Controlling Remote Access:
- Open an Internet browser. Launch the Technicolor interface by visiting: http://192.168.1.1.
- Click the Sign In button in the top-right of the screen:
- Login using the username engineer and your password, which is the unique access key printed underneath your router. Note: the access key is ...
- Click Sign in to continue.
- You will now be taken back to the main Technicolor interface.
- You should now see a box for Assistance, which should be off by default. You can toggle whether this is enabled or disabled by using the on/off ...
Full Answer
How do I set up remote access to my Technicolor device?
Controlling Remote Access: Open an Internet browser. Click the Sign In button in the top-right of the screen: Login using the username engineer and your password, which is the unique access key printed underneath your router. Click Sign in to continue. You will now be taken back to the main Technicolor interface.
How do I turn off remote access on my router?
Disable Remote Access. To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled — it should be disabled by default on most routers, but it’s good to check.
How do I disable the remote assistance?
The remote assistance should disable itself automatically after 30 minutes of inactivity. In the Technicolor menu interface, click User Management in the Management box. From here you are able to add, edit and remove existing user accounts. Comment require login or registration .
How do I login to my Technicolor tc8717t router?
This is the login page from your Technicolor router. Enter the username and password for the Technicolor TC8717T in the corresponding boxes. Important Note: If you have changed them in the past, you need to enter in those values. To log in to your Technicolor TC8717T router, enter your username and password, and then click the Login button.
How do I disable remote access on my spectrum router?
Log into the router admin GUI on Web by entering 192.168.0.1 in the browser address bar.Enter the your admin username and password. The default user name and password are cusadmin and password, respectively.Click on Wireless.Under Wireless settings, check Disable Wireless Module.Click on Apply.
How do I block devices on my spectrum router?
From the Devices on Your Network screen, select the Connected or Not Connected device list. From the device list on the Devices on Your Network screen, swipe left on the device you would like to pause. Select Pause on the next screen to confirm. To unpause a device, select a device from the Paused list.
How do I disable port forwarding spectrum?
To manage an existing port assignment, select the port assignment's name. You'll see an overview of the reserved IP address and opened ports. To change the settings, select Manage Port Assignment. To remove port forwarding, select Delete Port Assignment and confirm.
How do I check my spectrum router settings?
How can I access my Spectrum router settings? Simply type in the IP address or URL, printed on the label at the rear of your Spectrum router, in the browser address bar. Make sure you are using the same internet connection as the router is on for which you wish to change the settings.
How do I kick devices off my WiFi?
The easiest, most secure method is merely changing your Wi-Fi network's password on your router. This will forcibly disconnect all devices from your Wi-Fi network—even your own. You'll have to reconnect to the Wi-Fi network by entering the new password on all your devices.
How do I control devices connected to my WiFi?
Manage devices connected to your Wi-Fi networkSign in to Smart Home Manager.Choose Network, then Connected Devices. Only devices connected to your network will show.Select the device you want to view. Then, choose the more option (three dots). From here you can: Edit device details. Add the device to a profile.
What is port forwarding spectrum router?
To port forward on Spectrum, you'll need a static IP address for your device and the ports used by the application. Your router dynamically assigns an IP address to every device that connects to it. Static IP ensures that external networks can communicate with the correct device even if the router restarts.
Does spectrum block ports?
To protect the privacy and security of its network and its customers, Charter Communications blocks internet ports that are vulnerable to exploitation by malicious software.
How do I disable DHCP on my spectrum router?
To disable the DHCP server feature in the cable modem router:Launch a web browser from a computer or mobile device that is connected to your cable modem router's network.Enter the router user name and password. ... Select ADVANCED > Setup > LAN Setup. ... Clear the Use Router as DHCP Server check box.Click the Apply button.
How do I change the security settings on my spectrum router?
To change your Spectrum WiFi name and password with your account information, use a web browser to go to spectrum.net. Then click Services > Internet and select Manage Network. Finally, enter a new password and network name and click Save.
How do I manage my router settings?
How to Change Your Wireless Router Settings. ... Connect to your network wirelessly, or via ethernet. ... Find your router configuration page. ... Log in with the username and password. ... Find the Wireless Settings page. ... Set the new channel, usually with a dropdown menu. ... Your router will now reboot. ... Troubleshooting.
How do I get into my routers settings?
Your router's IP address is shown next to 'Router'...In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings:Make sure your phone is connected to your router's Wi-Fi network.Tap on the network name.Look for a 'gateway', 'router' or other entry in the list.
Can someone see what I do on my phone through WiFi?
Simple answer: No, a person can not see what is on your phone, but can see what you are sending and receiving in the clear.
How many devices can you have on Spectrum WiFi?
You can still connect to Spectrum Mobile service automatically by downloading the Spectrum Mobile Account app. Note: You can only connect up to five devices to Spectrum WiFi at the same time.
How many devices are connected to my WiFi router?
Enter your router's admin password and tap the LOGIN button. The dashboard displays. Swipe up on the network information panel. The devices that are connected to your router display.
About this guide
This guide covers how to further secure a Technicolor TG589VAC v2 router by ensuring the security of the user accounts, and controlling whether external access to the router web interface is allowed.
Controlling Remote Access
Open an Internet browser. Launch the Technicolor interface by visiting: http://192.168.1.1
How does a DCI401MCS remote work?
The DCI401MCS remote control communicates with the unit via a Radio Frequency (RF) signal. Unlike typical infrared remotes (IR) the RF signal does not require a line of site between the remote and the box. This allows the unit to be mounted in a discrete location without the need for remote IR receivers. Since the RF signal could possibly send unwanted commands to nearby boxes each remote needs to be assigned or paired to a unit.
How to activate IPG on COM46?
Navigate to the EPG tab of the COM46 user interface. To activate the IPG you must enter a 3 in the Mode field. Do not enter an IP address or port assignment. Set the Timezone offset and Timezone Psip fields to reflect your location.
How to connect a DCI401MCS to a TV?
However in a testing environment the unit has performed well between -5dBmV and +17dBmV. Connect the unit to the TV via provided HDMI cable. The DCI401MCS RF coaxial output s only standard definition. If possible set the TV to default to the HDMI input used. When planning an installation remember that the DCI401MCS needs AC power. If TVs are wall mounted there must be adequate room to plug in the power adaptor. Which measures 3”H X1.5”W X 1.5” D
How to use DCI401MCS?
When used with a Technicolor COM2000 head end system the DCI401MCS provides your customers the convenience of an interactive channel guide similar in operations to a DIRECTV set top box. The guide is accessed by pressing the guide button on the DCI401MCS remote. Using the arrows on the remote control a viewer can scroll through the guide and tune to the highlighted channel using the select button.
What card can send commands to DCI401MCS?
The COM46 card can send commands and feature sets to the DCI401MCS. From the drop down menu on the 401 tab you can select several options.
How to check DCI401MCS version?
You can verify the software version by navigating to the DCI401MCS Setup page. This page also displays the input power level and SnR. Use the DCI401MCS remote and navigate to the Menu > System Info page.
What is the settings option on a COM2000?
Important information from this screen is: ➢ The Unit Identifier Unit Identifier number should be documented along with the location of the unit to facilitate direct access to specific DCI401MCS boxes from the COM2000 interface.
Should I get my own router?
I'd consider getting your own router that you have more control over if this is a critical feature to you. You'll save the rental fee as well.
Does DDNS support remote management?
Have you found other documentation to indicate it supports this feature? DDNS does not mean it supports remote management/administration. In fact, I would be surprised if this would be enabled on ISP-provided equipment. Too many security risks.
What is a Technicolor TC8717T router?
September 24, 2019 (Last Updated: July 14, 2021) | Reading Time: 5 minutes. A Technicolor TC8717T router contains a basic firewall to help protect your home network. A Firewall blocks incoming connections by nature. Sometimes you need to unblock some of these connections so you can run a game or application.
How to ensure ports remain open after reboot?
If you want to ensure that your ports remain open even after your device reboots, set up a static IP address in the device that you are opening a port for.
How to disable remote access on router?
To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled — it should be disabled by default on most routers, but it’s good to check.
What is a router web interface?
Routers offer a web interface, allowing you to configure them through a browser. The router runs a web server and makes this web page available when you’re on the router’s local network. However, most routers offer a “remote access” feature that allows you to access this web interface from anywhere in the world.
What is XSS in router?
A router with such an XSS flaw could be controlled by a malicious web page, allowing the web page to configure settings while you’re logged in. If your router is using its default username and password, it would be easy for the malicious web page to gain access.
How to avoid UPNP?
To avoid UPnP-based problems, disable UPnP on your router via its web interface. If you use software that needs ports forwarded — such as a BitTorrent client, game server, or communications program — you’ll have to forward ports on your router without relying on UPnP.
What happens if someone gets access to your Wi-Fi?
If someone gains access to your Wi-Fi network, they could attempt to tamper with your router — or just do other bad things like snoop on your local file shares or use your connection to downloaded copyrighted content and get you in trouble. Running an open Wi-Fi network can be dangerous.
How to prevent Wi-Fi from being compromised?
To prevent this, ensure your router’s Wi-Fi is secure. This is pretty simple: Set it to use WPA2 encryption and use a reasonably secure passphrase. Don’t use the weaker WEP encryption or set an obvious passphrase like “password”.
Do consumer routers have security patches?
Consumer routers are shaping up to be a perfect storm of security problems — they’re not automatically updated with new security patches, they’re connected directly to the Internet, manufacturers quickly stop supporting them, and many consumer routers seem to be full of bad code that leads to UPnP exploits and easy-to-exploit backdoors. It’s smart to take some basic precautions.