The Router's GUI admin page can be made available on the WAN interface through the advanced menu. If it's on, you should turn it off. It's under "remote access." As far as the ability for Verizon's system to access WiFi settings, push firmware updates, and allow support to reset the router; that can't be disabled.
Full Answer
How do I Turn Off private Wi-Fi on my FiOS router?
Turn off Wi-Fi access using My Fios app If you have a Fios Quantum Gateway or a Fios Advanced Wi-Fi Router, using the My Fios app select. Internet > under My Networks select a network Enabled > switch Enable Private Wi-Fi Access off
How do I restart my Verizon FiOS router?
Your Fios Router will automatically restart with that configuration. Warning: Only select Reboot Router if instructed to do so by Verizon support. You can reboot your Fios Router using the Reboot Router Only feature. Refer to 1.3b/ REAR PANEL for power button options. Select Reboot Router in the Utilities section. To reboot, click Reboot Device.
Why can’t I access the UI on my FiOS router?
If you cannot access the UI, verify the computer connected to your Fios Router is set up to dynamically receive an IP address. I HAVE a FTP OR WEB SERVER ON MY NETWORK. HOW CAN I MAKE IT a VAILABLE TO USERS ON THE INTERNET? For a web server, enable port forwarding for port 80 to the IP address of the server.
What happens if I change the Wi-Fi name on my FiOS router?
Important: If you are on a Wi-Fi device when setting up your Fios Router, you will be disconnected from the Wi-Fi network when you change the Wi-Fi name or Wi-Fi password. When this occurs, your Fios Router will detect this situation and prompt you to reconnect using the new settings.
How do I disable Verizon router remotely?
The Router's GUI admin page can be made available on the WAN interface through the advanced menu. If it's on, you should turn it off. It's under "remote access." As far as the ability for Verizon's system to access WiFi settings, push firmware updates, and allow support to reset the router; that can't be disabled.
How do I disable remote access to my router?
To do this, open your router's web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it's disabled — it should be disabled by default on most routers, but it's good to check.
How do I block devices from my WiFi Verizon FIOS?
If you have a Fios Quantum Gateway or a Fios Advanced Wi-Fi Router, sign into My Verizon to set up parental controls. To make changes select: Internet > Manage My Devices > Devices & Parental Controls, select the device(s) you want to manage and follow the guided steps.
How do I access my FiOS router remotely?
2:283:26Verizon Fios router configuration -For remote desktop - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to click here more show options we're going to type the username of the computer thatMoreWe're going to click here more show options we're going to type the username of the computer that you want to connect to and we click connect and it will ask you for the password.
How do I make sure Remote Access is disabled?
Open System and Security. Choose System in the right panel. Select Remote Settings from the left pane to open the System Properties dialog box for the Remote tab. Click Don't Allow Connections to This Computer and then click OK.
Can someone else access my router?
Yes, it's absolutely possible for your home network to get hacked. There are a couple of ways hackers can gain access to your network. One common method is to guess the password. It sounds simple, but routers often come with a preset default password that the manufacturer uses for all devices.
How do I control devices connected to my WiFi?
Manage devices connected to your Wi-Fi networkSign in to Smart Home Manager.Choose Network, then Connected Devices. Only devices connected to your network will show.Select the device you want to view. Then, choose the more option (three dots). From here you can: Edit device details. Add the device to a profile.
Can you turn off WiFi to certain devices?
To block a certain device, you'll need to know its MAC address—a 12-digit number unique to that specific device. You can find a device's MAC address by checking your router's list of connected devices, which might be under the “Network Map,” “Client List,” or similarly named option.
How can I see who is connected to my Verizon WiFi?
View Connected Devices - Verizon 4G LTE Broadband RouterAccess the router configuration tool then click. Connected Devices. (on the left). ... A list of currently connected devices is displayed. To allow or block devices, refer to Access Control for additional assistance.
Can I log into my Verizon router remotely?
Re: FIOS Router - Remote Access to Home Network (resources) By default the administrator who does this will be allowed access. You can create other users and allow them access also, with less than admin rights. To use remote access the user MUST have a password as otherwise it won't allow connection.
How can I access my home Wi-Fi from anywhere?
Take Advantage of Windows Firstly, you need to add users to a “remote desktop” group. Then you need to forward a port past the firewall of your router to your target system. The next step is to enter the router's IP address. Finally, connect to your local system using Remote Desktop to your desired device.
How do I change the security settings on my Verizon router?
How can I change my Verizon MI424WR network to WPA encryption?Enter your router user name and password if prompted and click Ok. [ ... Click the Wireless Settings icon in the top toolbar. [ ... Click Advanced Security Settings in the left navigation panel. [ ... Select WPA in the Level 1 section to enable WPA network encryption.
Can I disable Remote Access Connection Manager?
Double-click Remote Access Connection Manager. In the Startup type list, click Disabled. Click Stop, and then click OK.
How do I disconnect other devices from my WiFi?
The easiest, most secure method is merely changing your Wi-Fi network's password on your router. This will forcibly disconnect all devices from your Wi-Fi network—even your own. You'll have to reconnect to the Wi-Fi network by entering the new password on all your devices.
Why do you turn off Wi-Fi when you are not using it?
Turning Wi-Fi off when you’re not using it improves network security and frees up some bandwidth for your wired devices. Maybe you don’t want to disable your Wi-Fi access completely, but would like to hide your Wi-Fi name so only people who know it have access to your Wi-Fi.
What devices can be disconnected to free up bandwidth?
Disconnect wireless devices not in use to free up bandwidth. This can include streaming devices, gaming systems and TVs
YourNameHere Registered Member
So I tried bumping the last thread about this subject, but it's too old.
lotuseclat79 Registered Member
With every installation of FIOS/w router, Verizon distributes a red bundle package labeled FIOS. In that package is a CD with documentation on their ActionTec router that contains instructions on how to de-install their router, and substitute another with an example of how to do it.
YourNameHere Registered Member
I actually did read your original post on this topic before making this thread.
lotuseclat79 Registered Member
Thinking about a way to access the router, instead of the usual browser based access, it is possible (or should be) to access the router via telnet - I have a link on how to turn off web activity logging and I'm pretty sure that is the way they accessed it, and then to turn off the logging they redirected to /dev/null via a symbolic link - it was a great post.
What happens if you change the DNS settings on a router?
What’s interesting is that, by changing the DNS settings on the router, users would actually believe they’ve landed on a legitimate webpage, except that it’s served from a different IP address. For example, when users type “example.com”, instead of the webpage being served from a legitimate IP address, it would be served from an attacker-controlled IP that’s resolved by the malicious DNS settings. If the attacker-controlled webpage is a spot-on facsimile, users would actually believe they’ve landed on a legitimate webpage, jud ging from the domain name in the browser’s address bar.
How often should I check my router firmware?
(You should at least be checking for new router firmware once a month or so, but that’s another story for another time.)
How to avoid malware?
The best way to avoid malware like this is a twofold approach. First, turn off remote management on your router. It’s typically buried in some kind of advanced settings menu, if it exists, so you’ll have to do a bit of digging to find it (or look up specific instructions for your router).
Do I need to tap into my router?
I highly doubt you’ll need to tap into your router’s settings when you aren’t at home, and remote management opens your device up to plenty of security issues. Consider the latest security warnings from BitDefender. Attackers are allegedly using brute-force techniques to guess their way into less-secure routers with Remote Management enabled—as well, router with any kind of cloud configuration option. Once they’ve done that, they’re messing with the router’s DNS settings to redirect users’ web requests to malware.
Does the average user have looked at their router config menu?
Doesn’t help that the average user has NEVER looked at their router config menu, that the menu probably has a low level interface from 1992, or that if it has been updated it is most likely a kiddy-gate interface blocking a lot of user access.
Can you use alternate ports in WHS 2011?
For WHS 2011 there's an absolute requirement for port 443, you can not use alternate ports there.
Can I use UPNP on a router?
AFAIK you should normally be able to configure this router using UPnP. If you can't get things working this way you may also try and use alternate ports, detailed documentation at wegotserved wiki site.