The DNS-323 is designed for easy installation and allows remote access to important data via your local network or the Internet. • Two Hard Drive Bays for 3.5” SATA Hard Drives of Any Capacity1 • Simplified Hard Drive Installation Process – No Tools Required • Four Hard Drive Configurations: Standard, JBOD (Linear), RAID 0, and RAID 12
Full Answer
What is a dns-323?
DNS‑323. The D-Link ® 2-Bay Network Storage Enclosure (DNS-323) when used with two internal 3.5” SATA drives 1 enables you to share documents, files, and digital media such as music, photos, and video with everyone on your home or office network. With the built-in FTP server 2, you can access your files remotely over the Internet ...
How do I map a D-Link dns-323 drive?
You can use the D-Link Easy Search Utility to map drives to your computer. Insert the DNS-323 CD into your CD-ROM drive. Click Easy Search Utility. The Easy Search Utility will load and detect any DNS-323 devices that are on the local network.
How many users can access the dns-323 FTP server?
The FTP server can be configured to allow user access to specific directories, and will allow up to 10 users to access the DNS-323 at a time. This section contains the configuration settings for the DNS-323 FTP Server.
How do I Reset my dns-323 to default settings?
Step 1. HW reset Turn the device on and wait for leds constantly glowing. Then push thin wire to reset hole, hold for at least 10s, and release the wire. Wait for leds constantly glowing again. Check what IP address is assigned to DNS-323 (read it from your DHCP server, or try ping through DHCP range).
What is DNS-323?
How to install DNS-323?
How to power down DNS 323?
How many users can be on DNS-323?
What is network access?
Why is DNS-323 important?
What is the default quota setting?
See 4 more
About this website
How do I access DNS-323?
The simplest way to access your DNS-323 is to use theEasy Search Utility provided on the CD-ROM. Thiswill automatically detect any DNS-323 devices on your network,allow you to set up network drives in Windows, perform basicconfiguration and access the web configuration interface.
What DNS-323?
The DNS-323 includes the latest BitTorrent® software support so you can access and store digital media from the Internet without the need for a dedicated PC to be turned on or connected. The DNS-323 connects directly to your home or office network and acts as a media hub for BitTorrent-enabled content.
How do I setup my D-Link DNS-323?
3:155:16Getting Started: DNS-323 Network Storage - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet's go to our computer and set up the software insert the CD that came with the dns-323. Into yourMoreLet's go to our computer and set up the software insert the CD that came with the dns-323. Into your computer. If prompted go ahead and run the application.
How do I map a DNS-323 drive?
Step 1: For Vista or Win7 this command line is located right above the Windows Button., Click Start and Click Run ,and type \\IP of D-Link DNS-323 (eg. \\192.168. 0.132) and press OK. Step 2: Right Click the drive/folder in which to access and Select Map Network Drive (Volume_1 used in this example).
How do I reset my DNS 323?
To reset the DNS-313/323, access the management (web GUI), go toTOOLS - SYSTEM and press Restore. Allow a minute for the device to reset. If you cannot reach the web UI, locate the reset button on theback of the DNS-313/323.
How do I access my Dlink NAS?
0:142:45How to log into a ShareCenter NAS - YouTubeYouTubeStart of suggested clipEnd of suggested clipAddress by doing that you should be taken to the login page for your nas. Now if you're not sureMoreAddress by doing that you should be taken to the login page for your nas. Now if you're not sure what your ip address is d-link has a search utility that will help you easily find that ip. Address.
How do I access my DNS 320?
How to Access the Web Interface of the DNS-320 Remotely using D-Link RouterPut a check mark on the row to enable the rule.Enter a name for the policy you would like to create.Enter the IP Address of the DNS-320 (On Step 2)Enter Port 80 both on Public and Private port.
How can I access my DNS-323? | D-Link UK
The simplest way to access your DNS-323 is to use theEasy Search Utility provided on the CD-ROM. Thiswill automatically detect any DNS-323 devices on your network,allow you to set up network drives in Windows, perform basicconfiguration and access the web configuration interface.
Download D-Link DNS-323 Rev.A1B1C1 NAS Alt-F Firmware 0 ... - softpedia
It is highly recommended to always use the most recent driver version available. Try to set a system restore point before installing a device driver.
D-Link DNS-323 Default Router Login and Password - Clean CSS
Find the default login, username, password, and ip address for your D-Link DNS-323 router. You will need to know then when you get a new router, or when you reset your router.
How do I log into my DNS-323
How do I log into my DNS-323? When first powered on, the DNS-323 will wait to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32.
DNS-323 - D-Link Technical Support
SETUP: Wizard The Wizard is an easy to use utility for basic setup of the DNS-323. Here you will configure the administrator's password, time, LAN connection type, and additional settings of your DNS-323.
How do I factory reset the DNS-313/323? | D-Link UK
To reset the DNS-313/323, access the management (web GUI), go toTOOLS - SYSTEM and press Restore.Allow a minute for the device to reset.. If you cannot reach the web UI, locate the reset button on theback of the DNS-313/323.
What is DNS-323?
The DNS-323 features a UPnP AV Server. This server provides the ability to stream photos, music and videos to UPnP AV compatible network media players. If the server is enabled, the DNS-323 will be automatically detected by UPnP AV compatible media players on your local network.
How to install DNS-323?
1. Access the drive bays by sliding the faceplate up until it unlatches from the device. 2. Once the faceplate is unlatched, pull it off the device, exposing the drive bays. This section provides unpacking and installation information for the DNS-323. Open the shipping carton for the DNS-323 and carefully unpack its contents. To install the DNS-323 on your local network, refer to the steps below:
How to power down DNS 323?
Press once to power on the DNS-323. Press and hold the button until it begins to blink to power down the DNS-323.
How many users can be on DNS-323?
The DNS-323 supports up to 64 unique users. The users can be specified by group, or created individually. The users are created to allow access to specific folders on the DNS-323, via FTP or the local network.
What is network access?
The Network Access settings allow you to assign users and groups to specific folders or volumes. By default, all users are allowed Read/Write access to all volumes. Before specific user or group rules can be created, the default rules must be deleted.
Why is DNS-323 important?
It is important that accurate time is set so that scheduled backups and downloads will be accurate.
What is the default quota setting?
By default, all users and groups are displayed on the Quota Settings page. Users and groups are automatically listed on this page, and cannot be deleted. The default quota setting is “Unlimited”.
What is DNS 323?
The DNS-323 includes the latest BitTorrent ® software support so you can access and store digital media from the Internet without the need for a dedicated PC to be turned on or connected. The DNS-323 connects directly to your home or office network and acts as a media hub for BitTorrent-enabled content. The DNS-323 also acts as an UPnP™ AV media ...
What is a D-Link 2 bay?
The D-Link 2-Bay Network Storage Enclosure (DNS-323) when used with internal SATA drives1 enables you to share documents, music, photos, and video across the network and on the Internet so family members, friends, or employees can access them. This network storage enclosure creates a central network point for backing up valuable files and the built-in RAID 1 mirroring technology 1 protects these files from drive failure. You can also use this device to stream photos, music, and videos to UPnP AV compatible network media players 3.
What is a D-Link product?
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
Does DNS-323 back up?
The DNS-323 can automatically back up your data regardless of your computer’s operating system (Windows ®, Mac ®, or Linux ® ). For Windows users, the included feature-rich backup software can help you create schedules and rules including real-time full or incremental backups and storage quotas for specific users and groups.
Does 3 D link work with all codecs?
3 D-Link cannot guarantee full compatibility or proper playback with all codecs. Playback compatibility depends on the codec support of the UPnP™ AV media player.
Can you access FTP server 2?
With the built-in FTP server 2, you can access your files remotely over the Internet from anywhere in the world and keep data safe by only giving rights to specific users or groups. When configuring the DNS-323, you can create users and groups and assign them to folders with either read or read/write permissions.
What is DNS 323?
The D-Link DNS-323 2-Bay Network Storage Enclosure shares your documents, photos, music, and videos across the network and on the Internet (via FTP server) so family members, friends, or employees can access them. This enclosure, which can hold two 3.5” SATA hard drives of any capacity1, creates a central network point for backing up valuable files. The built-in RAID 12mirroring technology protects these files from drive failure. Other options such as Standard, JBOD, and RAID 0 are also available. The DNS-323 shares files over the Internet via the built-in FTP server3. Users and groups can be created and assigned to folders with either read or read/write permissions. Quotas can be set per user or group to restrict space usage. In addition, the DNS-323 can be used to stream photos, music, and videos to UPnP AV compatible network media players4. The included CD contains D-Link’s Easy Search Utility. This utility allows you to locate the DNS-323 on the network and map drives to your computer. Backup software is also included on the CD. This software allows you to backup your files from a computer to the DNS-323 manually, by a schedule, or in real-time. Real-time backups are a great way to safeguard against unfortunate accidents that may result in the loss of important files. Combining ease of use with practical and high performance features, the DNS-323 is an organized solution for any network. Free up drive space on computers and centralize data on your network with the DNS-323 2-Bay Network Storage Enclosure!
How to install DNS-323?
1. Access the drive bays by sliding the faceplate up until it unlatches from the device. 2. Once the faceplate is unlatched, pull it off the device, exposing the drive bays. This section provides unpacking and installation information for the DNS-323. Open the shipping carton for the DNS-323 and carefully unpack its contents. To install the DNS-323 on your local network, refer to the steps below:
How to set LAN link speed?
The LAN Link Speed is set to Auto by default, but can be manually set to 100Mbps or 1000Mbps. Selecting DHCP Client will cause the DNS-323 to obtain an IP address from the local DHCP server. Selecting Static IP requires you to assign the IP information for the DNS-323 manually. Click the Enable radio button next to Statusto enable jumbo frames. Select an MTU rate that your network can support and then click Apply to activate the new setting.
What is the port on a D-Link DNS 33?
D-Link DNS-33 User Manual Section 1 - Product Overview Power Receptacle: The 12V 3A / 5V 3A power supply connects here. Ethernet Port: A Gigabit Ethernet port that connects the DNS-323 to a network. USB Port: USB Print Server port for connecting a USB printer. Drive Eject Lever: Use the levers to eject the hard drives. The front panel must be removed before ejecting the drives. Reset Button: A pinhole button located beside the Ethernet socket is used to reset the DNS-323 to the factory default settings.
How many users can be on DNS-323?
The DNS-323 supports up to 64 unique users. The users can be added to a group, or individually. The users and groups are created to allow access to specific folders on the DNS-323, via FTP or your local network.
What is the default DNS-323 name?
This is useful if there are more than one DNS-323 on the network. By default the device name is dlink-xxxxxx, where xxxxxx is the last six digits of the MAC address. Assigns a device description to the DNS-323.
What is the default quota setting?
Users and groups are automatically listed on this page, and cannot be deleted. The default quota setting is “Unlimited”. To add a quota:
Product Description
The D-Link ShareCenter 2-Bay Network Storage Enclosure (DNS-323) connects to your network instead of to a computer so everyone on your network can back up content to one central location.
From the Manufacturer
The D-Link ShareCenter 2-Bay Network Storage Enclosure (DNS-323) connects to your network instead of to a computer so everyone on your network can back up content to one central location.
Step 1. HW reset
Turn the device on and wait for leds constantly glowing. Then push thin wire to reset hole, hold for at least 10s, and release the wire.
Step 4. Install FunPlug with Telnet enabled
See details at http://wiki.dns323.info/howto:fun_plug (chapter Transfer using FTP)
Step 6. Install repository for local use
See at http://nas-tweaks.net/CH3SNAS:Tutorials/ffp-packages See at http://ffp.wolf-u.li/additional/
Step 8. Install NTP Time synchronisation
See a complete Tutorial at http://nas-tweaks.net/CH3SNAS:Tutorials/ntp See at http://wiki.dns323.info/howto:ffp (chapter NTP Network Time Protocol)
Step 9. Install Lighttpd web server
See a complete Tutorial at http://nas-tweaks.net/CH3SNAS:Tutorials/lighttpd See at http://wiki.dns323.info/howto:lighttpd_php (chapter Easy Ways ) See at http://wiki.dns323.info/howto:ffp (chapter Lighttpd Web Server)
Step 11. Add MySQL packages into to Lighttpd
See a complete Tutorial at http://nas-tweaks.net/CH3SNAS:Tutorials/Mysql See at http://forum.dsmg600.info/viewtopic.php?id=3466
General discussion
I have very frequent BSODS when using win7 Build7000 to access SAMBA shares or shares on my d-link DNS313 and DNS323 boxes.
All replies
I would also like to mention that in the current Beta program the system for reporting bugs properly is virtually non-existent. I was in the beta program for Vista through connect and then at least it was possible to submit a bug and get proper feedback. I think this is a step back...
What is DNS-323?
The DNS-323 features a UPnP AV Server. This server provides the ability to stream photos, music and videos to UPnP AV compatible network media players. If the server is enabled, the DNS-323 will be automatically detected by UPnP AV compatible media players on your local network.
How to install DNS-323?
1. Access the drive bays by sliding the faceplate up until it unlatches from the device. 2. Once the faceplate is unlatched, pull it off the device, exposing the drive bays. This section provides unpacking and installation information for the DNS-323. Open the shipping carton for the DNS-323 and carefully unpack its contents. To install the DNS-323 on your local network, refer to the steps below:
How to power down DNS 323?
Press once to power on the DNS-323. Press and hold the button until it begins to blink to power down the DNS-323.
How many users can be on DNS-323?
The DNS-323 supports up to 64 unique users. The users can be specified by group, or created individually. The users are created to allow access to specific folders on the DNS-323, via FTP or the local network.
What is network access?
The Network Access settings allow you to assign users and groups to specific folders or volumes. By default, all users are allowed Read/Write access to all volumes. Before specific user or group rules can be created, the default rules must be deleted.
Why is DNS-323 important?
It is important that accurate time is set so that scheduled backups and downloads will be accurate.
What is the default quota setting?
By default, all users and groups are displayed on the Quota Settings page. Users and groups are automatically listed on this page, and cannot be deleted. The default quota setting is “Unlimited”.
