address, 1 Step will automatically sync the DVR to the router, allowing users to view their property from anywhere in the world with an Internet connection while saving up to two hours of set-up time. As a pioneer in D.I.Y. security with roots dating back to 1999, DEFENDER continues to transform the category with intuitive solutions that give consumers peace of mind knowing they have protected what they value most.

How long does it take to get 1 step remote viewing?

NIAGARA FALLS – February 26, 2013 – DEFENDER® is pleased to announce the release of 1 Step™ Remote Viewing, new proprietary software that makes viewing footage from a security system easily accessible in under five minutes.

What is a security camera called?

Security cameras that can be connected to the internet directly are called IP cameras or PoE cameras. They are digital cameras that allow the camera to be connected to an internet connection without the need for a recorder or a computer to allow internet connectivity. In this guide we demonstrate how to configure a new uninitialized camera and connect it to the internet for remote viewing.

What is dynamic DNS?

Dynamic DNS: An Explanation & How To Accommodate It. A dynamic DNS can cause you quite a headache down the road after installing a CCTV security camera system. For that reason, it's better to deal with it right away than wait until it becomes a major problem for you.

What happens when you install a security camera?

After installing your security camera system, one of the first walls you might find yourself running into is getting your camera feed pulled up on your internet browser. Assuming you've connected your DVR/NVR to your network correctly, this is a pretty simple issue to fix. Continue reading →

Is there a buzz about security cameras?

There has been a lot of buzz lately in the news about the network security while remotely monitoring your security camera system. The news stories we watched notified its viewers about the vulnerability and informed anyone who owns a system to change their default passwords. While press releases are good, some information seemed to be lacking. So we've written this article to add more information that will be helpful to any end user of a security camera system.

How to connect to DVR from outside?

When you have the ability to connect from outside of the network you are in, type in your Public IP Address into the URL bar on Internet explorer and make sure to add the ‘:88’ at the end. You should see the ActiveX web service prompt. If you are able to connect to the DVR internally but are unable to once you are outside of that network, it will more than likely be a port forwarding issue. Check your settings and try again.

How to connect to DVR?

Connect to Your DVR Internally Using Internet Explorer. You should now be able to connect to your DVR internally within your network. This is a bit different from connecting to it externally. You will use the Static Internal IP Address and Port number that you configured on your DVR in order to do this.

How to log into my router?

Log in to your router using the gateway IP address and username and password that has been set to it. By default, most routers have their default gateway IP address set to 192.168.1.1. This is what you will type into the URL bar of your browser. Once you put that in and hit Enter, a window should pop up asking you to log in. If you haven’t made any changes you should be able to put ‘admin’ into the username and ‘admin’ into the password field as well. Some Routers may have their password defaulted to ‘password’. You will have to check your router manual or with your network administrator to be sure. You can also search on Google to find out the defaults.

How to connect to the internet on a router?

Connect your modem to the internet port on your router. Usually your router will have one port for the internet connection. This port is usually away from the other ports on the back of the router which are for the devices which will be connecting to the internet. Use a cat5 cable for this connection.

How to connect to DVR externally?

In order for you to connect to your DVR internally or externally within your network, you’re going to have to make sure that your browser is able to download the web service from the DVR. Just go to Tools > Internet Options > Security. IE Tools Menu. In this tab, you will see a button that says Custom Level.

What is the HTTP port for DVR?

HTTP PORT: 88 (You can use port 80 but there are some Internet Service providers which block the use of port 80. I usually just change it to be on the safe side.) DVR Network Settings Menu. Configure Your Browser’s Security Settings In Order To Download the DVR Web Service.

How to port forward a DVR?

Forward the Ports. Find the window or tab that is either called ‘port forwarding’ or ‘apps and gaming’. Go ahead and add a new port forwarding rule. The application name field is where you will put in anything you want that is descriptive to the device you’re port forwarding. In this case you can just put in “DVRWEB” to signify the DVR Web Service connection. External Port can be 88 (or whatever port you set it to on step 2), Internal Port is also set to 88, Protocol will be ‘both’ tcp/udp and the Device IP will be the IP of the DVR. In this case you will make sure it’s ‘192.168.1.110’. Make sure the rule is enabled by checking the box if there is one and save the rule. Then do the same for your TCP And UDP ports that were set on the DVR.You should have:

What does it mean when your DVR is on and off?

when it’s “On” that means it’s using Google Chrome and when it’s off it is using Internet Explorer. So you see you can switch from Internet Explorer to Chrome within the same interface of Chrome. So that’s the cool feature right there that you don’t have to mess around to access your DVR from Internet Explorer if you are a Google Chrome user like I am. This is very easy and very intuitive tool that will allow you to access your DVR from Chrome.

Is Security Camera King a wholesaler?

Security Camera King is not just a Web wholesaler; we are a security manufacturing and distribution company that stands behind our product and we make sure to only sell CCTV Systems that we would use ourselves. We will never try to sell you something you wouldn't truly need. We also offer free technical assistance for the life of the product you have purchased from us. View all posts by Security Camera King

What is a hostname in DDNS?

For example, you can use a hostname such as mydvr.ddns.org that you will use instead of your IP address to access your DVR. You will use the hostname that you setup in the IP address / hostname field in the settings of your iOS app (and any other client app that you access your DVR using).

Can you access a surveillance DVR remotely?

The mobile app that you are using is not the problem. In order to have a stable setup so that you can access your surveillance DVR remotely over the Internet, you need to setup both port forwarding and a dynamic DNS account (DDNS).

What is agent DVR?

Agent DVR is a standalone replacement for iSpy that runs as a service, uses less CPU and features a web user interface that is accessible from anywhere with no port forwarding required!

What operating system does Agent DVR work on?

Download Agent DVR from here and run the installer. Agent runs as a console application (or as a service on Windows) on Windows 7+, Linux X64 (tested with Ubuntu 18.04+), OSX 64, Arm and Arm64 based operating systems (like Raspberry Pi).

How to stop agent service?

Stop the Agent service if it is running: Click Start - Run - Type "services.msc" - press enter. Right click "Agent" in the list and click Stop. You can prevent it from starting as a service when you reboot by right clicking on Agent, click Properties and set the startup type to "Disabled". Click Apply and OK.

How to move Agent to a new computer?

You can move Agent to a new computer easily - just copy the Agent directory to the new PC and delete it from the old one.

What is the port range for Agent?

Webrtc generally uses ports over 50000 so if you have problems connecting over the local network try allowing a LAN port range of 50000 - 65535 in your firewall (or use our website).

What to do if an anti virus app is blocking a local port?

If there is an anti virus app or firewall blocking Agent from listening on a local port then you may need to add Agent.exe to a safe list or open the port it is listening on in the local firewall.

Why use webrtc?

Why use the website?: Agent uses webrtc for media connections which gets around most firewalls and port forwarding issues. On your local network your web browser can connect directly to Agent but for remote access web browsers require SSL connections, STUN, TURN and relay servers for connection establishment which we provide via ispyconnect.com

How does Defender 1 step work?

The DEFENDER 1 Step™ Remote Viewingsoftware offers consumers a simple, less than five minute port forwarding solution never before seen in do-it-yourself security. Offered as a free download at www.defender-usa.com, the program guides users through the settings and options that need to be enabled on a DVR and router to begin port forwarding. Following the input of a DVR’s IP address, 1 Step will automatically sync the DVR to the router, allowing users to view their property from anywhere in the world with an Internet connection while saving up to two hours of set-up time. As a pioneer in D.I.Y. security with roots dating back to 1999, DEFENDER continues to transform the category with intuitive solutions that give consumers peace of mind knowing they have protected what they value most.

How long does it take to get 1 step remote viewing?

NIAGARA FALLS – February 26, 2013 – DEFENDER® is pleased to announce the release of 1 Step™ Remote Viewing, new proprietary software that makes viewing footage from a security system easily accessible in under five minutes.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9